Airworthiness Directives 2004 - Revocation and Remaking - Schweizer (Hughes) 269 Series Helicopters (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Schweizer (Hughes) 269 Series Helicopters

AD Name  AD Number

Rod End Bearings - CANCELLED  AD/HU 269/1

Belt Drive Idler Pulley Assembly - CANCELLED  AD/HU 269/2

Landing Gear and Horizontal Stabilizer Attachment - CANCELLED                 AD/HU 269/3

Bracket Assembly Belt Guide and Support - CANCELLED  AD/HU 269/4

Belt Drive Idler Pulley Arm - CANCELLED  AD/HU 269/5

Main Rotor Blade Spacers - CANCELLED  AD/HU 269/6

Lower Pulley Coupling Shaft - CANCELLED  AD/HU 269/7

Clutch Control Handle Down Lock - CANCELLED  AD/HU 269/8

Collective Pitch Friction Guide - CANCELLED  AD/HU 269/9

Lower Coupling Drive Shaft - Inspection and Replacement  AD/HU 269/10

Main Rotor Blade - Inspection  AD/HU 269/11 Amdt 3

Main Rotor Blade Flapping Hinge - Inspection  AD/HU 269/12

Belt Drive Idler Pulley Bearing - CANCELLED  AD/HU 269/13 Amdt 1

Battery Support Bracket - Inspection  AD/HU 269/14

Impeller Flywheel Assembly - CANCELLED  AD/HU 269/15

Horizontal Stabiliser - Inspection  AD/HU 269/16 Amdt 4

Tail Rotor Transmission Housing - Inspection  AD/HU 269/17

Tail Boom - Inspection  AD/HU 269/18

Engine Mount Hanger - Inspection  AD/HU 269/19 Amdt 1

Fuel Injection Lines - CANCELLED  AD/HU 269/20 Amdt 1

Main Rotor Blades - Inspection  AD/HU 269/21 Amdt 3

Belt Drive Idler Pulley Pivot Shaft - CANCELLED  AD/HU 269/22

Main Rotor Gear Drive Assembly - Inspection and Replacement  AD/HU 269/23 Amdt 8

Cabin Sealing - CANCELLED  AD/HU 269/24

Lateral Control Bellcrank (P/N 269A7506) - Replacement  AD/HU 269/25 Amdt 1

Retirement Life - Critical Components  AD/HU 269/26 Amdt 16

Lower Coupling Drive Shaft - Inspection  AD/HU 269/27 Amdt 1

Main Rotor Thrust Bearing P/N 269A5050-50 or  -51 Nut and Mast - Inspection          AD/HU 269/28 Amdt 3

Tail Rotor Blade Assembly - Inspection  AD/HU 269/29

Main Rotor Mast - Inspection - CANCELLED  AD/HU 269/30 Amdt 3

Tail Rudder Pedal Arms - CANCELLED  AD/HU 269/31

Tail Rotor Gearbox - Inspection and/or Replacement  AD/HU 269/32 Amdt 1

Main Rotor Mast - Inspection for Internal Corrosion  AD/HU 269/33

Hinge Bolts - CANCELLED  AD/HU 269/34 Amdt 1

Main Rotor Drive Shaft - Inspection for Corrosion  AD/HU 269/35 Amdt 1

Main Rotor Blade Thrust Bearing - CANCELLED  AD/HU 269/36

Main Rotor Lead - Lag and Flapping Hinge Bolts P/N HS1446-10-68 Vendo    AD/HU 269/37

Tail Boom Support Struts - CANCELLED  AD/HU 269/38 Amdt 1

Engine Exhaust System - Inspection  AD/HU 269/39 Amdt 1

Main Rotor Hub and Shaft Assemblies P/Nos 269A5305 and 269A5305-9 -     AD/HU 269/40

Main Rotor Thrust Bearing P/N 269A5050-73 - Inspection for Runout             AD/HU 269/41

Belt Driven Idler Pulley Assembly - CANCELLED  AD/HU 269/42 Amdt 1

Clutch Handle Latch - CANCELLED  AD/HU 269/43

Tail Rotor Control Stop - Inspection  AD/HU 269/44

Magneto Distributor Bushing - Inspection, Lubrication and Replacement -        AD/HU 269/45 Amdt 1

Magneto Grommet - Replacement - CANCELLED  AD/HU 269/46

Main Rotor Blade Root Fitting Bolts - Main Rotor Blade Damper Bolts -          AD/HU 269/47

Canopy Slat - Inspection and Modification  AD/HU 269/48 Amdt 1

Engine Cooling Impeller - Bolt Inspection  AD/HU 269/49

Main Rotor Mast and Tailboom Supports - Inspection and Modification            AD/HU 269/50 Amdt 1

Tail Rotor Control System Pedal Installation - Inspection and Modification    AD/HU 269/51 Amdt 1

Linear Clutch Actuator - Inspection  AD/HU 269/52

Fibreglass Tail Rotor Blades - Inspection  AD/HU 269/53

Collective Pitch Throttle Gear - Inspection and Replacement  AD/HU 269/54

Lateral Cyclic Trim Control Assembly - Inspection  AD/HU 269/55

Tailboom Support Strut End Fittings - Inspection and Modification                   AD/HU 269/56

Centre Frame Aft Cluster Fitting  AD/HU 269/57 Amdt 4

Linear Clutch Actuator End Fitting and Shaft - Inspection  AD/HU 269/58

Cockpit Placard - Removal  AD/HU 269/59

Throttle Control Cable - Inspection - CANCELLED  AD/HU 269/60

Fuel Tank Sump Cap Attachment - Inspection  AD/HU 269/61

Tail Rotor Hub - Inspection and Modification  AD/HU 269/62 Amdt 1

Main Transmission Pinion Assembly - Inspection - CANCELLED  AD/HU 269/63 Amdt 2

Tail Rotor Assembly - Component Replacement, Inspection and Revised          AD/HU 269/64 Amdt 1

Tail Rotor Blade Corrosion  AD/HU 269/65 Amdt 1

Tail Rotor Swashplate Bearing Locknut - Increase in Torque  AD/HU 269/66

Tailboom Centre Attachment Fitting  Assembly - Inspection  AD/HU 269/67 Amdt 2

Lower Pulley Bearings and Housings - Inspection  AD/HU 269/68 Amdt 1

Alternator Circuit Protection - Modification  AD/HU 269/69

Main Rotor Thrust Bearing P/N 269A5050-73 - Inspection  AD/HU 269/70

Consolidation of Certain Early Airworthiness Directives - Older Model Hughes              AD/HU 269/71

Idler Pulley Support Bracket - Inspection  AD/HU 269/72

Main Gearbox Ring Gear - Inspection and Increase of Bolt Torque  AD/HU 269/73

Belt Drive Pulley H-Frame Tie Bar Bracket - Inspection  AD/HU 269/74

Tail Rotor Blade Root Bushing Holes and Retention Bolts - CANCELLED       AD/HU 269/75 Amdt 2

Main Rotor Damper Pitch Bearing Case - Inspection and Modification             AD/HU 269/76

Inertia Reel Shoulder Harness - Inspection  AD/HU 269/77

Tail Rotor Pitch Control Link Assembly  AD/HU 269/78

Main Rotor Drive Shaft  AD/HU 269/79 Amdt 1

Throttle and Governor Control Cable Assemblies  AD/HU 269/80

Main Transmission Assembly  AD/HU 269/81

Main Rotor Blade Elastometric Dampers  AD/HU 269/82 Amdt 1

Tail Rotor Fork Bolt  AD/HU 269/83

Thrust Bearing Tube  AD/HU 269/84

Tail Rotor Blade Abrasion Strip  AD/HU 269/85 Amdt 2

Belt Drive Upper Pulley Assembly  AD/HU 269/86

Tail Rotor Attachment Area  AD/HU 269/87

Collective Pitch Mixer Bellcrank  AD/HU 269/88

Droop Stop Nut  AD/HU 269/89

Engine Lower Coupling Drive Shaft Boot - CANCELLED  AD/HU 269/90 Amdt 1

Main Transmission Pinion Assembly  AD/HU 269/91

Centre Frame Aft Cluster Fittings  AD/HU 269/92

Tail Rotor Blade Spar  AD/HU 269/93

Main Rotor Pitch Bearing Snap Ring Lockwasher  AD/HU 269/94

Cyclic Pitch Control  AD/HU 269/95

Throttle Cable Assembly  AD/HU 269/96

Rotor Blades  AD/HU 269/97

Tailboom Centre Attachment Fitting  AD/HU 269/98

Main Rotor Drive Shaft Inspection  AD/HU 269/99 Amdt 1

Clutch Control Spring  AD/HU 269/100 Amdt 1

Throttle Control Linkage Restriction  AD/HU 269/101

Cyclic Control Column  AD/HU 269/102 Amdt 1

Lower Coupling Drive Shaft  AD/HU 269/103

Rudder Pedal Bulkhead Gusset  AD/HU 269/104

Tailboom Support Struts  AD/HU 269/105

Main Transmission Pinion Assembly and Ring Gear  AD/HU 269/106

Main Rotor Blade Abrasion Strip  AD/HU 269/107

Main Rotor Blade Abrasion Strip  AD/HU 269/108

Tail Rotor Swashplate Shaft Inspection  AD/HU 269/109 Amdt 1

Tail Rotor Fork Bolt  AD/HU 269/110 Amdt 1