Airworthiness Directives 2004 - Revocation and Remaking - Piper Pa-28 Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Piper PA-28 Series Aeroplanes

AD Name  AD Number

CANCELLED  AD/PA-28/1

Rudder and Stabilator Control Cables, Installation of Fairleads - Modification    AD/PA-28/2

CANCELLED  AD/PA-28/3 Amdt 1

Control Wheel - Inspection  AD/PA-28/4 Amdt 5

CANCELLED  AD/PA-28/5

CANCELLED  AD/PA-28/6

Magneto Radio Interference Filters - Modification  AD/PA-28/7 Amdt 1

Rudder Trim Installation  AD/PA-28/8

Battery Lead Attachment - Inspection and Modification  AD/PA-28/9

Centre Safety Belt Attachment - Inspection  AD/PA-28/10

CANCELLED  AD/PA-28/11

CANCELLED  AD/PA-28/12 Amdt 1

Aileron and Stabilator Balance Weight Assembly and Rudder Horn Assembly - AD/PA-28/13 Amdt 3

CANCELLED  AD/PA-28/14 Amdt 3

CANCELLED  AD/PA-28/15

Aileron Spar Cracking  AD/PA-28/16 Amdt 2

CANCELLED  AD/PA-28/17

Wing Rear Spar Attachment Bolts - Inspection  AD/PA-28/18

CANCELLED  AD/PA-28/19

CANCELLED  AD/PA-28/20

Replaced by AD/GENERAL/45 - CANCELLED  AD/PA-28/21

CANCELLED  AD/PA-28/22

Rudder Trim Arm Assembly Cracking  AD/PA-28/23 Amdt 2

Control Wheel Retaining Pin - Modification  AD/PA-28/24

CANCELLED  AD/PA-28/25 Amdt 1

CANCELLED  AD/PA-28/26

Exhaust System - Inspection - CANCELLED  AD/PA-28/27

Stabilator and Balance Weight Tube Assembly - Inspection  AD/PA-28/28 Amdt 2

CANCELLED  AD/PA-28/29

Engine Mount Tubes - Inspection  AD/PA-28/30

Seat Frame - Modification  AD/PA-28/31

Pitch Trim Switch - Modification  AD/PA-28/32

Front Seat Restraint Installation - Modification  AD/PA-28/33

CANCELLED  AD/PA-28/34

Main Landing Gear Torque Links - Inspection  AD/PA-28/35 Amdt 1

Stabilator Hinge Attaching Bolts - Inspection  AD/PA-28/36

CANCELLED  AD/PA-28/37

Stabilator Hinge Attaching Bolts - Inspection  AD/PA-28/38

Stabilator - Inspection and Drilling of Drain Holes  AD/PA-28/39

Wing Rear Spar - Inspection  AD/PA-28/40 Amdt 1

Rapid Throttle Movement - Warning Placard  AD/PA-28/41

CANCELLED  AD/PA-28/42

Rudder Bar Assembly - Inspection and Modification  AD/PA-28/43

Rear Seat Belt Attachment - Modification  AD/PA-28/44

Gross Weight - Reduction  AD/PA-28/45

Wing Reinforcement - Modification  AD/PA-28/46

Automatic Pilot Roll Servo Shear Pin - Installation  AD/PA-28/47

Outer Wing Spar - Inspection  AD/PA-28/48

Air Conditioning System - Modification  AD/PA-28/49

Main Landing Gear Cylinder Cracking - CANCELLED  AD/PA-28/50 Amdt 1

Aileron Centring Cable - Inspection  AD/PA-28/51

Nose Landing Gear - Inspection and Modification  AD/PA-28/52

Pre-Certification Requirements - Modification  AD/PA-28/53

Spin Prohibition Placard  AD/PA-28/54

Fuel Valve - Replacement  AD/PA-28/55

Quick-Disconnect Seat Retention Mechanism - Inspection  AD/PA-28/56

Nose Landing Gear Trunnion - Inspection  AD/PA-28/57

Wing Structural Fatigue Life Limitation  AD/PA-28/58

Fuel Selector Valve - Inspection and Replacement  AD/PA-28/59

Carburettor Air Filter Box - Modification  AD/PA-28/60

Lower Cowl Drain - Inspection and Modification  AD/PA-28/61

Fuel Selector Valve - Inspection  AD/PA-28/62

Fuel Filler Cap - Inspection and Replacement  AD/PA-28/63

Fuel Line - Inspection  AD/PA-28/64

Fuel Tank Vent - Inspection and Modification  AD/PA-28/65

Fuel Selector Control System - Modification  AD/PA-28/66

Electric Pitch Trim Switch - Modification  AD/PA-28/67

CANCELLED  AD/PA-28/68

Engine Cowling - Drain Hole Provision  AD/PA-28/69

Fuel Drain Cover - Replacement  AD/PA-28/70

Nose Landing Gear Down Lock - Modification or Replacement  AD/PA-28/71

Fuel Gascolator - Inspection  AD/PA-28/72

Hose Assembly - Inspection and Modification  AD/PA-28/73

Fuel and Vapour Return Lines - Modification  AD/PA-28/74

Carburettor Nozzle - CANCELLED  AD/PA-28/75 Amdt 1

Carburettor Nozzle - CANCELLED  AD/PA-28/76 Amdt 1

Fuel Line Union Fittings - Inspection  AD/PA-28/77

Fuel Tank Vent and Vent Hose - Modification and Replacement  AD/PA-28/78

Exhaust Muffler Assembly - Inspection - CANCELLED  AD/PA-28/79

Ammeter Installation Modification - CANCELLED  AD/PA-28/80 Amdt 1

Fuel Filter Drain Valve - Replacement  AD/PA-28/81

Rudder Torque Tube Attachment Fitting and Hardware - Inspection                   AD/PA-28/82

Battery Protection and Rear Seat Installation - Inspection  AD/PA-28/83

Nose Landing Gear - Inspection and Modification Parts I and II  AD/PA-28/84

Battery Strap Installation  AD/PA-28/85

Ammeter Installation  AD/PA-28/86 Amdt 1

Stabilator Attach Fitting Corrosion  AD/PA-28/87

Aft Centre of Gravity Restriction  AD/PA-28/88 Amdt 3

Aircraft Repair  AD/PA-28/89

Nose Gear Drag Link  AD/PA-28/90

Main Landing Gear Side Brace Stud  AD/PA-28/91 Amdt 1

Landing Light Seal  AD/PA-28/92 Amdt 1

Flap Handle Attach Bolt  AD/PA-28/93

Engine Oil Cooler Hoses  AD/PA-28/94 Amdt 1

Engine Air Filter  AD/PA-28/95 Amdt 1

Control Wheel Attachment  AD/PA-28/96