Airworthiness Directives 2004 - Revocation and Remaking - Pilatus Britten-Norman BN-2 Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Pilatus Britten-Norman BN-2 Series Aeroplanes

AD Name  AD Number

Pilot and Passenger Seat Cushion Supports - Inspection  AD/BN-2/1 Amdt 1

Fuel Tank Sump - Modification  AD/BN-2/2

Vacuum Hose - Replacement  AD/BN-2/3

Pilots Safety Harness - Installation - CANCELLED  AD/BN-2/4

Rudder Control System - Modification  AD/BN-2/5

Main Fuel Pipe - Modification  AD/BN-2/6

Elevator Trim System - Modification  AD/BN-2/7

Turnbuckles in Aileron, Rudder and Nose Wheel Steering Control Systems -     AD/BN-2/8

Empennage - Inspection and Modification  AD/BN-2/9 Amdt 4

Superseded - CANCELLED  AD/BN-2/10

Elevator Trim Final Drive Lever - Inspection and Modification  AD/BN-2/11 Amdt 1

Wing Attachment Spindles - Inspection  AD/BN-2/12

Rudder Bar Beams - Inspection and Modification  AD/BN-2/13 Amdt 1

Flap Operating Lever - Modification  AD/BN-2/14 Amdt 2

Tail Plane Front Spar Attachment - Inspection  AD/BN-2/15

Carburettor Air Box - Modification  AD/BN-2/16

Elevator Trim Jack - Inspection and Modification  AD/BN-2/17 Amdt 1

Engine Oil Return Pipes - Modification  AD/BN-2/18

Engine Mounting Bracket Jo-Bolts - Inspection and Modification  AD/BN-2/19

Elevator Outboard Hinge Spacers - CANCELLED  AD/BN-2/20

Elevator Trim Lever Box Cracking and Loose Rivets  AD/BN-2/21 Amdt 1

Emergency Exits Placard  AD/BN-2/22

Woodward Propeller Governor Drive Shaft - Inspection and Replacement         AD/BN-2/23 Amdt 1

Flap Attachments and Flap Operating Lever - Inspection  AD/BN-2/24 Amdt 1

Wing Mounted Engine Upper Mounting Brackets  AD/BN-2/25 Amdt 3

Wing Rear Spar - Inspection  AD/BN-2/26

Aileron Mass Balance Attachment - Inspection and Modification  AD/BN-2/27

Flap Drive Pick-Up Bracket  AD/BN-2/28 Amdt 1

Left and Right Rudder Bar Pillar and Slider Tube Assemblies  AD/BN-2/29 Amdt 2

Six Degree Droop Flap Micro-Switch Setting - Inspection  AD/BN-2/30

Engine Mounting Frames - Inspection  AD/BN-2/31 Amdt 1

Pilots Seat Locking Mechanism - Inspection and Modification  AD/BN-2/32

Rudder Hinge Mounting - Inspection and Modification  AD/BN-2/33 Amdt 1

Rudder Bar Lower Mounting - Inspection and Modification  AD/BN-2/34

Airframe Structural Fatigue Life Limitations  AD/BN-2/35 Amdt 2

Engine Mounting Brackets - Inspection  AD/BN-2/36

Passenger Seats - Inspection and Modification  AD/BN-2/37

Flight Compartment Seat Back - Inspection and Modification  AD/BN-2/38

Aileron Mass Balance Tube - Inspection  AD/BN-2/39

Propeller Governors - Inspection and Adjustment - CANCELLED  AD/BN-2/40

Elevator and Flap Control Rods - Inspection  AD/BN-2/41 Amdt 1

Elevator Trim Tab Cracking  AD/BN-2/42 Amdt 3

Engine Controls Attachment Brackets - Modification  AD/BN-2/43

Main Undercarriage Leg - Conversion  AD/BN-2/44

Main Undercarriage Leg  AD/BN-2/45 Amdt 1

Engine Control Shaft - Inspection  AD/BN-2/46

Wing Tip Tank Selector Switches - Modification  AD/BN-2/47

Wing Tip Tank Fuel Contents Transmitter Floats - Inspection  AD/BN-2/48

Pilots Seat Backs - Inspection and Modification  AD/BN-2/49

Tailplane Skin and Structure - Inspection and Rectification  AD/BN-2/50

Main Landing Gear Upper Torque  Link Attachment Lug  AD/BN-2/51 Amdt 3

Elevator Mass Balance Weights  AD/BN-2/52 Amdt 1

Primary Structure Corrosion  AD/BN-2/53 Amdt 2

Pilots Switch Panel  AD/BN-2/54

Nose Wheel Steering Ring Gear - CANCELLED  AD/BN-2/55

Elevator Trim Cable  AD/BN-2/56

Engine Air Intake Hose  AD/BN-2/57 Amdt 2

70 Amp DC Generation System  AD/BN-2/58

Rudder Control Cables  AD/BN-2/59

Generator Inspection  AD/BN-2/60

Main Landing Gear Attachment Bolts  AD/BN-2/61 Amdt 1

Wing Spar Cap  AD/BN-2/62

Nacelle Box Structure at Bottom Fitting of MLG  AD/BN-2/63

Propeller Anti-Ice System  AD/BN-2/64 Amdt 1

NLG Leg Cylinder Bearing Surfaces  AD/BN-2/65

Nose Wheel - Steering Drive-Ring  AD/BN-2/66 Amdt 1

Control Column Sliding Tube  AD/BN-2/67 Amdt 1

Rudder Lower Hinge Doubler  AD/BN-2/68

Throttle Friction Adjuster  AD/BN-2/69 Amdt 1

Elevator Outboard Hinge Bracket  AD/BN-2/70

Main Landing Gear Oleo Attachment Bracket  AD/BN-2/71 Amdt 4

Wing Access Panel  AD/BN-2/72

Emergency Exit Window  AD/BN-2/73

Engine Mounting Brackets  AD/BN-2/74 Amdt 1

Turbine Engine Mounting Frame NB-20-6853  AD/BN-2/75 Amdt 2

Control Column Universal Joint  AD/BN-2/76

Access Panel Bolts  AD/BN-2/77 Amdt 1

Control Rod to Elevator Trim Tab Lever Bolt Retainer  AD/BN-2/78

FHL Landing Gear Units  AD/BN-2/79

Folding Passenger Seat Rear Frame  AD/BN-2/80

Control Cable Swivel Unit Mounting Bracket  AD/BN-2/81

Elevator Final Drive Rod  AD/BN-2/82

Horizontal Stabiliser Attachment Bolts  AD/BN-2/83