Airworthiness Directives 2004 - Revocation and Remaking - Piaggio P166 Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Piaggio P166 Series Aeroplanes

AD Name  AD Number

Teleflex Rods for Engine Controls - Protection  AD/P166/1

Engine Oil System Piping - Re-Routing  AD/P166/2

Fuel System in Engine Compartment - Modification  AD/P166/3

Drain Well for Fuel Tanks - Increased Capacity  AD/P166/4

Engine Nacelle - Drainage Modification  AD/P166/5

Fire Detection System - Modification  AD/P166/6

Electrical Supply - Turn and Bank Indicator, Fire Warning System and Stall     AD/P166/7

Emergency Electrical Bus - Modification  AD/P166/8

Generator Circuit - Modification  AD/P166/9

Undercarriage Warning Horn Circuit - Modification  AD/P166/10

Main Landing Gear Retracting Jack Stem - Installation of Washer  AD/P166/11

Elevator Trim Tab Inner Hinge - Modification  AD/P166/12

Hydraulic Pressure Switch - Provision of Guards  AD/P166/13

Nose Landing Gear Shock Absorber Mount Sleeves - Replacement  AD/P166/14

CANCELLED  AD/P166/15

Elevator Trim Drum - Inspection and Modification  AD/P166/16

Angle Bar at Fuselage Frame 20 - Inspection and Modification  AD/P166/17

Superseded by AD/P166/21 - CANCELLED  AD/P166/18

Carburettor Air Mixer Valve - Inspection and Modification  AD/P166/19

Hydraulic Pressure Gauges - Replacement  AD/P166/20

Main Landing Gear Shock Absorber Strut - Modification  AD/P166/21

Nose Wheel Door Levers - Modification  AD/P166/22

Main Landing Gear Jack Lock - Modification  AD/P166/23

Nose Landing Gear Retraction Jack Brake Valve - Modification  AD/P166/24

Nose Landing Gear Steering Control Flange - Modification  AD/P166/25

Engine and Propeller Installation Teleflex Controls - Modification  AD/P166/26

Magnetic Compass Installation - Modification  AD/P166/27

Flap Control Bellcrank - Modification  AD/P166/28 Amdt 1

Flap Hinge Attachment At Rib No. 13  AD/P166/29

Nose Wheel Steering - Inspection and Modification  AD/P166/30

Main Landing Gear Retraction Jack Pivot - Modification  AD/P166/31

Flap Actuating Cylinder Attachment Bracket - Inspection  AD/P166/32

Engine and Propeller Teleflex Controls - Inspection and Modification               AD/P166/33

Landing Gear Selector Valve - Modification  AD/P166/34

Front Seat Restraint Installations - Modification  AD/P166/35