Airworthiness Directives 2004 - Revocation and Remaking - GAF N22 and N24 Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

GAF N22 and N24 Series Aeroplanes

AD Name  AD Number

CANCELLED  AD/GAF-N22/1

Retirement Lives - Fatigue Critical Components  AD/GAF-N22/2 Amdt 3

CANCELLED  AD/GAF-N22/3

Landing Gear Retraction System - Chain Replacement  AD/GAF-N22/4

Aileron Control System - Chain Replacement  AD/GAF-N22/5

Rudder and Stabiliser Trim Systems - Chain Replacement  AD/GAF-N22/6

Engine Oil Tank Replacement  AD/GAF-N22/7

CANCELLED  AD/GAF-N22/8

Fuel System Check Valves - Modification  AD/GAF-N22/9

Main Landing Gear - Inspection  AD/GAF-N22/10

Relocation of Pilot Seat Installations  AD/GAF-N22/11 Amdt 1

Rudder Control System - Inspection and Modification  AD/GAF-N22/12 Amdt 1

Fuel Crossfeed Selector Knob - Inspection and Replacement  AD/GAF-N22/13 Amdt 1

Engine Air Intake Fairing - Inspection  AD/GAF-N22/14

Engine Air Intake Fairing - Inspection and Rework  AD/GAF-N22/15

Horizontal Stabiliser Rivets - Inspection  AD/GAF-N22/16 Amdt 1

Horizontal Stabiliser Trim Tab System - Inspection and Modification                AD/GAF-N22/17 Amdt 1

Upper Engine Cowl Left Hand Stay - Removal  AD/GAF-N22/18

Rear Baggage Compartment, External Door - Placards  AD/GAF-N22/19

Hot Air Check Valve - Inspection and Modification  AD/GAF-N22/20 Amdt 1

Control Wheel Assembly Retaining Pin - Inspection  AD/GAF-N22/21 Amdt 1

Fuselage - Wing Centre Section Spar Support Bracket Attachment - Inspection AD/GAF-N22/22

Rudder Pedal Guards - Modification  AD/GAF-N22/23

Audio System Modification  AD/GAF-N22/24

Air Intake Anti-Icing Valve - Inspection and Modification  AD/GAF-N22/25

Rudder Tab Mass Balance Hinge Pin - Inspection  AD/GAF-N22/26

Rudder Tab - Modification  AD/GAF-N22/27

Horizontal Stabiliser and Trim Tab System  AD/GAF-N22/28 Amdt 4

Horizontal Stabiliser - Weather Proofing  AD/GAF-N22/29

Horizontal Stabiliser Control System - Inspection for Wind Gust Damage          AD/GAF-N22/30

Control Wheel Gimbal Support Structure Tie Rod Attachment Plates -              AD/GAF-N22/31

Trim Tab Hinge to Horizontal Stabiliser Attachment - Inspection  AD/GAF-N22/32

Rudder Structure and Trim Tab Control Rod - Inspection and Modification       AD/GAF-N22/33

Horizontal Stabiliser Gust Lock - Installation  AD/GAF-N22/34

Horizontal Stabiliser Trim Tab System - Modification  AD/GAF-N22/35

Horizontal Stabiliser - Modification  AD/GAF-N22/36

Rudder Control Torque Shaft Universal Joint - Inspection  AD/GAF-N22/37

Horizontal Stabiliser and Trim Tabs - Modification - CANCELLED                   AD/GAF-N22/38

Horizontal Stabiliser Pivot Bracket Attachment - Inspection and Modification AD/GAF-N22/39 Amdt 1

Fuel Tank Selector and Fuel Shut-Off Cables - Inspection  AD/GAF-N22/40

Emergency Exit Door Lock Mechanism - Inspection  AD/GAF-N22/41

Emergency Exit - External Label  AD/GAF-N22/42

Autopilot Aileron Servo Unit Bridle Cable Assembly P/N 1/N-45-1317 - Inspection     AD/GAF-N22/43 Amdt 1

Rudder Control Lever Shafts  AD/GAF-N22/44 Amdt 2

Revised Compliance Requirements for Embodiment of Nomad Service Bulletins              AD/GAF-N22/45

Control Wheel Assembly - Inspection and Replacement  AD/GAF-N22/46 Amdt 1

Engine Air Intake Modification  AD/GAF-N22/47

Flap and Aileron Control Rod Fork Ends - Inspection  AD/GAF-N22/48

Emergency Exit - Modification  AD/GAF-N22/49

Fin Attachment Fittings  AD/GAF-N22/50 Amdt 2

Rudder Pedal Guard Plate  AD/GAF-N22/51

Stub Wing Upper Front Spar Cap  AD/GAF-N22/52

Taper Pins - Control Systems  AD/GAF-N22/53

D.C. Power - Generator Cable Termination  AD/GAF-N22/54

Rudder Pedal Guard Brush Seals  AD/GAF-N22/55

Rudder Pedal Pivot Arms  AD/GAF-N22/56 Amdt 1

Oxygen - Cabin Supply Pipe  AD/GAF-N22/57

Horizontal Stabiliser  AD/GAF-N22/58 Amdt 5

Engine Ground Running  AD/GAF-N22/59 Amdt 1

Horizontal Stabiliser Pivot Bearings and Brackets  AD/GAF-N22/60

Trim Tab Hinge  AD/GAF-N22/61 Amdt 1

Stub Fin  AD/GAF-N22/62 Amdt 1

Stub Fin Plate P/N 1D/N-12-57  AD/GAF-N22/63 Amdt 1

Aileron Structure  AD/GAF-N22/64

Rear Fuselage Frame  AD/GAF-N22/65 Amdt 3

Stub Fin Ribs  AD/GAF-N22/66 Amdt 2

Flap Components - Retirement Lives  AD/GAF-N22/67

Horizontal Stabiliser - Main Spar and Upper Skin  AD/GAF-N22/68

Ailerons  AD/GAF-N22/69 Amdt 4

Wing Strut Upper End Fitting  AD/GAF-N22/70 Amdt 2

Landing Gear  AD/GAF-N22/71

Upper Fin Rear Attachment Points  AD/GAF-N22/72

Rudder Pedals Brake Push Rod  AD/GAF-N22/73

Left Wing Aft Wing Break Electrical Connector  AD/GAF-N22/74 Amdt 1

Horizontal Stabiliser Access Panel Intercostal Angles and Upper and Lower     AD/GAF-N22/75 Amdt 1