Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron Canada (BHTC) 407 Series Helicopters (Cth)
Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Bell Helicopter Textron Canada (BHTC) 407 Series Helicopters
AD Name AD Number
Never Exceed Speed Reduction AD/BELL 407/1 Amdt 5
Warning Horns AD/BELL 407/2
Thomas Coupling Pack - Cracked Discs - Inspection - CANCELLED AD/BELL 407/3
Gearbox Barrier Tape Replacement - CANCELLED AD/BELL 407/4
Hydraulic Relief Valve Replacement AD/BELL 407/5
Engine to Transmission Driveshaft Replacement AD/BELL 407/6
Tail Rotor Hanger Bearing Support Inspection AD/BELL 407/7
Airworthiness Limitations - CANCELLED AD/BELL 407/8
Tailboom Skin AD/BELL 407/9 Amdt 2
Oil Cooler Blower Assembly - Bearing Change - CANCELLED AD/BELL 407/10
Door Locking Mechanism AD/BELL 407/11
Crew Seat Belt and Restraint Assembly AD/BELL 407/12
Oil Cooler Driveshaft Bearings Check - CANCELLED AD/BELL 407/13
Horizontal Stabiliser Slat AD/BELL 407/14 Amdt 1
Engine to Transmission Shaft AD/BELL 407/15 Amdt 1
Fuel Filler Cap Electrical Bonding AD/BELL 407/16
Forward Bearing Hanger Support AD/BELL 407/17
Fuel Line AD/BELL 407/18
Tail Rotor Gearbox AD/BELL 407/19
Tailboom Tail Rotor Gearbox Support Casting AD/BELL 407/20 Amdt 1
Tail Rotor Drive Shaft Bearings - CANCELLED AD/BELL 407/21 Amdt 2
Rescue Hoist AD/BELL 407/22
Swashplate Drive Link AD/BELL 407/23
Tail Rotor Gearbox AD/BELL 407/24
Tail Rotor Drive Shaft Bearings AD/BELL 407/25 Amdt 1
Landing Gear Cross Tubes AD/BELL 407/26
Power Turbine RPM Steady State Operation Avoidance AD/BELL 407/27
Freewheel Aft Bearing Cap AD/BELL 407/28
0
0
0