Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 212 Series Helicopters (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Bell Helicopter Textron 212 Series Helicopters

AD Name  AD Number

Emergency Exit Decals - CANCELLED  AD/BELL 212/1

Main Rotor Blade - Inspection and Modification  AD/BELL 212/2 Amdt 3

Main Rotor Blades - Eddy Current Inspection  AD/BELL 212/3 Amdt 5

Airworthiness Limitations  AD/BELL 212/4 Amdt 22

CANCELLED  AD/BELL 212/5

Main Rotor Blade - Removal From Service  AD/BELL 212/6

Internal Rescue Hoist Assembly - Modification  AD/BELL 212/7

CANCELLED  AD/BELL 212/8

Stabilizer Bar Outer Tube - Inspection - CANCELLED  AD/BELL 212/9

Main Beam Cap - Inspection and Repair - CANCELLED  AD/BELL 212/10

Fire Detection System - Audible Warning  AD/BELL 212/11

Emergency Exits - Modification and Inspection  AD/BELL 212/12 Amdt 2

Swashplate Support Assembly P/N 204-011-404-9 Replacement - CANCELLED            AD/BELL 212/13

Fuel Boost Pumps - Inspection  AD/BELL 212/14

Main Rotor Hub Fitting Assemblies - Inspection - CANCELLED  AD/BELL 212/15

Cyclic SCAS Stops Installation - Modification  AD/BELL 212/16

CANCELLED  AD/BELL 212/17

Tail Rotor Pitch Horns - Inspection  AD/BELL 212/18

External Cargo Suspension Kit - Load Restriction and Modification                   AD/BELL 212/19 Amdt 1

Emergency Float Bag Deflector - Installation P/N 212-030-629-101 L/H and - AD/BELL 212/20

Main Rotor Hub Inboard Fitting - Life Reduction - CANCELLED  AD/BELL 212/21

Tail Rotor Drive Shaft - Replacement  AD/BELL 212/22

Emergency Float Bag Assemblies - Modification  AD/BELL 212/23

Main Gear Box Spiral Bevel Gear Inspection and Rotor Brake Quill Shaft          AD/BELL 212/24 Amdt 1

Main Rotor Yoke  AD/BELL 212/25 Amdt 4

Hydraulic Servo Cylinder Assembly - Spanner Link Assembly Inspection and    AD/BELL 212/26 Amdt 1

Swashplate Support Assembly - CANCELLED  AD/BELL 212/27 Amdt 1

Vertical Fin Forward Spar  AD/BELL 212/28 Amdt 2

Emergency Flotation Installation Manual Actuation System - Modification and              AD/BELL 212/29

Engine Mount Fireshield - Installation  AD/BELL 212/30

Float Bags - Inspection  AD/BELL 212/31

Elevator to Horn Assembly Attachment - Modification  AD/BELL 212/32

Main Rotor Grip/Blade Bolt - Inspection and Rework  AD/BELL 212/33

Vertical Fin Spar Cap - CANCELLED  AD/BELL 212/34

Tail Rotor Trunnion Bearing Housing  AD/BELL 212/35

Emergency Flotation System and Squib Valve  AD/BELL 212/36 Amdt 1

Main Rotor Pillow Block  AD/BELL 212/37 Amdt 1

Engine Fuel Valve Electrical Connectors P/NO MS3456W14S-5S  AD/BELL 212/38

Engine Fuel Switch  AD/BELL 212/39

Main Transmission Spiral Bevel Gear  AD/BELL 212/40

Pitch Change Link Universal  AD/BELL 212/41

Main Rotor Tension Torsion Straps  AD/BELL 212/42

Bogus Pressure Gauge Emergency Floats P/N 212-073-905- 1  AD/BELL 212/43

Swashplate Outer Ring  AD/BELL 212/44

Tailboom Upper Longeron Splice  AD/BELL 212/45

Main Rotor Drag Brace Assembly  AD/BELL 212/46

Lower Planetary Spider Gear  AD/BELL 212/47

Tension Torsion Straps Retention Pins  AD/BELL 212/48

Tail Rotor Driveshaft Hangar Bearings  AD/BELL 212/49

Swashplate Support  AD/BELL 212/50

Fin To Tail Boom Junction  AD/BELL 212/51

Main Driveshaft and Tail Rotor Drive Over-Temperature Indicators                 AD/BELL 212/52

Main Rotor Yoke  AD/BELL 212/53

Main Transmission Lower Planetary Spider  AD/BELL 212/54

Main Rotor - Pillow Block Attachment Bolts  AD/BELL 212/55 Amdt 1

Tailboom Doubler  AD/BELL 212/56

Hydraulic Servo Actuator Shoulder Bolt  AD/BELL 212/57

Fuel Line Replacement  AD/BELL 212/58

Tail Rotor Yoke  AD/BELL 212/59

This AD yet to be Issued  AD/BELL 212/60

Main Hydraulic Servo Actuator Rod End Lock Washer  AD/BELL 212/61

Tail Rotor Counterweight Bellcrank Retention Nut  AD/BELL 212/62

Tail Rotor Blade Fwd Tip Weight Retention Block and Aft Tip Closure            AD/BELL 212/63

Vertical Fin Spar  AD/BELL 212/64

Main Rotor Tension-Torsion Straps - 2  AD/BELL 212/65

Main Rotor Grip   AD/BELL 212/66