Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 205 Series Helicopters (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Bell Helicopter Textron 205 Series Helicopters

AD Name  AD Number

Airworthiness Limitations  AD/BELL 205/1 Amdt 32

Tail Rotor Yoke - Inspection  AD/BELL 205/2

Main Rotor Blade - Modification  AD/BELL 205/3

Superseded by AD/BELL 205/1W - CANCELLED  AD/BELL 205/4

Superseded by AD/BELL 205/1W - CANCELLED  AD/BELL 205/5

Cyclic Control Supports - Inspection  AD/BELL 205/6

Tail Rotor Blade Grip - Inspection  AD/BELL 205/7

Superseded by AD/BELL 205/46 - CANCELLED  AD/BELL 205/8

Servo Cylinder Upper Control Tube Fittings  AD/BELL 205/9

205A/A1 Tail Boom Vertical Fin Forward - Inspection and Modification          AD/BELL 205/10

Superseded by DCA/BELL 205/1 Amdt4 - CANCELLED  AD/BELL 205/11 Amdt 1

Superseded by AD/BELL 205/46 - CANCELLED  AD/BELL 205/12 Amdt 2

Float Installation - Inspection and Modification  AD/BELL 205/13 Amdt 1

Superseded by DCA/BELL 205/25 Amdt1 - CANCELLED  AD/BELL 205/14

Tail Rotor Hub Assembly - Inspection  AD/BELL 205/15

Fire Detection System - Audible Warning  AD/BELL 205/16

Hydraulic Fluid Temperature Indicators - Installation  AD/BELL 205/17

CANCELLED  AD/BELL 205/18 Amdt 1

Transmission Support Case - Inspection  AD/BELL 205/19 Amdt 1

CANCELLED  AD/BELL 205/20 Amdt 2

Swashplate Scissors Lever Bolts - Inspection  AD/BELL 205/21

Transmission Oil System - Inspection  AD/BELL 205/22

Main Rotor Blades  AD/BELL 205/23 Amdt 4

CANCELLED  AD/BELL 205/24

CANCELLED  AD/BELL 205/25 Amdt 3

Fire Extinguisher Cartridges - Inspection  AD/BELL 205/26

CANCELLED  AD/BELL 205/27

Main Rotor Blade - Removal From Service  AD/BELL 205/28

Main Rotor Blade Bolt Washer - Inspection  AD/BELL 205/29

Stabilizer Bar Outer Tube - Inspection - CANCELLED  AD/BELL 205/30

Tail Boom Attachment Fitting and Longerons - Inspection  AD/BELL 205/31 Amdt 1

Main Beam Cap - Inspection and Repair  AD/BELL 205/32

Synchronised Elevator - Inspection, Modification and Retirement  AD/BELL 205/33

Emergency Exits - Modification and Inspection  AD/BELL 205/34 Amdt 2

Swashplate Support Assembly - Retirement Life  AD/BELL 205/35 Amdt 1

Fuel Boost Pumps - Inspection  AD/BELL 205/36

Main Rotor Hub Fitting Assemblies - Inspection  AD/BELL 205/37

CANCELLED  AD/BELL 205/38

CANCELLED  AD/BELL 205/39

Tail Rotor Pitch Horns - Inspection  AD/BELL 205/40

External Cargo Suspension Kit - Load Restriction and Modification                   AD/BELL 205/41 Amdt 1

Main Rotor Hub Inboard Fitting - Life Reduction  AD/BELL 205/42

Engine Air Inlet Screen - Inspection  AD/BELL 205/43

Cyclic Control Cylinder Assembly - Inspection of Piston Rods  AD/BELL 205/44

Main Rotor Yoke  AD/BELL 205/45 Amdt 4

Anti-Torque Control System - Modification to Pushrod Status  AD/BELL 205/46

Hydraulic Servo Cylinder Assembly - Spanner Link Assembly Inspection and    AD/BELL 205/47

Fuselage Main Beams Splice - Modification  AD/BELL 205/48

Elevator to Horn Assembly Attachment - Modification  AD/BELL 205/49

Main Rotor Grip/Blade Bolt - Inspection and Rework  AD/BELL 205/50

Vertical Fin Spar Cap  AD/BELL 205/51 Amdt 1

Tail Rotor Trunnion Bearing Housing  AD/BELL 205/52

Main Rotor Pillow Block  AD/BELL 205/53

Main Transmission Spiral Bevel Gear  AD/BELL 205/54

Pitch Change Link Universal  AD/BELL 205/55

Tail Rotor Hub P/N 204-011-801-121  AD/BELL 205/56

Bogus Tension Torsion Straps  AD/BELL 205/57

Time Expired Tail Rotor Yoke  AD/BELL 205/58

Swashplate Outer Ring  AD/BELL 205/59

Tail Rotor Driveshaft Hangar Bearings  AD/BELL 205/60

Main Transmission Lower Planetary Spider  AD/BELL 205/61

42 Degree Tail Rotor Drive Gearbox  AD/BELL 205/62

Tail Rotor Yoke  AD/BELL 205/63

This AD yet to be issued  AD/BELL 205/64

Vertical Fin Spar Cap  AD/BELL 205/65

Main Rotor - Pillow Block Attachment Bolts  AD/BELL 205/66

Main Hydraulic Servo Actuator Rod End Lock Washer  AD/BELL 205/67

Tail Rotor Counterweight Bellcrank  Retention Nut  AD/BELL 205/68

Tail Rotor Grip  AD/BELL 205/69

Tail Rotor Blade Fwd Tip Weight Retention Block and Aft Tip Closure            AD/BELL 205/70

Main Rotor Tension-Torsion Strap  AD/BELL 205/71

Main Rotor Grip  AD/BELL 205/72