Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 204 Series Helicopters (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Bell Helicopter Textron 204 Series Helicopters

AD Name  AD Number

Tail Rotor Hub - Modification - CANCELLED  AD/BELL 204/1

Scissors Assembly - Modification - CANCELLED  AD/BELL 204/2

Baggage Compartment Door - Modification - CANCELLED  AD/BELL 204/3

Tail Rotor Assembly Inspection  AD/BELL 204/4 Amdt 1

Tail Rotor Pitch Control Slider  AD/BELL 204/5 Amdt 1

Fatigue Critical Components Retirement Lives  AD/BELL 204/6 Amdt 12

Tail Rotor Yoke - Inspection  AD/BELL 204/7

Main Rotor Blade - Modification  AD/BELL 204/8

Superseded by DCA/BELL 204/6 Amdt3  AD/BELL 204/9

Tail Rotor Blade Grip  AD/BELL 204/10 Amdt 1

Servo Cylinder Upper Control Tube Fittings - Inspections  AD/BELL 204/11

Superseded by DCA/BELL 204/6 Amdt5  AD/BELL 204/12 Amdt 1

Tail Rotor Pitch Change Chain  AD/BELL 204/13 Amdt 2

Main Rotor Blades - Inspection - CANCELLED  AD/BELL 204/14

Fire Detection System - Audible Warning  AD/BELL 204/15

Transmission Support Case - Inspection  AD/BELL 204/16 Amdt 1

CANCELLED  AD/BELL 204/17 Amdt 2

Swashplate Scissors Lever Bolts  AD/BELL 204/18

Main Rotor Blade Cracking and Corrosion  AD/BELL 204/19 Amdt 3

Emergency Exits - Modification and Inspection  AD/BELL 204/20 Amdt 1

Main Rotor Blades - Inspection  AD/BELL 204/21

Main Rotor Blades Removal From Service  AD/BELL 204/22 Amdt 1

Main Rotor Blade Bolt Washer - Inspection - CANCELLED  AD/BELL 204/23

Stabiliser Bar Outer Tube - Inspection - CANCELLED  AD/BELL 204/24

Swashplate Support Assembly  P/N 204-011-404-9 - Replacement  AD/BELL 204/25

Main Rotor Hub Fitting Assemblies - Inspection - CANCELLED  AD/BELL 204/26

External Cargo Suspension Kit - Load Restriction and Modification                   AD/BELL 204/27 Amdt 1

Float Kit and Cross Tubes  AD/BELL 204/28

Emergency Exit Latch Pin  AD/BELL 204/29

External Load, Load Cell Link  AD/BELL 204/30

Main Rotor Yoke  AD/BELL 204/31

Tail Rotor Grip  AD/BELL 204/32

Main Transmission Spiral Bevel Gear  AD/BELL 204/33

Tail Rotor Hub  AD/BELL 204/34

Tail Rotor Gearbox Duplex Bearings  AD/BELL 204/35

Tail Rotor Grips  AD/BELL 204/36

Swashplate Support Assembly  AD/BELL 204/37

Tail Rotor Driveshaft Hangar Bearings  AD/BELL 204/38

Pillow Block Bolts and Hardware  AD/BELL 204/39

Main Gearbox - Planetary Spider  AD/BELL 204/40

Tail Rotor Blades  AD/BELL 204/41

42 degree Gearbox  AD/BELL 204/42

Tailboom Vertical Fin Spar  AD/BELL 204/43

Main Rotor Mast  AD/BELL 204/44 Amdt 1