Airworthiness Directives 2004 - Revocation and Remaking - Beechcraft 400 Series Aeroplanes (Cth)
Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Beechcraft 400 Series Aeroplanes
AD Name AD Number
Aft Fuel Tank Vent AD/BEECH 400/1
MLG Door Uplock Links AD/BEECH 400/2
Electrical Wiring - Left-Hand Interstage Turbine Temperature Circuit Breaker AD/BEECH 400/3
Fuselage Rivets AD/BEECH 400/4
Main Circuit Breaker Panel AD/BEECH 400/5
Escape Hatch Substructure Rivets AD/BEECH 400/6
Wheel Speed Transducer Drive Clip AD/BEECH 400/7
Main Wheel Well Wiring Harness AD/BEECH 400/8
Flap Roller Retention AD/BEECH 400/9 Amdt 1
Cabin Seat Frames AD/BEECH 400/10
Autopilot and Rudder Boost Interlock AD/BEECH 400/11
Standby Instrument Lighting Control AD/BEECH 400/12
Spoiler Control Push Rod AD/BEECH 400/13
Flightcrew Seats AD/BEECH 400/14
Outflow/Safety Valve AD/BEECH 400/15
Aft Fuselage Fuel Drain Tube Assembly AD/BEECH 400/16
Engine Fire Extinguisher Squib Wiring AD/BEECH 400/17
Wing Temperature Thermal Switch AD/BEECH 400/18
Parking Brake Hydraulic Line AD/BEECH 400/19
Bleed Air Supply Tube Assembly AD/BEECH 400/20
Battery and External Power Ground AD/BEECH 400/21
Loss of Airspeed Indication AD/BEECH 400/22
Engine Mount AD/BEECH 400/23
Low Pressure Oxygen Tubing AD/BEECH 400/24
Roll Trim Printed Circuit Board Assembly AD/BEECH 400/25
Spoiler Mixer Bay Drain Holes AD/BEECH 400/26
0
0
0