Airworthiness Directives 2004 - Revocation and Remaking - Airparts (NZ) Ltd. Fu 24 Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Airparts (NZ) Ltd. FU 24 Series Aeroplanes

AD Name  AD Number

Elevator Control Cables and Pulleys - Inspection  AD/FU24/1 Amdt 2

Structural Component - Corrosion - Inspection  AD/FU24/2 Amdt 1

CANCELLED  AD/FU24/3

Elevator Balance Horn Attachment - Modification - CANCELLED                   AD/FU24/4

Elevator Trim Tab Brackets - Modification  AD/FU24/5

Elevator Lower Pulley Station 337 - 340 - Modification - CANCELLED          AD/FU24/6

Wing Spar - Inspection - CANCELLED  AD/FU24/7 Amdt 2

Aileron Rib Assembly - Modification - CANCELLED  AD/FU24/8

Auxiliary Fuel Pump Switch - Modification - CANCELLED  AD/FU24/9

Fuel Sump Corrosion - Inspection  AD/FU24/10

Fin Rib and Skin Cracking - Inspection  AD/FU24/11

Rudder Lowr Rib - Inspection  AD/FU24/12

Fuel Tank Vent System - Modification - CANCELLED  AD/FU24/13

Hopper and Spray Tank Installation - Modification  AD/FU24/14

Main Landing Gear Axle Socket - Inspection  AD/FU24/15

Rudder Top Hinge Rivnuts - Modification - CANCELLED  AD/FU24/16

Aileron Mass Balance Arms - Modification  AD/FU24/17

Fuselage Skin Panels - Inspection - CANCELLED  AD/FU24/18

Engine Mounts and Firewalls  AD/FU24/19

CANCELLED  AD/FU24/20

CANCELLED  AD/FU24/21

CANCELLED  AD/FU24/22

CANCELLED  AD/FU24/23

CANCELLED  AD/FU24/24

CANCELLED  AD/FU24/25

CANCELLED  AD/FU24/26

CANCELLED  AD/FU24/27

CANCELLED  AD/FU24/28

CANCELLED  AD/FU24/29

CANCELLED  AD/FU24/30

Elevator Hinge and Attachment Fittings  AD/FU24/31 Amdt 1

CANCELLED  AD/FU24/32

CANCELLED  AD/FU24/33

CANCELLED  AD/FU24/34

CANCELLED  AD/FU24/35

Fuselage Structure - Modification  AD/FU24/36

Elevator Horn Assembly - Inspection  AD/FU24/37

Main Landing Gear Lower Torque Link - Modification  AD/FU24/38

Cleveland Wheel and Brake Assembly - Inspection  AD/FU24/39

Cockpit Ventilators - Modification  AD/FU24/40

Pilot Restraint Installation - Modification  AD/FU24/41

Installation of No Step Placard  AD/FU24/42

Installation of Crash Axes  AD/FU24/43

Part 1. Wing Spar Modification, and Part 2. Wing Spar Inspection  AD/FU24/44

Fuel Quantity Indication - Modification  AD/FU24/45

Brake Torque Plates - Inspection and Modification  AD/FU24/46

Cockpit Bulkhead - Modification  AD/FU24/47

Tailplane Mass Balance Weight and Control Horn - Inspection and Modification            AD/FU24/48

Centre Wing, Outboard Rear Fitting - Inspection and Modification  AD/FU24/49

Control Column Grip - Inspection  AD/FU24/50

Fin Forward Attachment Fitting  AD/FU24/51 Amdt 2

Fuel Line - Modification  AD/FU24/52

Flap Control Torque Tube - Inspection  AD/FU24/53 Amdt 1

L.H. Rudder Pedal - Inspection  AD/FU24/54

Oil Pressure Gauge Line - Fitment of Restrictor  AD/FU24/55

Engine Controls - Inspection and Modification  AD/FU24/56

Shoulder Harness Inertia Reel Installation Tension Clip P/N 08-16037-3 -        AD/FU24/57

Wing Structural Fatigue Limitation  AD/FU24/58 Amdt 1

Rudder Torque Tube to Rudder Attachment - Inspection  AD/FU24/59

Engine Control Cables - Life Limitations - CANCELLED  AD/FU24/60 Amdt 2

Main Landing Gear Torque Link Brackets - Inspection/Replacement                 AD/FU24/61

Forward Fin Structure  AD/FU24/62

Main Spar Web  AD/FU24/63