Airworthiness Directives 2004 - Revocation and Remaking - Aerospatiale Rallye Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)       revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)       make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1             Revocation and Remaking of

Airworthiness Directives

Aerospatiale Rallye Series Aeroplanes

AD Name  AD Number

Stop Washer, Aileron Front Pivot - Installation  AD/MSR/1

Tab Control Pinion on Shaft - Modification  AD/MSR/2

Spot Welding of Skin to Rear Fuselage Frame - Inspection  AD/MSR/3

L/H Fuel Supply Hose - Replacement Fuel Gauge Vent - Modification                AD/MSR/4

Horizontal Stabiliser Front Attachment Brackets - Inspection and Modification             AD/MSR/5 Amdt 1

Leading Edge Slats - CANCELLED  AD/MSR/6

Fuel Pressure Gauge Line - CANCELLED  AD/MSR/7

Engine Cooling - Modification  AD/MSR/8

Fuel System - Fuel Gauge Ball - Replacement  AD/MSR/9

Firewall Sealing - Modification  AD/MSR/10

Flexible Hoses in Engine Compartment - Installation  AD/MSR/11 Amdt 1

Elevator Control Rod - Inspection  AD/MSR/12

Carburettor Heat Butterfly - CANCELLED  AD/MSR/13

Carburettor Heat Butterfly - CANCELLED  AD/MSR/14

Elevator Bell Crank - Replacement  AD/MSR/15 Amdt 1

Firewall Engine Mount Attachment Fittings - Inspection  AD/MSR/16

Central Front Horizontal Stabiliser Attachment Bracket - Inspection and          AD/MSR/17

Engine Mount  AD/MSR/18 Amdt 2

Front Seat Restraint Installation - Modification  AD/MSR/19

Engine Cowling Attachment Locks - Modification  AD/MSR/20

Front Seat Support Beam Protection - Installation  AD/MSR/21

Rear Fuselage Structure - Inspection  AD/MSR/22

Wing Attachment Fittings - Inspection  AD/MSR/23

Wing Flap System - Inspection  AD/MSR/24

Carburettor Heat Valve - Modification  AD/MSR/25

Wing Structural Fatigue Life Limitation  AD/MSR/26

Corrosion - Inspection  AD/MSR/27 Amdt 1

Horizontal Stabilizer Spar and Attachment Fittings  AD/MSR/28 Amdt 1

Engine Mount  AD/MSR/29

Nose Landing Gear Attachment Fitting  AD/MSR/30 Amdt 1

Nose Landing Gear - Yoke Pivot Assembly  AD/MSR/31

Nose Landing Gear - Wheel Axle  AD/MSR/32