AD/Cessna 210/34 Ammeter Type and Position Inspection and Modification Cancelled (Cth)

AIRWORTHINESS DIRECTIVE

On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive AD/CESSNA 210/34.

Cessna 210 Series Aeroplanes

AD/CESSNA 210/34 Ammeter Type and Position - Inspection and Modification 4/2008

Requirement:	CANCELLED.
This AD is cancelled on 10 April 2008.
Background:	This unique Australian AD, issued in 1978, required an inspection to ascertain if the ammeter has been modified as per Rex Drawing RA-A-1109 or if a centre zero ammeter (charge/discharge type) was connected to the alternator line.  If so, the AD then required reconnection of the centre zero ammeter into the battery line as per the original Cessna wiring diagrams.  As compliance was required within 100 hours time in service after 30 September 1978, affected aircraft would have complied with these requirements and the unsafe condition no longer exists.

David Punshon
Delegate of the Civil Aviation Safety Authority

13 February 2008