Vehicle Standard (Australian Design Rule 84/00 – Front Underrun Impact Protection) 2009 Amendment 1

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2017L01516 Not in force Legislative Instrument

Legislation content

 

 

 

Vehicle Standard (Australian Design Rule 84/00 – Front Underrun Impact Protection) 2009 Amendment 1

Made under section 7 of the Motor Vehicle Standards Act 1989

Replacement Explanatory Statement

 

Issued by the authority of the Minister for Urban Infrastructure and Cities

February 2018

Contents

 

1. Legislative context

2. content and effect of ADR 84/00 AND THE AMENDMENT

2.1. Overview of the ADR

2.2. Effect of the ADR Amendment

2.3. Incorporated Documents

3. best practice regulation

3.1. Business Cost Calculator

3.2. General Consultation Arrangements

3.3. Specific Consultation Arrangements for this Vehicle Standard

3.4. Regulation Impact Statement

4. STATEMENT OF COMPATIBILITY WITH HUMAN RIGHTS

4.1. Overview of the Legislative Instrument

4.2. Human Rights Implications

4.3. Conclusion


1.                       Legislative context

Vehicle Standard (Australian Design Rule 84/00 – Front Underrun Impact Protection) 2009 Amendment 1 is made under the Motor Vehicle Standards Act 1989 (the Act). The Act enables the Australian Government to establish nationally uniform standards that apply to new road vehicles when they are first supplied to the market in Australia. The Act applies to such vehicles whether they are manufactured in Australia or imported.

The making of the vehicle standards necessary for the Act's effective operation is provided for in section 7 which empowers the Minister to "determine vehicle standards for road vehicles or vehicle components".

Vehicle Standard (Australian Design Rule 84/00 – Front Underrun Impact Protection) 2009 was originally determined in 2009.

2.                       content and effect of ADR 84/00 AND THE AMENDMENT

2.1.                 Overview of the ADR

The function of Australian Design Rule (ADR) 84/00 – Front Underrun Impact Protection is to specify the design, construction and performance requirements of underrun protection devices fitted additionally or incorporated into the design of rigid and articulated heavy goods vehicles. The requirements are that the front structures of these vehicles are designed in such a way that, in the event of a frontal collision with a light vehicle, they enable the occupant protection measures of the light vehicle to be fully engaged.

 

These requirements cover all new heavy goods vehicles (NC Category) manufactured on or after 1 January 2011 and all heavy goods vehicles (NC Category) after 1 January 2012.

2.2.                 Effect of the ADR Amendment

This amendment removes ambiguity and reduces stringency by removing the requirement for manufactures of Front Underrun Protection Devices (FUPDs) to comply with the requirements of structurally integrated Front Underrun Protection (FUP).

2.3.                 Incorporated Documents

This amendment does not introduce additional references to the documents already incorporated in the ADRs.

The amended Clause 7 continues to incorporate a reference to United Nations (UN) Regulation No. 93 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF:

I. FRONT UNDERRUN PROTECTIVE DEVICES (FUPDs)

II. VEHICLES WITH REGARD TO THE INSTALLATION OF AN FUPD OF AN APPROVED TYPE

III. VEHICLES WITH REGARD TO THEIR FRONT UNDERRUN PROTECTION (FUP)

Applicable sections of UN Regulation No. 93 in turn reference UN Regulation No. 31 and ISO 612:1978.

While these standards are highly technical in nature and typically accessed by manufacturers and test facilities as part of their professional library, the UN regulations are accessible free of charge via the UN World Forum for the Harmonization of Vehicle Regulations (WP.29) website at https://www.unece.org/trans/main/welcwp29.html. ISO standards are available for purchase at https://www.iso.org/store.html.

In accordance with subsections 14(1)(b) and 14(2) of the Legislation Act 2003 these standards are incorporated as in force at the commencement of the Determination.

3.                       best practice regulation

3.1.                 Business Cost Calculator

This amendment removes the cost imposed on FUPD manufacturers in interpretation and complying with paragraph 6.4 of ADR 84/00. It is estimated that the cost benefit to the industry will be approximately $250,000 annually.

3.2.                 General Consultation Arrangements

It has been longstanding practice to consult widely on proposed new or amended vehicle standards.  For many years there has been active collaboration between the Australian Government and the state/territory governments, as well as consultation with industry and consumer groups.  Much of the consultation takes place within institutional arrangements established for this purpose.  The analysis and documentation prepared in a particular case, and the bodies consulted, depend on the degree of impact the new or amended standard is expected to have on industry or road users.

Depending on the nature of the proposed changes, consultation could involve the Technical Liaison Group (TLG) and the Australian Motor Vehicle Certification Board (AMVCB), the Strategic Vehicle Safety and Environment Group (SVSEG) and the Austroads Safe Vehicles Theme Group (SVTG), the Transport and Infrastructure Senior Officials’ Committee (TISOC) and the Transport and Infrastructure Council (the Council).

  • TLG consists of technical representatives of government (Australian and state/territory), the manufacturing and operational arms of the industry (including organisations such as the Federal Chamber of Automotive Industries and the Australian Trucking Association) and of representative organisations of consumers and road users (particularly through the Australian Automobile Association). AMVCB consists of the government members of TLG.
  • SVSEG consists of senior representatives of government (Australian and state/territory), the manufacturing and operational arms of the industry and of representative organisations of consumers and road users (at a higher level within each organisation as represented in TLG). SVTG consists of the government members of SVSEG.
  • TISOC consists of state and territory transport and/or infrastructure Chief Executive Officers (CEOs) (or equivalents), the CEO of the National Transport Commission, New Zealand and the Australian Local Government Association.
  • The Council consists of the Australian, state/territory and New Zealand Ministers with responsibility for transport and infrastructure issues.

Editorial changes and changes to correct errors are processed by the Department of Infrastructure, Regional Development and Cities. This approach is only used where the amendments do not vary the intent of the vehicle standard.

Proposals that are regarded as significant need to be supported by a Regulation Impact Statement (RIS) meeting the requirements of the Office of Best Practice Regulation (OBPR) as published in the Australian Government Guide to Regulation and the Council of Australian Government’s Best Practice Regulation: A Guide for Ministerial Councils and Standard-Setting Bodies.

3.3.                 Specific Consultation Arrangements for this Vehicle Standard

This amendment was requested by the Australian Trucking Association (ATA) at AMVCB meeting 221 and TLG meeting 41 in 2015. Following full review and consideration of technical issues and consultations, the proposals was agreed in January 2017.

As the amendment is to provide exemption to the stringency of ADR 84/00 paragraph 6.4, there is no need for further consultation through TISOC, the Council or the public comment process.

3.4.                 Regulation Impact Statement

As the proposed amendment does not increase the stringency of the ADR, a RIS is not required.

Since the decision is made by the Minister for Urban Infrastructure and Cities without reference to the Council and the proposal is not considered significant, OBPR requirements have been met for this regulatory proposal (OBPR Reference ID 21984).

4.                       STATEMENT OF COMPATIBILITY WITH HUMAN RIGHTS

The following Statement is prepared in accordance with Part 3 of the Human Rights (Parliamentary Scrutiny) Act 2011.

4.1.                 Overview of the Legislative Instrument

This amendment to ADR 84/00 removes ambiguity and reduces stringency by removing the requirement for manufactures of FUPDs to comply with the requirements of structurally integrated FUP. It does not affect the original intent or operation of the standard.

4.2.                 Human Rights Implications

This amendment to ADR 84/00 does not engage any of the human rights and freedoms recognised or declared in the international instruments listed in section 3 of the Human Rights (Parliamentary Scrutiny) Act 2011.

4.3.                 Conclusion

This amendment to ADR 84/00 is compatible with human rights as it does not raise any human rights issues.

Overview

The Vehicle Standard (Australian Design Rule 84/00 – Front Underrun Impact Protection) 2009 Amendment 1 was enacted in 2018 to address ambiguity and reduce the stringency of certain requirements for front underrun protection devices in heavy goods vehicles. This amendment was made under the Motor Vehicle Standards Act 1989, which allows the Australian Government to establish uniform standards for road vehicles and vehicle components supplied in Australia, regardless of whether they are manufactured domestically or imported. The amendment removes the requirement for manufacturers of front underrun protection devices to comply with the standards for structurally integrated front underrun protection, thereby clarifying the regulations and easing compliance for manufacturers. The policy objective of this amendment aligns with best practice regulation by reducing unnecessary costs and complexities for industry, estimated to benefit the industry by approximately $250,000 annually, without compromising the original intent of the standard. This legislative change was developed through extensive consultation with relevant industry stakeholders, including the Australian Trucking Association, and was deemed not significant enough to require a Regulation Impact Statement.

Scope and Application

The Vehicle Standard (Australian Design Rule 84/00 – Front Underrun Impact Protection) 2009 Amendment 1 is a legislative instrument made under the Motor Vehicle Standards Act 1989, which aims to establish nationally uniform standards for new road vehicles supplied in Australia, whether manufactured domestically or imported. This amendment specifically pertains to the design, construction, and performance requirements of underrun protection devices fitted to rigid and articulated heavy goods vehicles. These requirements ensure that the front structures of such vehicles are designed to enable the occupant protection measures of light vehicles to be fully engaged in the event of a frontal collision. The amendment applies to all new heavy goods vehicles (NC Category) manufactured on or after 1 January 2011 and all heavy goods vehicles (NC Category) after 1 January 2012. It removes ambiguity and reduces stringency by eliminating the requirement for manufacturers of Front Underrun Protection Devices (FUPDs) to comply with the requirements of structurally integrated Front Underrun Protection (FUP). The amendment incorporates references to United Nations Regulation No. 93, which, in turn, references UN Regulation No. 31 and ISO 612:1978. The amendment does not introduce additional references to the documents already incorporated in the Australian Design Rules (ADRs) and is compatible with human rights, as it does not raise any human rights issues.

Key Provisions

The Vehicle Standard (Australian Design Rule 84/00 – Front Underrun Impact Protection) 2009 Amendment 1 (the Amendment) introduces changes to the existing Australian Design Rule (ADR) 84/00, which specifies the design, construction, and performance requirements for underrun protection devices on heavy goods vehicles. The main purpose of ADR 84/00 is to ensure that in the event of a frontal collision with a lighter vehicle, the occupant protection measures of the lighter vehicle are fully engaged (section 2.1). This applies to all new heavy goods vehicles (NC Category) manufactured on or after 1 January 2011 and all heavy goods vehicles (NC Category) after 1 January 2012. The Amendment removes the requirement for manufacturers of Front Underrun Protection Devices (FUPDs) to comply with the requirements of structurally integrated Front Underrun Protection (FUP), thus reducing ambiguity and stringency (section 2.2). The amendment continues to incorporate references to the United Nations (UN) Regulation No. 93 and other relevant standards, which are accessible online (section 2.3). Under the Amendment, manufacturers of FUPDs are no longer required to adhere to the stringent standards of structurally integrated FUP, which was a source of ambiguity and potential business costs. This change is expected to benefit the industry by an estimated $250,000 annually in reduced compliance costs (section 3.1). The Amendment follows the longstanding practice of extensive consultation with various stakeholders, including government bodies, industry representatives, and consumer groups, though in this specific case, additional consultation beyond what was already conducted was not deemed necessary (sections 3.2 and 3.3). Given that the Amendment does not increase the stringency of the ADR, a Regulation Impact Statement was not required (section 3.4). The Amendment does not introduce any new offences or penalties. However, failure to comply with the requirements of ADR 84/00, as amended, could potentially lead to regulatory actions under the Motor Vehicle Standards Act 1989. Penalties for non-compliance with vehicle standards can include fines and other enforcement actions as prescribed by the Act. The Amendment explicitly states that it does not engage any of the human rights and freedoms recognised in the Human Rights (Parliamentary Scrutiny) Act 2011, thereby affirming its compatibility with human rights (sections 4.2 and 4.3).

Legal classification tags

Area of Law
Commercial Law
Instrument
Regulation
Concepts
Definitions & Interpretation
Compliance Obligations
Consultation Requirements

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.