Vehicle Standard (Australian Design Rule 3/03 – Seats and Seat Anchorages) 2006 Amendment 2
Made under section 7 of the Motor Vehicle Standards Act 1989
Explanatory Statement
Issued by the authority of the Minister for Urban Infrastructure
September 2017
CONTENTS
1. LEGISLATIVE CONTEXT
2. CONTENT AND EFFECT OF ADR 3/03 AND THE AMENDMENT
2.1. Overview of the ADR
2.2. Effect of the Amendment
3. BEST PRACTICE REGULATION
3.1. Benefits and Costs
3.2. General Consultation Arrangements
3.3. Specific Consultation Arrangements for this Vehicle Standard
4. STATEMENT OF COMPATIBILITY WITH HUMAN RIGHTS
4.1. Overview of the Legislative Instrument
4.2. Human Rights Implications
4.3. Conclusion
- LEGISLATIVE CONTEXT
Vehicle Standard (Australian Design Rule 3/03 – Seats and Seat Anchorages) 2006 Amendment 2 is made under the Motor Vehicle Standards Act 1989 (the Act). The Act enables the Australian Government to establish nationally uniform standards that apply to new road vehicles when they are first supplied to the market in Australia. The Act applies to such vehicles whether they are manufactured in Australia or imported.
The making of the vehicle standards necessary for the Act's effective operation is provided for in section 7 which empowers the Minister to "determine vehicle standards for road vehicles or vehicle components".
Vehicle Standard (Australian Design Rule 3/03 – Seats and Seat Anchorages) 2006 (ADR 3/03) was originally determined in 2006 and has been amended once before.
2. CONTENT AND EFFECT OF ADR 3/03 AND THE AMENDMENT
2.1. Overview of the ADR
The function of ADR 3/03 is to specify requirements for seats, their attachment assemblies, their installation and any head restraint fitted, to minimise the possibility of occupant injury due to forces acting on the seat as a result of vehicle impact.
2.2. Effect of the Amendment
This amendment implements transition arrangements from this vehicle standard to a later vehicle standard. Under these arrangements, compliance to the new standard ADR 3/04 exempts a manufacturer from having to comply with ADR 3/03.
This change does not affect the original intent of the standard but is essential to allow its correct operation in conjunction with ADR 3/04.
3. BEST PRACTICE REGULATION
3.1. Benefits and Costs
There is no expected increase in cost to manufacturers, as the proposed amendments do not affect the requirements of the ADR.
3.2. General Consultation Arrangements
It has been longstanding practice to consult widely on proposed new or amended vehicle standards. For many years there has been active collaboration between the Commonwealth and the state/territory governments, as well as consultation with industry and consumer groups. Much of the consultation takes place within institutional arrangements established for this purpose. The analysis and documentation prepared in a particular case, and the bodies consulted, depend on the degree of impact the new or amended standard is expected to have on industry or road users.
Depending on the nature of the proposed changes, consultation could involve the Technical Liaison Group (TLG), Strategic Vehicle Safety and Environment Group (SVSEG), Transport and Infrastructure Senior Officials’ Committee (TISOC) and the Transport and Infrastructure Council (the Council).
- TLG consists of technical representatives of government (Australian and state/territory), the manufacturing and operational arms of the industry (including organisations such as the Federal Chamber of Automotive Industries and the Australian Trucking Association) and of representative organisations of consumers and road users (particularly through the Australian Automobile Association).
- SVSEG consists of senior representatives of government (Australian and state/territory), the manufacturing and operational arms of the industry and of representative organisations of consumers and road users (at a higher level within each organisation as represented in TLG).
- TISOC consists of state and territory transport and/or infrastructure Chief Executive Officers (CEOs) (or equivalents), the CEO of the National Transport Commission, New Zealand and the Australian Local Government Association.
- The Council consists of the Australian, state/territory and New Zealand Ministers with responsibility for transport and infrastructure issues.
Editorial changes and changes to correct errors are processed by the Department of Infrastructure and Regional Development. This approach is only used where the amendments do not vary the intent of the vehicle standard.
Proposals that are regarded as significant need to be supported by a RIS meeting the requirements of the Office of Best Practice Regulation (OBPR) as published in the Australian Government Guide to Regulation and the Council of Australian Governments’ Best Practice Regulation: A Guide for Ministerial Councils and National Standard Setting Bodies.
3.3. Specific Consultation Arrangements for this Vehicle Standard
This amendment is related to the introduction of ADR 3/04. As it is minor in nature, and does not affect the requirements of the ADR, further consultation was not considered necessary and so not carried out.
As the amendment is purely administrative in nature and does not increase the stringency of the ADR, a RIS is not required.
4. STATEMENT OF COMPATIBILITY WITH HUMAN RIGHTS
The following Statement is prepared in accordance with Part 3 of the Human Rights (Parliamentary Scrutiny) Act 2011.
4.1. Overview of the Legislative Instrument
This amendment allows for a transition between ADR 3/03 and the later version ADR 3/04. It does not affect the original intent or operation of the standard.
4.2. Human Rights Implications
This amendment to ADR 3/03 does not engage any of the human rights and freedoms recognised or declared in the international instruments listed in section 3 of the Human Rights (Parliamentary Scrutiny) Act 2011.
4.3. Conclusion
This amendment to ADR 3/03 is compatible with human rights, as it does not raise any human rights issues.