Vehicle Standard (Australian Design Rule 23/03 – Passenger Car Tyres) 2018

Made under section 7 of the Motor Vehicle Standards Act 1989

Explanatory Statement

Issued by the authority of the Assistant Minister to the Deputy Prime Minister

October 2018

Contents

1. LEGISLATIVE CONTEXT......................................3

2. CONTENT AND EFFECT OF ADR 23/03 – PASSENGER CAR TYRES.3

2.1. Overview of the ADR...........................................3

2.2. Effect of the ADR..............................................3

2.3. Incorporated Documents.........................................3

3. BEST PRACTICE REGULATION................................4

3.1. Benefits and Costs..............................................4

3.2. General Consultation Arrangements................................4

3.3. Specific Consultation Arrangements for this Vehicle Standard...........5

4. STATEMENT OF COMPATIBILITY WITH HUMAN RIGHTS........5

4.1. Overview of the Legislative Instrument.............................5

4.2. Human Rights Implications.......................................5

4.3. Conclusion...................................................5

1.                       LEGISLATIVE CONTEXT

The Vehicle Standard (Australian Design Rule 23/03 – Passenger Car Tyres) 2018 is made under the Motor Vehicle Standards Act 1989 (the Act).  The Act enables the Australian Government to establish nationally uniform standards that apply to new road vehicles when they are first supplied to the market in Australia.  The Act applies to such vehicles whether they are manufactured in Australia or imported.

The making of the vehicle standards necessary for the Act’s effective operation is provided for in section 7, which empowers the Minister to “determine vehicle standards for road vehicles or vehicle components”.

The Vehicle Standard (Australian Design Rule 23/03 – Passenger Car Tyres) 2018 (ADR 23/03) is a new standard made as part of a restructure and replacement of the Australian Design Rule 42/04 – General Safety Requirements (ADR 42/04).  It is fully harmonised with the relevant international standard, the United Nations (UN) Regulation No. 30 (R 30).

2.                       CONTENT AND EFFECT OF ADR 23/03 – PASSENGER CAR TYRES

2.1.                 Overview of the ADR

This vehicle standard prescribes requirements of new pneumatic tyres designed primarily for passenger cars and other light vehicles (including light trailers).

2.2.                 Effect of the ADR

The circumstances under which vehicles must comply with this standard are set out in the Australian Design Rule 95/… – Installation of Tyres.  This standard does not apply to new light truck or new truck/bus tyres (otherwise known as commercial vehicle tyres, or Class C2 or C3 tyres; and designed primarily for vehicles of UN categories M2, N2 , N3, O3 and O4), or re-treaded tyres fitted to trailers, or any temporary-use spare unit(s) supplied with a vehicle.

For vehicles fitted with passenger car tyres, the tyres fitted must comply with the requirements of Appendix A as varied by Section 6 Exemptions and Alternative Procedures, or the alternative standard listed under clause 7.

2.3.                 Incorporated Documents

Clause 7 of this standard incorporates a reference to the UN Regulation No. 30 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF PNEUMATIC TYRES FOR MOTOR VEHICLES AND THEIR TRAILERS (R 30).  This is an international standard for passenger car tyres.

Appendix A of this standard incorporates references to the Consolidated Resolution on the Construction of Vehicles (R.E.3.) – document ECE/TRANS/WP.29/78/Rev.1, and ISO 4000-1:2010.  R.E.3. includes the UN vehicle category definitions for motor vehicles and trailers.  ISO 4000-1:2010 specifies dimensions, maximum inflation pressure and load carrying capacity of passenger car tyres by size designation.

In accordance with subsections 14(1)(b) and 14(2) of the Legislation Act 2003, each standard incorporated by reference is incorporated as in force at the commencement of the Determination.

The Consolidated Resolution on the Construction of Vehicles (R.E.3.) – document ECE/TRANS/WP.29/78/Rev.1 and the UN Regulations (including R 30) may be freely accessed online through the UN World Forum for the Harmonization of Vehicle Regulations (WP.29).  The WP.29 website is www.unece.org/trans/main/welcwp29.html.

ISO 4000-1:2010 is available for purchase only through the International Organization for Standardization (ISO) and various associated national standards bodies.  This standard has been referenced in national, regional and international vehicle standards for many years.  Vehicle manufacturers, tyre manufacturers and test facilities access this standard as part of their professional library.

3.                       BEST PRACTICE REGULATION

3.1.                 Benefits and Costs

This vehicle standard will have a neutral regulatory impact, including in terms of both the benefits and costs of regulation.

3.2.                 General Consultation Arrangements

It has been longstanding practice to consult widely on proposed new or amended vehicle standards.  For many years, there has been active collaboration between the Commonwealth and the state/territory governments, as well as consultation with industry and consumer groups.  Much of the consultation takes place within institutional arrangements established for this purpose.  The analysis and documentation prepared in a particular case, and the bodies consulted, depend on the degree of impact the new or amended standard is expected to have on industry or road users.

Depending on the nature of the proposed changes, consultation could involve the Technical Liaison Group (TLG) and the Australian Motor Vehicle Certification Board (AMVCB), the Strategic Vehicle Safety and Environment Group (SVSEG) and the Safe Vehicles Theme Group (SVTG), the Transport and Infrastructure Senior Officials’ Committee (TISOC) and the Transport and Infrastructure Council (the Council).

• TLG consists of technical representatives of government (Australian and state/territory), the manufacturing and operational arms of the industry (including organisations such as the Federal Chamber of Automotive Industries and the Australian Trucking Association) and of representative organisations of consumers and road users (particularly through the Australian Automobile Association).  AMVCB consists of the government members of TLG.
• SVSEG consists of senior representatives of government (Australian and state/territory), the manufacturing and operational arms of the industry and of representative organisations of consumers and road users (at a higher level within each organisation as represented in TLG).  SVTG consists of the government members of SVSEG.
• TISOC consists of state and territory transport and/or infrastructure Chief Executive Officers (CEOs) (or equivalents), the CEO of the National Transport Commission, New Zealand and the Australian Local Government Association.
• The Council consists of the Australian, state/territory and New Zealand Ministers with responsibility for transport and infrastructure issues.

Editorial changes and changes to correct errors are processed by the Department of Infrastructure, Regional Development and Cities (the Department).  This approach is only used where the amendments do not vary the intent of the vehicle standard.

Proposals that are regarded as significant need to be supported by a Regulation Impact Statement meeting the requirements of the Office of Best Practice Regulation (OBPR) as published in the Australian Government Guide to Regulation and the Council of Australian Government’s Best Practice Regulation: A Guide for Ministerial Councils and Standard-Setting Bodies.

3.3.                 Specific Consultation Arrangements for this Vehicle Standard

As the requirements of this standard are no more or less stringent than ADR 23/02, it will not affect the types of passenger car tyres that may be fitted to vehicles.  It is simply being made to facilitate a transition between the certification of vehicles to ADR 42/04 and the later ADR 42/05 (including to the associated ADR 95/00).  Detailed consultation on the content of this standard was therefore not considered necessary and so not carried out.

The Department consulted with the Office of Best Practice Regulation (OBPR) within the Department of Prime Minister and Cabinet on this standard.  A Regulation Impact Statement is not required, as the decision maker is not the Australian Government’s Cabinet, and this vehicle standard will have a neutral regulatory impact.  The OBPR reference number is 24176.

4.                       STATEMENT OF COMPATIBILITY WITH HUMAN RIGHTS

The following Statement is prepared in accordance with Part 3 of the Human Rights (Parliamentary Scrutiny) Act 2011.

4.1.                 Overview of the Legislative Instrument

This vehicle standard prescribes requirements of new pneumatic tyres designed primarily for passenger cars and other light vehicles (including light trailers).

4.2.                 Human Rights Implications

ADR 23/03 does not engage any of the human rights and freedoms recognised or declared in the international instruments listed in section 3 of the Human Rights (Parliamentary Scrutiny) Act 2011.

4.3.                 Conclusion

ADR 23/03 is compatible with human rights, as it does not raise any human rights issues.