Trade Practices (Consumer Product Safety Standard - Corded Internal Window Coverings) Amendment Regulations 2010 (No. 1)

Administered by Department of the Treasury

Legislation au F2010L03089 Regulations Not in force Legislative Instrument

Legislation content

explanatory STATEMENT

Select Legislative Instrument 2010 No. 306

Issued by the Authority of the Parliamentary Secretary to the Treasurer

Trade Practices Act 1974

Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Amendment Regulations 2010 (No. 1)

Subsection 172(1) of the Trade Practices Act 1974 (the Act) provides, in part, that the Governor‑General may make Regulations, not inconsistent with the Act, prescribing all matters that are required or permitted by the Act to be prescribed or are necessary or convenient to be prescribed for carrying out or giving effect to the Act.

Paragraph 65C(1)(a) of the Act provides that a corporation shall not, in trade or commerce, supply goods that are intended to be used, or are of a kind likely to be used, by a consumer if there is a prescribed consumer product safety standard for those goods and they do not comply with that standard.

Subsection 65C(2) of the Act provides that a regulation may, in respect of goods of a particular kind, prescribe a consumer product safety standard consisting of such requirements as are reasonably necessary to prevent or reduce risk of injury to any person.  These requirements may relate to, among other things, contents, design, packaging of goods, and the form and content of warnings or instructions to accompany the goods.

The Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Regulations 2010 (the Principal Regulations) were made on 8 July 2010 and set out a national safety standard for the supply of corded internal window coverings to reduce the incidence of, and potential for, death and injuries to young children. 

The Principal Regulations give effect to a decision by the Council of Australian Governments to introduce a national product safety regime which harmonises existing State and Territory product safety requirements.  The Principal Regulations require that corded internal window coverings supplied after 30 December 2010 must be provided with warning labels that highlight the strangulation hazard to children and be accompanied by installation instructions and any components specified in the installation instructions.  The Principal Regulations replaced similar existing safety standards at the State and Territory level.

The purpose of the Regulations is to insert a transitional regulation into the Principal Regulations so that, starting on 31 December 2010 and ending at the end of 30 June 2011, compliance with an existing State or Territory instrument or provision of an instrument is taken to be compliance with the safety standards in the Principal Regulations.  The effect of the Regulations is to provide corded internal window covering suppliers with additional time to comply with the Principal Regulations, provided that they continue to meet the requirements of existing State and Territory regulations.  Additional time provides suppliers with the opportunity to sell stock which complies with existing State and Territory regulations, therefore avoiding stock losses.

Details of the Regulations are in Attachment A.

 

 

 

The Regulations are a legislative instrument for the purposes of the Legislative Instruments Act 2003.  For the purposes of section 17 of that Act, corded internal window covering suppliers have been consulted prior to developing the Regulations and have agreed to the additional time to continue selling stock which complies with the State and Territory regulations. 

The Regulations commence on the day after they are registered on the Federal Register of Legislative Instruments.


ATTACHMENT A

Details of the Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Amendment Regulations 2010 (No. 1)

Regulation 1 – Name of Regulations

This regulation provides that the name of the Regulations is the Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Amendment Regulations 2010 (No. 1).

Regulation 2 – Commencement

This regulation provides that the Regulations commence on the day after they are registered.

Regulation 3 – Amendment of Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Regulations 2010

This regulation provides that Schedule 1 amends the Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Regulations 2010.

Schedule 1 inserts transitional regulation 4A into the Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Regulations 2010.  Regulation 4A provides that, starting on 31 December 2010 and ending at the end of 30 June 2011, compliance with a State or Territory instrument or provision of an instrument, as listed in the Regulations, is taken to be compliance with regulations 6 to 9 of the Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Regulations 2010.

Overview

The Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Amendment Regulations 2010 (No. 1) were enacted to address the need for harmonising safety standards for corded internal window coverings across Australia. This legislation was introduced by the Australian Government and is an amendment to the Trade Practices Act 1974, which aims to ensure fair trading practices and protect consumers. The primary objective of these regulations is to provide a transitional period for suppliers of corded internal window coverings to comply with the new national safety standards, while allowing them to sell existing stock that meets the previous state and territory regulations. This transitional period is designed to mitigate potential stock losses and ensure a smooth implementation of the new safety standards.

Scope and Application

The Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Amendment Regulations 2010 (No. 1) applies to all corporations engaged in the supply of corded internal window coverings in trade or commerce within Australia. These Regulations are an amendment to the Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Regulations 2010, which were enacted to ensure a national safety standard for the supply of such products, thereby reducing the risk of injury, particularly to young children. This amendment provides a transitional period for compliance, allowing suppliers additional time to transition to the new national safety standards. The Regulations provide that compliance with certain State or Territory provisions is deemed to be compliance with the national standards from 31 December 2010 until 30 June 2011, thereby facilitating a smoother transition and allowing suppliers to liquidate existing stock that meets the old standards. This amendment does not alter the fundamental obligations under the Trade Practices Act 1974 but extends the compliance period to ensure that suppliers are not unduly disadvantaged during the transition to the new national standards.

Key Provisions

The Trade Practices (Consumer Product Safety Standard – Corded Internal Window Coverings) Amendment Regulations 2010 (No. 1) primarily concern the transitional period for compliance with new national safety standards for corded internal window coverings. According to Regulation 4A, inserted by the Amendment Regulations into the Principal Regulations, compliance with certain existing State or Territory instruments or provisions of instruments is deemed to be compliance with the Principal Regulations (Regulation 6 to 9) during the period from 31 December 2010 to 30 June 2011 (Regulation 3). This transitional period is intended to allow suppliers of corded internal window coverings additional time to sell existing stock that meets older State or Territory standards while transitioning to the new national standards. Under the amended Principal Regulations, suppliers of corded internal window coverings have specific obligations. They must ensure that any products supplied after 30 December 2010 comply with the national safety standards, including the requirement for warning labels highlighting the strangulation hazard to children and the inclusion of installation instructions and any specified components (Regulation 6 to 9). During the transitional period, compliance with the relevant existing State or Territory standards is sufficient to meet these obligations (Regulation 4A). Failure to comply with the Principal Regulations may result in legal consequences. Specifically, Section 65C(1)(a) of the Trade Practices Act 1974 states that a corporation cannot supply goods in trade or commerce if there is a prescribed consumer product safety standard and the goods do not comply with that standard. Non-compliance with these provisions could lead to enforcement actions by relevant authorities, which may include fines and other penalties. While the exact penalties are not specified in the Amendment Regulations, they are likely to be consistent with those applicable under the Trade Practices Act 1974, which can include significant fines for corporations and, in some cases, criminal penalties for individuals responsible for the non-compliance.

Legal classification tags

Area of Law
Consumer Law
Instrument
Regulation
Concepts
Definitions & Interpretation
Compliance Obligations
Transitional Provisions

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.