Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network — AS/ACIF S006) Amendment 2003 (No. 1)
The AUSTRALIAN COMMUNICATIONS AUTHORITY makes this Technical Standard under subsection 376 (1) of the Telecommunications Act 1997.
Dated 12 November 2003 R HORTON Chair
A HORSLEY Deputy Chair
Australian Communications Authority
1 Name of Technical Standard
This Technical Standard is the Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network — AS/ACIF S006) Amendment 2003 (No. 1).
2 Commencement
This Technical Standard commences on gazettal.
3 Amendment of Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network — AS/ACIF S006) 2001
Schedule 1 amends the Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network — AS/ACIF S006) 2001.
Schedule 1 Amendments
(section 3)
[1] Subsection 1 (2), at the foot
insert
Note 1 The alternate citation mentioned in subsection (2) is the name by which the AS/ACIF Standard, adopted by this Technical Standard under section 7, is usually cited. The AS/ACIF Standard was published in 2001.
Note 2 The AS/ACIF Standard, as adopted by this Technical Standard, does not include any amendments made by Standards Australia and the Australian Communications Industry Forum after the commencement of this Technical Standard. If amendments are made, the terms of this Technical Standard will differ from those of the AS/ACIF Standard unless the AS/ACIF amendments are adopted by the ACA.
[2] Section 5, after definition of Act
insert
AS/ACIF Standard means the Australian Standard/Australian Communications Industry Forum Standard: Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network (AS/ACIF S006:2001), published by the Australian Communications Industry Forum and Standards Australia International Limited in January 2001.
Note The AS/ACIF Standard was made by the ACA in January 2001 and gazetted on 5 April 2001. An identical version of the Standard was published by ACIF in April 2001.
[3] Section 7
substitute
7 Standard for customer equipment
The customer equipment to which this Technical Standard applies must comply with the AS/ACIF Standard.
Overview
The Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network — AS/ACIF S006) Amendment 2003 (No. 1) was enacted in 2003 by the Australian Communications Authority (ACA) to address technical compliance requirements for customer equipment operating within the voiceband of the non-switched telecommunications network. This amendment sought to update the existing technical standards to reflect current technological advancements and ensure compatibility with the telecommunications infrastructure. The policy objective of this legislative instrument is to maintain the quality and reliability of telecommunications services by setting stringent technical criteria for customer equipment.
This amendment was introduced under subsection 376(1) of the Telecommunications Act 1997, which empowers the ACA to establish technical standards necessary for the efficient operation of the telecommunications network. The amendment ensures that any customer equipment connected to the non-switched telecommunications network adheres to the specified technical standards, thus promoting a consistent and reliable telecommunications service environment.
Scope and Application
The Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network — AS/ACIF S006) Amendment 2003 (No. 1) applies to any customer equipment operating in the voiceband and connected to the non-switched telecommunications network. This equipment includes, but is not limited to, telephones, fax machines, modems, and any other devices that interface with the telecommunications network through a voiceband connection. The geographic scope of this legislation is national, as it applies across Australia and is administered by the Australian Communications Authority under the Telecommunications Act 1997. The amendment specifies that customer equipment must comply with the Australian Standard/Australian Communications Industry Forum Standard: Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network (AS/ACIF S006:2001). The Act does not explicitly state any exclusions or exemptions, though it is understood that the requirements are designed to ensure compatibility and reliability of customer equipment within the specified telecommunications framework.
Key Provisions
The Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network — AS/ACIF S006) Amendment 2003 (No. 1) introduces amendments to the original 2001 standard (sections 2 and 3). This legislation requires that customer equipment operating in the voiceband for connection to the non-switched telecommunications network must comply with the updated Australian Standard/Australian Communications Industry Forum Standard (AS/ACIF S006:2001). The amendment comes into effect immediately upon gazettal (section 2).
Entities and individuals who supply or install customer equipment within the scope of this amendment must ensure compliance with the AS/ACIF Standard. This includes verifying that the equipment adheres to the specified requirements set out in the amended standard. The obligations extend to manufacturers, importers, retailers, and any other parties involved in the supply chain of the customer equipment. The standard aims to maintain consistent performance and compatibility within the telecommunications network.
The legislation does not explicitly outline specific offences, penalties, or consequences for non-compliance within the text provided. However, it is understood that breaches of technical standards under the Telecommunications Act 1997 can lead to significant penalties. These may include fines and potential legal action against the entities or individuals responsible for the non-compliant equipment. The severity of the penalties can vary based on the extent and impact of the non-compliance, as well as any resulting harm to the telecommunications network or consumers.