EXPLANATORY STATEMENT
Issued by the authority of the Australian Communications and Media Authority
Telecommunications Act 1997
Telecommunications Technical Standard (Requirements for customer cabling products – AS/CA S008:2010) 2011
Purpose
The Telecommunications Technical Standard (Requirements for Customer Cabling Products – AS/CA S008:2010) 2011 (the ACMA 2011 Standard) sets out the requirements that must be met in relation to specified customer cabling (CC) products for the purposes of the Australian telecommunications compliance and labelling regime.
The ACMA 2011 Standard adopts the mandatory technical requirements and test methods for CC products prescribed in a revised industry telecommunications technical standard developed by Communications Alliance Ltd (CA), being AS/CA S008:2010 Requirements for customer cabling products (the CA Standard).
Legislative Provisions
The ACMA 2011 Standard is made under subsection 376(1) of the Telecommunications Act 1997 (the Act). Subsection 376(1) allows the Australian Communications and Media Authority (the ACMA) to make a technical standard in the form of a written instrument relating to specified customer equipment (CE) or specified CC.
Subsection 376(2) of the Act provides that a technical standard made under section 376 can only consist of such requirements as are necessary or convenient for:
- protecting the integrity of a telecommunications network or a facility;
- protecting the health or safety of persons who operate, work on, use services or are otherwise likely to be affected by the operation of, the telecommunications network or facility to which the equipment or cabling is connected;
- ensuring equipment can be used to give access to an emergency call service;
- ensuring interoperability of equipment with a telecommunications network facility used to supply a standard telephone service; or
- achieving an objective specified in the regulations (no regulations have been made to date).
The Act provides at section 377 that in making a technical standard, the ACMA may apply, adopt or incorporate (with or without modification) any matter contained in a standard proposed or approved by Standards Australia International Limited or any other body or association, such as CA. The ACMA’s practice is to review, and where appropriate to adopt, the mandatory requirements of industry telecommunications technical standards developed by CA.
Background
The telecommunications regulatory arrangements require each supplier of an item of CE or CC that falls within the scope of an applicable standard to apply a compliance label to the item prior to supply to the market and to keep prescribed records. Compliance is determined against technical standards made under section 376 of the Act.
The Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 (the TLN) made under section 407 of the Act, lists those standards and applies labelling and record keeping requirements in relation to items of CE and CC covered by a listed standard. The TLN makes it mandatory for a supplier of CC to comply with applicable standards before affixing a label to their product.
The ACMA routinely makes standards under section 376 of the Act adopting mandatory technical requirements contained in industry standards made by CA. The CA Standard adopted in the ACMA 2011 Standard arose out of a review by CA of the industry telecommunications technical standard AS/ACIF S008:2006 Requirements for customer cabling products (the ACIF Standard). The review was undertaken to update referenced standards and to amend various technical requirements identified by industry as necessary.
Operation
The ACMA 2011 Standard adopts the mandatory requirements of the CA Standard prescribing the technical requirements for CC products that are intended for use on the customer side of the boundary of a telecommunications network.
Once referenced in the TLN, and following an overlap period of 24 months provided for in the TLN (the overlap period), the ACMA 2011 Standard will replace the existing ACMA technical standard Telecommunications Technical Standard (Requirements for customer cabling products – AS/ACIF S008:2006) 2006 (the ACMA 2006 Standard) as the standard to be met in order to apply a compliance label to items of CC that are intended for use on the customer side of the boundary of a telecommunications network (the relevant CC products). The ACMA 2006 Standard adopted the now superseded ACIF Standard.
During the overlap period the ACMA 2011 Standard and the ACMA 2006 Standard will remain in force and a supplier may choose to declare compliance against either Standard. After the overlap period is concluded, the ACMA 2006 Standard will no longer be the standard that applies to the relevant CC products for the purposes of the TLN, and a supplier will be required to declare compliance with the ACMA 2011 Standard before affixing a compliance label to the relevant CC products.
Consultation
Subsection 378(1) of the Act requires the ACMA to ensure, so far as practicable, that interested persons have an adequate opportunity to make representations on a proposed technical standard and that due consideration be given to any representation before the ACMA makes the standard.
Subsection 378(2) of the Act permits the ACMA to make an arrangement with an approved body or association for that body or association to prepare, publish and undertake public consultation on a draft standard and to report to the ACMA on the results of that consultation process. CA has accreditation as a Standards Development Organisation from the Accreditation Board for Standards Development Organisations established by Standards Australia Limited (formerly Standards Australia International Limited). The ACMA has a Memorandum of Understanding with CA under which CA is responsible for the development and revision of industry telecommunications technical standards.
The CA Standard adopted by the ACMA 2011 Standard was developed by the CA Customer Cabling Products Revision Working Committee (CA WC24), a committee comprising representatives from the ACMA, relevant sections of industry, and interested parties. In developing the industry standard, CA consulted with both industry and the community.
A draft of the CA Standard was issued for public comment for 62 days from 6 July 2010 to 6 September 2010, in compliance with the requirements for consultation under section 378 of the Act. Copies of the draft of the CA Standard were issued to CA members, CA Customer Equipment and Cable Reference Panel (CECRP) members and CA WC24 members.
A draft of the CA Standard was publicised through the CA newsletter We Communicate, and Standards Australia publications, and a notice was placed in The Australian newspaper. An electronic copy of the draft of the CA Standard was made available for free download on the CA website during the above period. Draft copies were also made available to interested parties who contacted CA directly.
During the consultation period, three public submissions were received and considered by CA. All three submissions were in support of the draft CA Standard, but raised some minor suggested amendments. The ACMA is satisfied that CA satisfactorily addressed these suggestions prior to publishing the CA Standard.
The ACMA considers that appropriate consultation was conducted by CA in relation to the CA Standard adopted by the ACMA 2011 Standard. Therefore, the ACMA is satisfied, pursuant to paragraph 18(2)(e) of the Legislative Instruments Act 2003, that consultation in relation to the ACMA 2011 Standard is unnecessary.
Regulation Impact
The Office of Best Practice Regulation has considered the matter and formed an opinion that the ACMA 2011 Standard will have minor and machinery impact and does not impose any substantial additional regulatory burden on manufacturers or importers of CC products, or the economy. The OBPR RIS exemption number is ID 12079.
Documents Incorporated in this Instrument by Reference
The CA Standard, AS/CA S008:2010 Requirements for customer cabling products, is incorporated by reference in this ACMA 2011 Standard. The CA Standard can be downloaded free of charge from the CA website at:
http://www.commsalliance.com.au/Documents/Technical-CE
Detailed Description of the Instrument
Details of the ACMA 2011 Standard are in Attachment A.
ATTACHMENT A
Notes on Sections
Section 1 Name of Technical Standard
This section provides that the name of the Standard is the Telecommunications Technical Standard (Requirements for Customer Cabling Products – AS/CA S008:2010) 2011.
This section also notes that the ACMA 2011 Standard may also be cited as AS/CA S008-2011. The alternative citation is the name by which the ACMA 2011 Standard is usually cited by the ACMA.
Section 2 Commencement
This section provides for the ACMA 2011 Standard to commence on the day after it is registered on the Federal Register of Legislative Instruments.
Section 3 Definitions
This section provides definitions for terms used in the ACMA 2011 Standard. It includes definitions for customer cabling products and mandatory requirement which are not defined in the Act.
Section 4 Objects of Technical Standard
This section sets out the objects of the ACMA 2011 Standard. These objects are consistent with matters that may be incorporated into a standard as provided by paragraphs 376(2) (a) to (d) of the Act.
Section 5 Application of Technical Standard
This section identifies the scope of application of the ACMA 2011 Standard. It applies to customer cabling products including cable for use by registered cablers beyond a carrier’s network boundary point.
Section 6 Requirements
This section provides that all CC products must comply with the mandatory requirements of the CA Standard as published by Communications Alliance in October 2010.
The CA Standard, as adopted by the ACMA 2011 Standard, does not include any amendments made after the commencement of the ACMA 2011 Standard. If amendments are made, the terms of the ACMA 2011 Standard will differ from those of the CA Standard unless the amendments are adopted by the ACMA.