Telecommunications Technical Standard (Personal Handy Phone System — ACA TS 034 – 1997) Amendment 2001 (No. 1)
as amended
made under subsection 376 (1) of the
Telecommunications Act 1997
This compilation was prepared on 6 January 2005
[This amending instrument was amended by the Telecommunications
Technical Standard (Personal Handy Phone System — ACA TS 034 – 1997) Amendment (No. 1) Amendment 2004 (No. 1)]
Amendments from Amendment 2004 (No. 1)
[Schedule 1 amended section 1
Schedule 1 commenced on 16 December 2004]
Prepared by the Office of Legislative Drafting and Publishing,
Attorney-General’s Department, Canberra
1 Name of instrument
(1) This instrument is the Telecommunications Technical Standard (Personal Handy Phone System — ACA TS 034 – 1997) Amendment 2001 (No. 1).
(2) This instrument may also be cited as ACA TS034–1997 (Amdt 1).
2 Commencement
This instrument commences on gazettal.
3 Amendment of Telecommunications Technical Standard (Personal Handy Phone System — ACA TS 034 – 1997)
Schedule 1 amends the Telecommunications Technical Standard (Personal Handy Phone System — ACA TS 034 – 1997).
Schedule 1 Amendments
(section 3)
[1] Section 3
omit
For paragraphs 376 (2) (a),
insert
(1) For paragraphs 376 (2) (a),
[2] Section 3
insert
(2) However, Table 1 after clause 5.2.2.2 in that document is replaced by the following table:
Carrier
Number | Frequency (MHz) | Usage |
1 | 1,895.150 | Communication Carriers of Private/Public Systems |
2 | 450 |
3 | 750 |
4 | 1,896.050 |
5 | 350 |
6 | 650 | Control Carrier for Private/Public Systems |
7 | 950 | Communication Carriers of Private/Public Systems |
8 | 1,897.250 |
9 | 550 |
10 | 850 |
11 | 1,898.150 |
12 | 450 | Control Carrier for Private/Public Systems |
13 | 750 | Communication Carriers of Private/Public Systems |
14 | 1,899.050 |
15 | 350 |
16 | 650 |
(3) Also, Figure 6 in that document is replaced by the following figure:
Frequencies | Private use | Public use | |
(Household, office etc.) | |
1895.0 MHz | Communication physical slots (Note 1) | Usage for communication Carrier for Private/Public Systems (5 frequencies) |
1896.5 MHz | Control physical slots | | Control carrier for Private/Public Systems (1 Frequency) |
1896.8 MHz | Communication physical slots (Note 1) | Usage for communication Carrier for Private/Public Systems (5 frequencies) |
1898.3 MHz | Control physical slots | | Control carrier for Private/Public Systems (1 Frequency) |
1898.6 MHz | Communication physical slots (Note 1) | Usage for communication carrier for Private/Public Systems (4 frequencies) |
1899.8 MHz |
Note 1 Control physical slots for USCCH option.
Figure 6
Mapping of Physical Slots on Frequency Axis
Overview
The Telecommunications Technical Standard (Personal Handy Phone System – ACA TS 034 – 1997) Amendment 2001 (No. 1) was enacted to update and refine the technical standards for Personal Handy Phone Systems (PHS), which are mobile communication systems, under the Telecommunications Act 1997. This legislation was introduced to address the need for precise technical standards to ensure the interoperability and efficient operation of PHS technologies within Australia. The objective of the amendment is to align these standards with the evolving technological landscape and regulatory requirements, ensuring that telecommunications infrastructure remains robust, reliable, and capable of meeting the needs of both private and public systems.
This legislative instrument was enacted by the relevant legislature, specifically under subsection 376(1) of the Telecommunications Act 1997, and it is maintained and updated by the Office of Legislative Drafting and Publishing, Attorney-General’s Department in Canberra. The policy objective is to maintain high-quality standards that support the effective functioning of telecommunications infrastructure, thereby facilitating better communication services across Australia.
Scope and Application
The Telecommunications Technical Standard (Personal Handy Phone System - ACA TS 034 - 1997) Amendment 2001 (No. 1) amends the technical standards applicable to Personal Handy Phone Systems (PHS) in Australia. This amendment applies to all entities and persons involved in the use, manufacture, or distribution of PHS equipment, including telecommunications companies, manufacturers, and importers. The amendment was made under subsection 376(1) of the Telecommunications Act 1997 and is applicable nationwide, ensuring consistency in technical standards across the Commonwealth of Australia. The amendment also incorporates changes from the Telecommunications Technical Standard (Personal Handy Phone System - ACA TS 034 - 1997) Amendment (No. 1) Amendment 2004 (No. 1), which further refines the technical specifications to enhance interoperability and compliance with telecommunications regulations. This legislative instrument provides a clear framework for the technical standards that PHS equipment must adhere to, ensuring reliable and efficient telecommunications services.
Key Provisions
The main operative sections of the Telecommunications Technical Standard (Personal Handy Phone System – ACA TS 034 – 1997) Amendment 2001 (No. 1) (section 3) detail specific changes to the original technical standard concerning the Personal Handy Phone System (PHS). The amendment primarily affects the frequency allocation and usage outlined in the document. For instance, it updates the table in clause 5.2.2.2 to reflect new frequency assignments for communication and control carriers, both for private and public systems. Additionally, it revises Figure 6, which maps the physical slots on the frequency axis, to align with the new technical requirements.
The obligations imposed by this amendment on parties governed by the Act are primarily technical in nature. Telecommunications operators must ensure their systems comply with the updated frequency allocations and configurations as specified in the amended document. This includes adjusting their equipment and infrastructure to operate within the newly defined frequency bands and using the correct physical slots for communication and control purposes. Operators must also ensure that their systems adhere to the revised mapping of physical slots on the frequency axis, which is critical for maintaining effective communication and control functions.
Failure to comply with the updated technical standards could result in various consequences. While the specific penalties for non-compliance are not detailed in the text, breaches of telecommunications standards can generally lead to enforcement actions by regulatory authorities. In severe cases, non-compliance may result in fines or other penalties as stipulated under the overarching Telecommunications Act 1997. Operators who do not adhere to the technical standards may also face operational disruptions, reduced service quality, and potential legal actions from affected parties. Ensuring compliance is, therefore, crucial for maintaining the integrity and functionality of telecommunications services.