Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001

Administered by Department of Communications and the Arts

Legislation au F2005B00720 Not in force Legislative Instrument

Legislation content

Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001

as amended

made under subsection 376 (1) of the

Telecommunications Act 1997

This compilation was prepared on 14 February 2005
taking into account amendments up to Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 2)

Prepared by the Office of Legislative Drafting and Publishing,
Attorney-General’s Department, Canberra

Contents

 1 Name of Technical Standard [see Note 1]

 2 Commencement [see Note 1]

 3 Revocation of ACA Technical Standard 002–1997 

 4 Objects of Technical Standard 

 5 Definitions 

 6 Application of Technical Standard 

 7 Standards with which customer equipment must comply 

Notes  

 

 

 

 

1 Name of Technical Standard [see Note 1]

 (1) This Technical Standard is the Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001.

 (2) This Technical Standard may also be cited as AS/ACIF S002–2001.

Note 1   The alternate citation mentioned in subsection (2) is the name by which the AS/ACIF Standard, adopted by this Technical Standard under section 7, is usually cited. The AS/ACIF Standard was published in 2001.

Note 2   The AS/ACIF Standard, as adopted by this Standard, does not include any amendments that may subsequently be made by Standards Australia and the Australian Communications Industry Forum. If amendments are made, the terms of this Technical Standard will differ from those of the AS/ACIF Standard unless the AS/ACIF Standard amendments are adopted by the ACA.

2 Commencement [see Note 1]

  This Technical Standard commences on gazettal.

3 Revocation of ACA Technical Standard 002–1997

  ACA Technical Standard 002–1997, made by the Australian Communications Authority on 4 December 1997 and notified in the Commonwealth of Australia Gazette on 8 December 1997, is revoked.

Note   The Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 contains arrangements for the continuing operation of ACA Technical Standard 002–1997 in certain circumstances.

4 Objects of Technical Standard

  The objects of this Technical Standard are:

 (a) to protect the integrity of telecommunications networks and facilities; and

 (b) to protect the health and safety of persons who:

 (i) operate; or

 (ii) work on; or

 (iii) use services supplied by means of; or

 (iv) are otherwise reasonably likely to be affected by the operation of 

a telecommunications network or facility; and

 (c) to ensure that customer equipment:

 (i) designed, or intended, for connection to a telecommunications network; and

 (ii) used to supply a voice frequency service 

can be used to give access to an emergency call service; and

 (d) to ensure the interoperability of customer equipment used in the supply of a standard telephone service with a telecommunications network.

5 Definitions

  In this Technical Standard:

Act means the Telecommunications Act 1997.

analogue interface means an interface which operates with analogue signals.

AS/ACIF Standard means the Australian Communications Industry Forum/ Australian Standard: Analogue interworking and noninterference requirements for Customer Equipment for connection to the Public Switched Telephone Network (AS/ACIF S002: 2001) as existing on 5 April 2001.

AS/ACIF S002-2001 (Amdt No. 1/2002) means amendment No. 1 of the Australian Communications Industry Forum/Australian Standard: Analogue interworking and noninterference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002: 2001 as published by the Australian Communications Industry Forum and Standards Australia International Limited in December 2001.

AS/ACIF S002-2001 (Amdt No. 2/2004) means the amendment of the Australian Communications Industry Forum/Australian Standard: Analogue interworking and non-interference Requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002:2001, as published by the Australian Communications Industry Forum and Standards Australia International Limited in July 2004.

customer equipment has the same meaning as in subsection 21 (1) of the Act.

facility has the same meaning as in subsection 374 (2) of the Act.

public switched telephone network means the part of a telecommunications network which enables a customer to establish a connection for voice frequency communication with another customer, either automatically or with operator assistance.

telecommunications network has the same meaning as in subsection 374 (1) of the Act.

Note   The following expressions used in this Technical Standard are defined in section 7 of the Act:

 emergency call service

 standard telephone service.

6 Application of Technical Standard

  This Technical Standard applies to customer equipment that is designed, or intended, for connection to the public switched telecommunications network through an analogue interface.

7 Standards with which customer equipment must comply

  Customer equipment to which this Technical Standard applies must comply with the AS/ACIF Standard, as amended by:

 (a) AS/ACIF S002-2001 (Amdt No. 1/2002); and

 (b) AS/ACIF S002-2001 (Amdt No. 2/2004).

Notes to the Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001

Note 1

The Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001 (in force under subsection 376 (1) of the Telecommunications Act 1997) as shown in this compilation is amended as indicated in the Tables below.

Table of Instruments

Title

Date of notification
in Gazette or
FRLI registration

Date of
com  mencement

Application, saving or
transitional provisions

Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001

5 Apr 2001 (see Gazette 2001, No. S118)

5 Apr 2001

 

Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2002 (No. 1)

15 Mar 2002
(see Gazette 2002, No. S84)

15 Mar 2002

AS/ACIF S002-2001 (Amdt 1)

16 Dec 2004
(see Gazette 2004, No. S516)

16 Dec 2004

AS/ACIF S002-2001 (Amdt 2)

16 Dec 2004
(see Gazette 2004, No. S516)

16 Dec 2004

Table of Amendments

ad. = added or inserted      am. = amended      rep. = repealed      rs. = repealed and substituted

Provision affected

How affected

Note 1 to s. 1 (2)........

ad. 2002 No. 1

 

rs. 2004 No. 1

Note 2 to s. 1 (2)........

ad. 2002 No. 1

 

rs. 2004 No. 1

S. 5.................

am. 2002 No. 1; 2004 Nos. 1 and 2

S. 7.................

rs. 2002 No. 1

 

rs. 2004 Nos. 1 and 2

 

Overview

The Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001 was enacted under the authority of the Telecommunications Act 1997. This technical standard aims to address issues related to the integrity and safety of telecommunications networks, ensuring that customer equipment designed for connection to the Public Switched Telephone Network (PSTN) can interwork and not cause interference. The objects of this technical standard include protecting the integrity of telecommunications networks and facilities, safeguarding the health and safety of individuals who interact with these networks, and ensuring that customer equipment can access emergency call services and interoperate with telecommunications networks. The technical standard was made by the Australian Communications Authority (ACA) and is subject to amendments as indicated in subsequent legislative instruments. The technical standard applies to customer equipment that is intended for connection to the PSTN through an analogue interface. It mandates compliance with the Australian Communications Industry Forum/Australian Standard (AS/ACIF S002:2001) and its subsequent amendments, AS/ACIF S002-2001 (Amendment No. 1/2002) and AS/ACIF S002-2001 (Amendment No. 2/2004). The technical standard came into effect upon gazettement and has been subject to amendments as reflected in the legislative tables and notes.

Scope and Application

The Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001, made under section 376(1) of the Telecommunications Act 1997, applies to customer equipment designed or intended for connection to the public switched telecommunications network through an analogue interface. This legislation aims to safeguard the integrity of telecommunications networks and facilities, protect the health and safety of individuals interacting with telecommunications networks, and ensure customer equipment can access emergency call services and interoperate with telecommunications networks providing standard telephone services. The Act revokes the previous ACA Technical Standard 002–1997, although certain arrangements allow its continued operation under specific conditions as outlined in the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001. The Technical Standard has been amended by subsequent legislative instruments to update the standards customer equipment must meet, as detailed in the Table of Amendments. The amendments have been incorporated into this compilation, reflecting the current requirements for customer equipment to comply with the AS/ACIF Standard, as amended by AS/ACIF S002-2001 (Amdt No. 1/2002) and AS/ACIF S002-2001 (Amdt No. 2/2004).

Key Provisions

The Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001, as amended, sets out the requirements for customer equipment intended for connection to the public switched telecommunications network through an analogue interface. The Standard, which is also known as AS/ACIF S002–2001, commenced on 5 April 2001 and revokes the ACA Technical Standard 002–1997. The objects of this Technical Standard, as outlined in section 4, include protecting the integrity of telecommunications networks and facilities, safeguarding the health and safety of individuals who interact with these networks, and ensuring customer equipment can access emergency call services and interoperate with telecommunications networks. The Technical Standard applies to customer equipment designed or intended for connection to the public switched telecommunications network through an analogue interface, as specified in section 6. To comply with this Standard, customer equipment must adhere to the AS/ACIF Standard, as amended by AS/ACIF S002-2001 (Amdt No. 1/2002) and AS/ACIF S002-2001 (Amdt No. 2/2004), as detailed in section 7. The definitions section (section 5) provides clarification on terms such as "analogue interface," "AS/ACIF Standard," and "customer equipment," among others. Breach of the requirements set out in this Technical Standard could have legal ramifications, including enforcement actions under the Telecommunications Act 1997. The Act provides for various offences and penalties, including fines and imprisonment, for non-compliance with telecommunications standards and regulations. The maximum penalties for these offences can vary depending on the specific provision breached and the circumstances of the offence. However, the specific offences, penalties, and consequences for breaching this Technical Standard are not detailed within the Standard itself, and would need to be referred to in the Telecommunications Act 1997 and related legislation.

Legal classification tags

Area of Law
Technology Law
Instrument
Legislative Instrument
Concepts
Definitions & Interpretation
Commencement Provisions
Regulatory Standards
Enforcement Powers

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.