Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Amendment Technical Standard 2002 (No. 1)
The AUSTRALIAN COMMUNICATIONS AUTHORITY makes this amendment under subsection 376 (1) of the Telecommunications Act 1997.
Dated 11 December 2002
A.J SHAW Chair
R HORTON Deputy Chair
Australian Communications Authority
1 Name of amendment
This amendment is the Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Amendment Technical Standard 2002 (No. 1).
2 Commencement
This amendment commences on gazettal.
3 Amendment of Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Technical Standard 2001
Schedule 1 amends the Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Technical Standard 2001.
Schedule 1 Amendments
(section 3)
Do not delete: Schedule Part Placeholder
[1] Section 5
omit
AS/ACIF S008:2001.
insert
AS/ACIF S008:2001, modified as set out in Schedule 1.
[2] After section 5
insert
Schedule 1 Modification of AS/ACIF S008:2001
(section 5)
[1] Clause 3, item 29
substitute
[29] | IEC 60794–1–2–F5B:1999 | Water Penetration Test |
[2] Clause 5.7.1
substitute
5.7.1 Application
Clause 5.7.2 applies to all types of cabling excluding blown fibre tube systems except where otherwise stated. Other customer cables requirements are specified in Clauses 5.8, 5.9 and 5.10.
[3] Clauses 5.7.2.1 and 5.7.2.2
substitute
5.7.2.1 Cable
5.7.2.1.1 Cables solely intended for telecommunications purposes shall not be of a design or type commonly used for mains power.
5.7.2.1.2 Outdoor cable intended to be installed underground shall comply with the requirements for Water Penetration specified in IEC 60794-1-2–F5B [29].
5.7.2.1.3 Where a recognizable telecommunications cable does not exist or the cable is designed for Multidiscipline use (e.g. designed for special applications such as MIMS cable), the requirements in Clause 5.10 are applicable.
5.7.2.1.4 The outer tube or sheath of an underground blown fibre tube shall comply with —
(a) the requirements of IPX8 of AS 1939 [6]; and
(b) the sheath requirements of Clause 5.7.2.2.2 or Clause 5.7.2.2.3.
5.7.2.2 Insulation and sheath materials
5.7.2.2.1 Telecommunications use
The insulation and sheath materials used shall be suitable for telecommunications use.
5.7.2.2.2 Non-PVC insulation and sheath
Non-PVC insulation and sheath materials shall comply with the requirements of AS 1049 [2] for —
(a) Tensile Strength Test (Aged/Unaged);
(b) Elongation Test (Aged/Unaged);
(c) Shrinkback Tests for that particular type of insulation and sheathing; and
(d) cables exposed to UV radiation for sheath of outdoor cable only.
Compliance with Clause 5.7.2.2.2 (d) is determined by the manufacturer’s declaration.
5.7.2.2.3 PVC insulation and sheath
PVC insulation and sheath materials shall comply with —
(a) the requirements of Table 1 and Table 2; and
(b) the requirements of AS 1049 [2] for cables exposed to UV radiation for outdoor cable only.
Compliance with Clause 5.7.2.2.3 (b) is determined by the manufacturer’s declaration.
Overview
The Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Amendment Technical Standard 2002 (No. 1) was enacted by the Australian Communications Authority under subsection 376(1) of the Telecommunications Act 1997. This amendment was introduced to update and refine the technical standards for authorised cabling products as outlined in AS/ACIF S008:2001, ensuring that they remain relevant and effective in providing quality telecommunications infrastructure. The policy objective behind this amendment is to maintain the integrity and safety of cabling products used in telecommunications networks, thereby supporting the broader goals of the Telecommunications Act 1997 in fostering efficient and reliable communication services across Australia. This technical standard amendment came into effect upon gazettement, ensuring that the updated requirements are promptly implemented.
Scope and Application
The Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Amendment Technical Standard 2002 (No. 1) applies to the cabling products used in telecommunications networks within Australia. The amendment updates and modifies the technical standard for authorised cabling products as specified by AS/ACIF S008:2001. This includes modifications to the requirements for cable design, insulation, and sheath materials to ensure they are suitable for telecommunications use, particularly focusing on outdoor and underground installations. The amendment applies nationally across Australia, under the jurisdiction of the Australian Communications Authority, which made this amendment under the authority granted by subsection 376(1) of the Telecommunications Act 1997. The changes aim to enhance the reliability and safety of telecommunications cabling infrastructure by specifying stringent requirements for different types of cables and their materials, ensuring they meet international and Australian standards.
Key Provisions
The Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Amendment Technical Standard 2002 (No. 1) amends the existing Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Technical Standard 2001. Specifically, Section 5 of the original Standard is omitted and replaced with the modified version detailed in Schedule 1. This schedule modifies Clause 3, item 29 by substituting the existing reference to AS/ACIF S008:2001 with a reference to the amended standard. It also inserts new clauses, such as Clause 5.7.1, which applies to all types of cabling excluding blown fibre tube systems. Clauses 5.7.2.1 and 5.7.2.2 have also been substituted to address the design and materials used for telecommunications cables.
Under this legislation, entities must ensure that telecommunications cables comply with the specified standards. This includes ensuring that cables are not of a design or type commonly used for mains power, that outdoor cables intended for underground installation meet water penetration requirements, and that the insulation and sheath materials are suitable for telecommunications use. For instance, non-PVC insulation and sheath materials must comply with AS 1049, while PVC materials must meet the requirements of the amended standard and AS 1049 for UV radiation exposure. The compliance of these materials is determined by the manufacturer’s declaration.
Failure to comply with the provisions of this amended standard may result in penalties. Although the specific penalties are not detailed in the legislative instrument, non-compliance with telecommunications standards generally can lead to enforcement actions by the Australian Communications Authority. This may include fines, legal proceedings, and other regulatory measures. The precise penalties would depend on the severity and nature of the breach, as well as any relevant legislation governing telecommunications compliance.
In summary, the Telecommunications (Requirements for Authorised Cabling Products AS/ACIF S008:2001) Amendment Technical Standard 2002 (No. 1) introduces modifications to the technical requirements for authorised cabling products, ensuring that they meet specific design and material standards. Entities governed by this standard must adhere to these specifications to avoid potential penalties and enforcement actions.