Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.2)

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au C2024G00475 In force Gazette

Legislation content

HEAVY VEHICLE NATIONAL LAW

Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.2)

 

  1. Purpose

 

1) This notice grants exemptions from prescribed dimension requirements for a class 3 heavy vehicle that includes a pig trailer carrying a specified item such as a light aircraft, yacht, rowing boat or surfboat.

 

2) This notice revokes and replaces the Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.1).

 

2.       Authorising provision

 

1)      This notice is made under the following provision of the Heavy Vehicle National Law (HVNL):

 

a)      section 117 – Regulator’s power to exempt category of class 1 or 3 heavy vehicles from compliance with mass or dimension requirement;

b)      section 23 of Schedule 1 – Regulator’s power to amend or repeal instrument.

 

3.       Title

 

This notice may be cited as the Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.2).

 

4.       Commencement date

 

This notice commences on 16 August 2024.

 

5.       Expiry date

 

This notice expires on 9 February 2029.

 


6.       Definitions

 

1)      Unless otherwise stated, words and expressions used in this notice have the same meanings as those in the HVNL and its regulations.

 

2)      In this notice:

 

Specified loads means a load that is:

a)      an aircraft,

b)      a watercraft, and

c)       any other components or equipment associated with those items.

 

Guide means the Tasmania Class 3 Pig Trailer Dimension Exemption Operator’s Guide published by the National Heavy Vehicle Regulator, as amended from time to time.

 

7.       Application

 

1)      This notice applies to a class 3 heavy vehicle that meets all the requirements in this section.

 

2)      This notice applies to a heavy combination consisting of:

 

a)      a truck; and

b)      a pig trailer that is carrying a specified load.

 

3)      This notice applies in Tasmania.

 

4)      A heavy vehicle to which this section applies and that complies with the conditions of this notice is an eligible vehicle.

 

8.       Exemption – Prescribed dimension requirements

 

1)      An eligible vehicle is exempt from the following dimension requirements under Schedule 6 of the Heavy Vehicle (Mass Dimension and Loading) National Regulation (MDL Regulation):

 

a)      section 3 – Length (combination or single vehicle)

b)      section 5 – Length (rear overhang)

 

2)      An exemption in 1) only applies to the extent that specific conditional dimension limits are provided in section 9.

 


9.       Condition – Dimension limits

 

1)      For a parameter given in column 1 of Table 1, an eligible vehicle must not exceed the dimension given in column 2.

 

Table 1: Maximum dimensions

Column 1

Column 2

Parameter

Maximum Dimension (m)

Length (combination or single vehicle)

25.0

Length (rear overhang)

5.0

 

10.   Condition – Multiple specified loads

 

More than one specified load may be carried so long as the carriage of multiple specified loads does not cause another regulatory dimension to be exceeded.

 

11.   Condition - General operating conditions

 

 If a load on an eligible vehicle can be safely loaded in more than one way, it must be loaded in a way that minimises the dimensions of the vehicle.

 

12.   Condition - Pilot vehicle requirements

 

Where a Specified Road Manager Network Requirement in the Guide requires an eligible vehicle to be accompanied by a pilot vehicle, the pilot vehicle must comply with the requirements set out in the Tasmanian Class 1 Heavy Vehicle Pilot and Escort Guidelines.

 

Note: The Tasmanian Class 1 Heavy Vehicle Pilot and Escort Guidelines are maintained and published by the Tasmanian Department of State Growth.

 

13.   Application of Schedule 8 of the MDL Regulation

 

1)      The following conditions in Schedule 8 of the MDL Regulation are applied to eligible vehicles as though they are class 1 vehicles:

 

a)      section 2 - Warning signs and flags

b)      section 5 - Side and rear markers and warning lights for oversize vehicles used at night

c)       section 6 - Headlights

d)      section 8 - No travelling if low visibility

e)      section 9 - Minimum following distance

f)        section 10 - Allowing overtaking

 


14.   Condition – Stated areas or routes

 

1)      An eligible vehicle complying with the conditions of this notice has general access in Tasmania.

 

2)      For the purposes of section 119(1)(a) of the HVNL, an area or route specified in this section is a stated area or route to which this notice applies.

 

3)      In this section general access means access to all roads except as restricted by the Specified Road Manager Network Requirements in the Guide.

 

 

Peter Rouse

Acting Director, Policy Implementation

National Heavy Vehicle Regulator

 

Overview

The Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.2) was enacted to provide exemptions from certain prescribed dimension requirements for a class 3 heavy vehicle that includes a pig trailer carrying specified items such as light aircraft, yachts, rowing boats, or surfboats. This notice was introduced to address the need for flexibility in transporting oversized or irregular loads within Tasmania. It was made under the authority of the Heavy Vehicle National Law (HVNL), specifically section 117, which allows the Regulator to exempt certain categories of heavy vehicles from compliance with mass or dimension requirements, and section 23 of Schedule 1, which empowers the Regulator to amend or repeal instruments. The policy objective is to facilitate the movement of such heavy vehicles while ensuring safety and compliance with other regulatory requirements. This notice revokes and replaces the Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.1) and commences on 16 August 2024, expiring on 9 February 2029. The exemptions apply to eligible vehicles in Tasmania and are subject to specific dimensional limits and conditions outlined in the notice. Eligible vehicles are exempt from certain length requirements but must adhere to maximum dimensions and other conditions, including the use of pilot vehicles and compliance with specific road management network requirements. This notice ensures that heavy vehicles carrying specified loads can operate within Tasmania with the necessary exemptions and conditions to maintain safety and regulatory compliance.

Scope and Application

The Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.2) applies to class 3 heavy vehicles that include a pig trailer carrying specified loads such as aircraft, watercraft, and associated equipment, operating within the jurisdiction of Tasmania. The exemption is granted from certain dimension requirements as outlined in Schedule 6 of the Heavy Vehicle (Mass Dimension and Loading) National Regulation (MDL Regulation), specifically sections 3 and 5, which pertain to the length of the vehicle combination or single vehicle and the length of the rear overhang. This exemption is conditional, with maximum dimension limits set at 25.0 meters for length (combination or single vehicle) and 5.0 meters for length (rear overhang). The exemption also allows for the carriage of multiple specified loads, provided that carrying them does not result in other regulatory dimensions being exceeded, and requires the vehicle to be loaded in a way that minimises dimensions. Additionally, if a pilot vehicle is required, it must comply with the Tasmanian Class 1 Heavy Vehicle Pilot and Escort Guidelines. This notice is effective from 16 August 2024 until 9 February 2029 and applies the conditions in Schedule 8 of the MDL Regulation to eligible vehicles as though they were class 1 vehicles.

Key Provisions

The Tasmania Class 3 Pig Trailer Dimension Exemption Notice 2024 (No.2) provides exemptions from certain prescribed dimension requirements for Class 3 heavy vehicles in Tasmania that are carrying specified loads such as light aircraft, yachts, rowing boats, or surfboats. This notice, which revokes and replaces the previous exemption notice, applies to vehicles that meet specific conditions, including the carriage of multiple specified loads, provided the overall dimensions do not exceed the limits set out in section 9. The notice is made under section 117 of the Heavy Vehicle National Law (HVNL) and section 23 of Schedule 1 of the HVNL. It commences on 16 August 2024 and expires on 9 February 2029. Entities governed by this notice, specifically Class 3 heavy vehicles in Tasmania carrying specified loads, must adhere to the specified dimension limits as outlined in section 9, which includes maximum length and rear overhang dimensions of 25.0 meters and 5.0 meters respectively. Additionally, vehicles must comply with general operating conditions that ensure the load is arranged in a way that minimises the dimensions of the vehicle. If a pilot vehicle is required, it must comply with the Tasmanian Class 1 Heavy Vehicle Pilot and Escort Guidelines. The notice also imposes conditions on the carriage of multiple specified loads, stating that such carriage is permissible only if it does not cause other regulatory dimensions to be exceeded. Eligible vehicles must also adhere to certain conditions in Schedule 8 of the Heavy Vehicle (Mass Dimension and Loading) National Regulation, such as the use of warning signs, flags, side and rear markers, warning lights, headlights, and maintaining a minimum following distance. Failure to comply with the conditions set out in the notice may result in penalties. Although the specific penalties are not detailed in the notice, breaches of the Heavy Vehicle National Law generally carry significant penalties. These can include substantial fines and potential disqualification from driving. Additionally, any operation of an eligible vehicle that does not comply with the dimension limits or other conditions could lead to enforcement actions by the relevant authorities, potentially resulting in additional civil or criminal consequences. The exact penalties would depend on the nature and severity of the breach, as well as any applicable state or federal regulations.

Legal classification tags

Area of Law
Administrative Law
Commercial Law
Instrument
Gazette Notice
Concepts
Definitions & Interpretation
Commencement Provisions
Exemptions & Exclusions
Regulatory Standards
Enforcement Powers

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.