Queensland Class 3 Heavy Vehicle Additional Mass Limits Exemption Notice 2026 (No.1)

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au C2026G00504 In force Gazette

Legislation content

HEAVY VEHICLE NATIONAL LAW

Queensland Class 3 Heavy Vehicle Additional Mass Limits Exemption Notice 2026 (No.1)

  1.        Purpose

 

This notice grants exemptions from mass requirements for class 3 heavy vehicles.

 

  1.        Authorising provision

 

  1.       This notice is made under the following provision of the Heavy Vehicle National Law (HVNL):

 

  1.       Section 117 – Regulator’s power to exempt a category of class 1 or 3 heavy vehicles from compliance with mass or dimension requirements.

 

  1.        Title

 

This notice may be cited as the Queensland Class 3 Heavy Vehicle Additional Mass Limits Exemption Notice 2026 (No.1).

 

  1.        Commencement date

 

This notice commences on 1 August 2026.

 

  1.        Expiry date

 

This notice expires on 31 July 2031.

 

  1.        Definitions

 

  1.       Unless otherwise stated, words and expressions used in this notice have the same meanings as those in the HVNL and its regulations.

 

  1.       In this notice, definitions from the following notices apply:

 

  1.       National Class 2 B-Double Authorisation Notice, as amended from time to time; and
  2.       National Class 2 Road Train Authorisation Notice, as amended from time to time.
  3.        Queensland Class 3 Truck and Dog (exceeding 19m up to 31.5m in length) Mass and Dimension Exemption Notice, as amended from time to time.

 

  1.       In this notice:

 

General access means access to all roads and road-related areas as restricted by the Guide.

 

Guide means the Queensland Class 3 Heavy Vehicle Additional Mass Limits Exemption Notice 2026 (No.1) Operator’s Guide published by the National Heavy Vehicle Regulator, and as amended from time to time.

 

network means a map or stated route, including a list or database, presented electronically or otherwise, that represents the stated areas and stated routes authorised under this notice.

 

Reduced Mass Amount for a heavy vehicle or combination is the amount calculated by subtracting the sum of the mass deduction amounts stated in Table 1A of Schedule 1 in relation to each applicable axle group of the vehicle or combination from the mass of the vehicle or combination determined in Table 1 of Schedule 1.

 

  1.        Application

 

  1.       This notice applies to a class 3 heavy vehicle that meets all the requirements in this section.

 

  1.       This notice applies to a heavy vehicle that is a:

 

  1.       rigid truck; or
  2.       rigid truck towing a trailer; or
  3.        prime mover towing a semitrailer; or
  4.       B-double; or
  5.       Road train.

 

  1.       Despite section 2(b) in a rigid truck and pig trailer configuration only the rigid truck can be eligible for a mass increase.
  2.       This notice applies in Queensland.
  3.       A heavy vehicle to which this section applies and that complies with the conditions of this notice is an eligible vehicle.

 

 

  1.        Exemption – Prescribed mass requirements

 

  1.       An eligible vehicle is exempt from the following mass requirements under Schedule 1 of the Heavy Vehicle (Mass Dimension and Loading) National Regulation (MDL Regulation):

 

  1.       section 2 – Mass limits for a single vehicle or combination
  2.       section 4 – Mass limits for a single axle or axle group
  3.        section 5 – Mass limits relating to axle spacing generally

 

  1.       An exemption in 1) applies to an eligible vehicle only to the extent that specific conditional mass limits are provided in sections 9, 10, 11 of this notice.

 

  1.       To be clear, if this notice provides for more than one mass limit that may apply in the same circumstances the more restrictive mass limit applies.

 

  1.       Regardless of any conditional masses prescribed in this notice an eligible vehicle must not exceed manufacturer mass limits as defined in section 8(8) of the MDL Regulation.

 


  1.        Conditions – Mass limits for a single vehicle or combination

 

  1.       The mass of an eligible vehicle must not be more than the lowest of the following masses —

 

  1.       An eligible vehicle that belongs to a category described below must not exceed the mass stated for that vehicle:

 

  1.       for a complying steer axle vehicle that is neither a B-double nor a road train—44t;
  2.     for a Euro VI vehicle (complying steer axle) that is neither a B-double nor a road train—44.5t;
  3.    for a Euro VI vehicle (single steer axle) that is neither a B-double nor a road train—44t;
  4.    for a Euro VI vehicle (twinsteer) that is a prime mover with a twinsteer axle group towing a tri-axle semitrailer—48t;
  5.     for a prime mover with a twinsteer axle group towing a tri-axle semitrailer—47.5t;
  6.    for a vehicle that is not mentioned in subparagraphs (i) to (v) and that is neither a B-double nor a road train—43.5t;
  7. for a 19 metre long general access B-double – 50.5t

 

  1.       An eligible vehicle must not exceed the mass that is the sum of the mass limits in relation to each of its axle groups and single axles as prescribed in section 10.

 

  1.       Despite sections 1(b) an eligible vehicle cannot exceed the combination mass limits for a single vehicle or combination as follows —

 

  1.       if the reduced mass amount for the vehicle or combination is 55t or less—1t more than the reduced mass amount for the vehicle or combination; or
  2.       if the reduced mass amount for the vehicle or combination is more than 55t—2t more than the reduced mass amount for the vehicle or combination.
  3.        if the reduced mass amount for the vehicle or combination is more than 85t—3t more than the reduced mass amount for the vehicle or combination.
  4.       if the reduced mass amount for the vehicle or combination is more than 120t—4t more than the reduced mass amount for the vehicle or combination.

 

  1.    Conditions – Mass limits for a single axle or axle group

 

On an eligible vehicle, the mass on a single axle or axle group described in column 1 of Table 1 in Schedule 1 must not exceed the mass limit stated in column 2.

 

 

  1.    Condition – Mass limits relating to axle spacing generally

 

  1.       The mass of an eligible vehicle listed below may exceed the mass limits relating to an axle spacing value corresponding to Column 2 of the relevant axle spacing mass limit table in Schedule 1 by the sum of each axle group reduced mass amount in Table 1A of Schedule 1:

 

  1.       For an eligible vehicle that is not a B-double or a road train — Table 2
  2.       For an eligible vehicle that is a B -double not exceeding 19.0m in length— Table 2A
  3.        For an eligible vehicle that is a B -double greater than 19.0m in length— Table 3
  4.       For an eligible vehicle that is Truck and Dog combination (exceeding 19m up to 31.5m in length — Table 4.
  5.       For an eligible vehicle that is a road train— Table 4.

 

 

  1.       If the axle spacing includes a steer axle described in 11(2)(a), (b) or (c) the calculated axle spacing mass limit in Section 11(1) is increased by the amount prescribed in 11(2)(a), (b) or (c):

 

  1.       for a complying steer axle vehicle, or Euro VI vehicle (single steer axle), for which the steer axle is used to calculate the axle spacing— 0.5t.
  2.       for a Euro VI vehicle (twinsteer) for which the twinsteer axle group is used to calculate the axle spacing— 0.5t.
  3.        for a Euro VI vehicle (complying steer axle) for which the steer axle is used to calculate the axle spacing— 1.0t.

 

  1.    Condition – stated areas and routes

 

  1.       Pursuant to section 119(1)(a) of the HVNL this notice applies to an area or route stated in this section.

 

  1.       An eligible vehicle that belongs to one of the following categories may access all roads and road-related areas except as restricted in the Guide:

 

  1.       A rigid vehicle;
  2.       A rigid vehicle towing a trailer;
  3.        A prime mover towing a semitrailer;
  4.       A 19 metre long general access B-double;

 

  1.       An eligible vehicle described in column 1 of Table 1 - Stated areas and routes for categories of eligible vehicles may operate on the networks stated in column 2, as published by the Regulator pursuant to s119(2) of the HVNL.

Table 1 – Stated areas and routes for categories of eligible vehicles

Column 1

Column 2

Category of vehicle

Stated area or route

B-double up to 23.0m in length

23 metre B-double Route

B-double up to 26.0 m in length

25/26 metre B-double Route and PBS 2A Route

Truck and Dog (exceeding 19m up to 31.5m in length)

RT1 route (Road Train Type 1 network)

Type 1 Road Train, up to 36.5m in length

RT1 route (Road Train Type 1 network)

Type 2 Road Train, up to 53.5m in length

RT2 route (Road Train Type 2 network)

 

  1.       In this section, network means a stated map or list pursuant to s119(2) of the HVNL.
  2.       Regardless of any access granted under this section, an eligible vehicle must comply with any conditions or restrictions applied to a given area or route by the Specified Road Manager Network Requirements in the Guide.

 

  1.       An eligible vehicle operating on an area or route specified in a schedule must comply with any of the following conditions prescribed for that area or route:

 

  1.       Road conditions pursuant to section 160 of the HVNL; and
  2.       Travel conditions pursuant to section 161 of the HVNL; and
  3.        Vehicle conditions pursuant to section 162 of the HVNL.

 

 

Jose Arredondo
Manager Network Access Policy
National Heavy Vehicle Regulator

 


Schedule 1 - Axle mass tables

Table 1 – Axle mass limits table

Pursuant to section 10 of the notice

Column 1

Column 2

Description of single axle or axle group

Mass limit (t)

Single axles and single axle groups

 

Steer axles on—

 

(a)  a hauling unit or prime mover forming part of a road train fitted with tyres with section widths of—

 

  (i)  at least 295mm

6.5

  (ii)  at least 375mm

7.1

(b)  Euro VI vehicle (complying steer axle)

7.0

(c)  Euro VI vehicle (single steer axle)

6.5

(d)  another motor vehicle

6.25

Single axle or single axle group fitted with single tyres with section widths of—

 

(a)  less than 375mm

6.0

(b)  at least 375mm but less than 450mm

6.7

(c)  at least 450mm

7.0

Single axle or single axle group fitted with dual tyres on—

 

(a)    a pig trailer

8.5

(b)  another vehicle

9.5

Tandem axle group

 

Tandem axle group fitted with single tyres with section widths of—

 

(a)  less than 375mm

11.5

(b)  at least 375mm but less than 450mm

13.8

(c)  at least 450mm

14.5

Tandem axle group fitted with single tyres on 1 axle and dual tyres on the other axle on—

 

(a)  another motor vehicle

13.5

Tandem axle group fitted with dual tyres on—

 

(a) a pig trailer

15.0

(b)  another vehicle

17.0

Twinsteer axle groups

 

Twinsteer axle group without a load-sharing suspension system

10.0

Twinsteer axle group with a load-sharing suspension system

12.0

Euro VI vehicle (twinsteer)

11.5

Tri-axle groups

 

Tri-axle group on a vehicle fitted with—

(a)  single tyres with section widths of less than 375mm on all axles; or

(b)  single tyres with section widths of less than 375mm on some axles and dual tyres on the other axles

15.5

Tri-axle group on a pig trailer fitted with—

(a)  single tyres with section widths of at least 375mm on all axles; or

(b)  dual tyres on all axles; or

(c)  single tyres with section widths of at least 375mm on some axles and dual tyres on the other axles

18.0

Tri-axle group on a vehicle other than a pig trailer fitted with—

(a)  single tyres with section widths of at least 375mm on all axles; or

(b)  dual tyres on all axles; or

(c)  single tyres with section widths of at least 375mm on some axles and dual tyres on the other axles

21.0

Quad-axle groups

 

Quad-axle group fitted with single tyres with section widths of less than 375mm

15.0

Quad-axle group fitted with single tyres with section widths of at least 375mm or dual tyres

20.0

Axle groups of 5 or more

 

Rear group of 5 or more axles on a low loader fitted with single tyres with section widths of less than 375mm

15.0

Any other rear group of 5 or more axles on a low loader

20.0

 


Table 1A – Reduced mass amount table

Pursuant to section 9 of the notice

 

Column 1

Column 2

Description of single axle or axle group

Reduced Mass amount (t)

Single axles and single axle groups

 

Steer axles on—

 

(a)  a hauling unit or prime mover forming part of a road train fitted with tyres with section widths of—

 

  (i)  at least 295mm

0

  (ii)  at least 375mm

0

(b)  Euro VI vehicle (complying steer axle)

0

(c)  Euro VI vehicle (single steer axle)

0

(d)  another motor vehicle

0.25

Single axle or single axle group fitted with single tyres with section widths of—

 

(a)  less than 375mm

0

(b)  at least 375mm but less than 450mm

0

(c)  at least 450mm

0

Single axle or single axle group fitted with dual tyres on—

 

(a)    a pig trailer

0

(b)  another vehicle

0.5

Tandem axle group

 

Tandem axle group fitted with single tyres with section widths of—

 

(a)  less than 375mm

0.5

(b)  at least 375mm but less than 450mm

0.5

(c)  at least 450mm

0.5

Tandem axle group fitted with single tyres on 1 axle and dual tyres on the other axle on—

 

(a)  another motor vehicle

0.5

Tandem axle group fitted with dual tyres on—

 

(a) pig trailer

0

(b)  another vehicle

0.5

Twinsteer axle groups

 

Twinsteer axle group without a load-sharing suspension system

0

Twinsteer axle group with a load-sharing suspension system

1.0

Euro VI vehicle (twinsteer)

0

Tri-axle groups

 

Tri-axle group on a vehicle fitted with—

(a)  single tyres with section widths of less than 375mm on all axles; or

(b)  single tyres with section widths of less than 375mm on some axles and dual tyres on the other axles

0.5

Tri-axle group on a pig trailer fitted with—

(a)  single tyres with section widths of at least 375mm on all axles; or

(b)  dual tyres on all axles; or

(c)  single tyres with section widths of at least 375mm on some axles and dual tyres on the other axles

0

Tri-axle group on a vehicle other than a pig trailer fitted with—

(a)  single tyres with section widths of at least 375mm on all axles; or

(b)  dual tyres on all axles; or

(c)  single tyres with section widths of at least 375mm on some axles and dual tyres on the other axles

1.0

Quad-axle groups

 

Quad-axle group fitted with single tyres with section widths of less than 375mm

0

Quad-axle group fitted with single tyres with section widths of at least 375mm or dual tyres

0

Axle groups of 5 or more 

 

Rear group of 5 or more axles on a low loader fitted with single tyres with section widths of less than 375mm

0

Any other rear group of 5 or more axles on a low loader

0

 


Table 2 – Axle spacing mass limits general table (not B-doubles or road trains)

Pursuant to section 11(1) of the notice

Column 1

Column 2

Length of axle spacing (m)

Mass limit (t)

at least

less than

0

2.5

15

2.5

3.7

23

3.7

3.8

23.5

3.8

4

24

4

4.2

24.5

4.2

4.3

25

4.3

4.5

25.5

4.5

4.7

26

4.7

4.8

26.5

4.8

5

27

5

5.2

27.5

5.2

5.3

28

5.3

5.5

28.5

5.5

5.7

29

5.7

5.8

29.5

5.8

6

30

6

6.2

30.5

6.2

6.3

31

6.3

6.5

31.5

6.5

6.7

32

6.7

6.8

32.5

6.8

7

33

7

7.2

33.5

7.2

7.3

34

7.3

7.5

34.5

7.5

7.7

35

7.7

7.8

35.5

7.8

8

36

8

8.2

36.5

8.2

8.3

37

8.3

8.5

37.5

8.5

8.7

38

8.7

8.8

38.5

8.8

9

39

9

9.2

39.5

9.2

9.3

40

9.3

9.5

40.5

9.5

9.7

41

9.7

9.8

41.5

9.8

10

42

10

10.5

42.5

10.5

11

43

11

11.5

43.5

11.5

12

44

12

12.5

44.5

12.5

13

45

13

13.5

45.5

13.5

14

46

14

46.5

 


Table 2A – Axle spacing mass limits B-Doubles up to 19.0m in length table

Pursuant to section 11(2) of the notice

Column 1

Column 2

Length of axle spacing (m)

Mass limit (t)

at least

less than

3.5

3.7

23

3.7

3.8

23.5

3.8

4

24

4

4.2

24.5

4.2

4.3

25

4.3

4.5

25.5

4.5

4.7

26

4.7

4.8

26.5

4.8

5

27

5

5.2

27.5

5.2

5.3

28

5.3

5.5

28.5

5.5

5.7

29

5.7

5.8

29.5

5.8

6

30

6

6.2

30.5

6.2

6.3

31

6.3

6.5

31.5

6.5

6.7

32

6.7

6.8

32.5

6.8

7

33

7

7.2

33.5

7.2

7.3

34

7.3

7.5

34.5

7.5

7.7

35

7.7

7.8

35.5

7.8

8

36

8

8.2

36.5

8.2

8.3

37

8.3

8.5

37.5

8.5

8.7

38

8.7

8.8

38.5

8.8

9

39

9

9.2

39.5

9.2

9.3

40

9.3

9.5

40.5

9.5

9.7

41

9.7

9.8

41.5

9.8

10

42

10

10.5

42.5

10.5

11

43

11

11.5

43.5

11.5

12

44

12

12.5

44.5

12.5

13

45

13

13.5

45.5

13.5

14

46

14

14.5

46.5

14.5

15

47

15

15.5

47.5

15.5

16

48

16

16.5

48.5

16.5

17

49

17

17.5

49.5

17.5

--

50

 


Table 3 – Axle spacing mass limits B-double table

Pursuant to section 11(3) of the notice

Column 1

Column 2

Length of axle spacing (m)

Mass limit (t)

at least

less than

0

2.5

15

2.5

3.7

23

3.7

3.8

23.5

3.8

4

24

4

4.2

24.5

4.2

4.3

25

4.3

4.5

25.5

4.5

4.7

26

4.7

4.8

26.5

4.8

5

27

5

5.2

27.5

5.2

5.3

28

5.3

5.5

28.5

5.5

5.7

29

5.7

5.8

29.5

5.8

6

30

6

6.2

30.5

6.2

6.3

31

6.3

6.5

31.5

6.5

6.7

32

6.7

6.8

32.5

6.8

7

33

7

7.2

33.5

7.2

7.3

34

7.3

7.5

34.5

7.5

7.7

35

7.7

7.8

35.5

7.8

8

36

8

8.2

36.5

8.2

8.3

37

8.3

8.5

37.5

8.5

8.7

38

8.7

8.8

38.5

8.8

9

39

9

9.2

39.5

9.2

9.3

40

9.3

9.5

40.5

9.5

9.7

41

9.7

9.8

41.5

9.8

10

42

10

10.2

42.5

10.2

10.3

43

10.3

10.5

43.5

10.5

10.7

44

10.7

10.8

44.5

10.8

11

45

11

11.2

45.5

11.2

11.3

46

11.3

11.7

46.5

11.7

12

47

12

12.3

47.5

12.3

12.7

48

12.7

13

48.5

13

13.3

49

13.3

13.7

49.5

13.7

14

50

14

14.3

50.5

14.3

14.7

51

14.7

15

51.5

15

15.3

52

15.3

15.7

52.5

15.7

16

53

16

16.3

53.5

16.3

16.7

54

16.7

17

54.5

17

17.3

55

17.3

17.7

55.5

17.7

18

56

18

18.3

56.5

18.3

18.7

57

18.7

19

57.5

19

19.3

58

19.3

19.7

58.5

19.7

20

59

20

20.3

59.5

20.3

20.7

60

20.7

21

60.5

21

62.5

 


Table 4 – Axle spacing mass limits Road Train table

Pursuant to section 11 (4) of the notice

Column 1

Column 2

Length of axle spacing (m)

Mass limit (t)

at least

less than

0

2.5

15

2.5

3.7

23

3.7

3.8

23.5

3.8

4

24

4

4.2

24.5

4.2

4.3

25

4.3

4.5

25.5

4.5

4.7

26

4.7

4.8

26.5

4.8

5

27

5

5.2

27.5

5.2

5.3

28

5.3

5.5

28.5

5.5

5.7

29

5.7

5.8

29.5

5.8

6

30

6

6.2

30.5

6.2

6.3

31

6.3

6.5

31.5

6.5

6.7

32

6.7

6.8

32.5

6.8

7

33

7

7.2

33.5

7.2

7.3

34

7.3

7.5

34.5

7.5

7.7

35

7.7

7.8

35.5

7.8

8

36

8

8.2

36.5

8.2

8.3

37

8.3

8.5

37.5

8.5

8.7

38

8.7

8.8

38.5

8.8

9

39

9

9.2

39.5

9.2

9.3

40

9.3

9.5

40.5

9.5

9.7

41

9.7

9.8

41.5

9.8

10

42

10

10.2

42.5

10.2

10.3

43

10.3

10.5

43.5

10.5

10.7

44

10.7

10.8

44.5

10.8

11

45

11

11.2

45.5

11.2

11.3

46

11.3

11.5

46.5

11.5

11.7

47

11.7

11.8

47.5

11.8

12

48

12

12.2

48.5

12.2

12.3

49

12.3

12.5

49.5

12.5

12.7

50

12.7

12.8

50.5

12.8

13

51

13

13.2

51.5

13.2

13.3

52

13.3

13.5

52.5

13.5

13.7

53

13.7

13.8

53.5

13.8

14

54

14

14.2

54.5

14.2

14.3

55

14.3

14.5

55.5

14.5

14.7

56

14.7

14.8

56.5

14.8

15

57

15

15.2

57.5

15.2

15.3

58

15.3

15.5

58.5

15.5

15.7

59

15.7

15.8

59.5

15.8

16

60

16

16.2

60.5

16.2

16.3

61

16.3

16.5

61.5

16.5

16.7

62

16.7

16.8

62.5

16.8

17

63

17

17.2

63.5

17.2

17.3

64

17.3

17.5

64.5

17.5

17.7

65

17.7

17.8

65.5

17.8

18

66

18

18.2

66.5

18.2

18.3

67

18.3

18.5

67.5

18.5

18.7

68

18.7

18.8

68.5

18.8

19

69

19

19.2

69.5

19.2

19.3

70

19.3

19.5

70.5

19.5

19.7

71

19.7

19.8

71.5

19.8

20

72

20

20.2

72.5

20.2

20.3

73

20.3

20.5

73.5

20.5

20.7

74

20.7

20.8

74.5

20.8

21

75

21

21.2

75.5

21.2

21.3

76

21.3

21.5

76.5

21.5

21.7

77

21.7

21.8

77.5

21.8

22

78

22

22.2

78.5

22.2

22.3

79

22.3

22.5

79.5

22.5

22.7

80

22.7

22.8

80.5

22.8

23

81

23

23.2

81.5

23.2

23.3

82

23.3

23.5

82.5

23.5

23.7

83

23.7

23.8

83.5

23.8

24

84

24

24.2

84.5

24.2

24.3

85

24.3

24.5

85.5

24.5

24.7

86

24.7

24.8

86.5

24.8

25

87

25

25.2

87.5

25.2

25.3

88

25.3

25.5

88.5

25.5

25.7

89

25.7

25.8

89.5

25.8

26

90

26

26.2

90.5

26.2

26.3

91

26.3

26.5

91.5

26.5

26.7

92

26.7

26.8

92.5

26.8

27

93

27

27.2

93.5

27.2

27.3

94

27.3

27.5

94.5

27.5

27.7

95

27.7

27.8

95.5

27.8

28

96

28

28.2

96.5

28.2

28.3

97

28.3

28.5

97.5

28.5

28.7

98

28.7

28.8

98.5

28.8

29

99

29

29.2

99.5

29.2

29.3

100

29.3

29.5

100.5

29.5

29.7

101

29.7

29.8

101.5

29.8

30

102

30

30.2

102.5

30.2

30.3

103

30.3

30.5

103.5

30.5

30.7

104

30.7

30.8

104.5

30.8

31

105

31

31.2

105.5

31.2

31.3

106

31.3

31.5

106.5

31.5

31.7

107

31.7

31.8

107.5

31.8

32

108

32

32.2

108.5

32.2

32.3

109

32.3

32.5

109.5

32.5

32.7

110

32.7

32.8

110.5

32.8

33

111

33

33.2

111.5

33.2

33.3

112

33.3

33.5

112.5

33.5

33.7

113

33.7

33.8

113.5

33.8

34

114

34

34.2

114.5

34.2

34.3

115

34.3

34.5

115.5

34.5

34.7

116

34.7

34.8

116.5

34.8

35

117

35

35.2

117.5

35.2

35.3

118

35.3

35.5

118.5

35.5

35.7

119

35.7

35.8

119.5

35.8

36

120

36

36.2

120.5

36.2

36.3

121

36.3

36.5

121.5

36.5

36.7

122

36.7

36.8

122.5

36.8

37

123

37

37.2

123.5

37.2

37.3

124

37.3

37.5

124.5

37.5

37.7

125

37.7

37.8

125.5

37.8

38

126

38

38.2

126.5

38.2

38.3

127

38.3

38.5

127.5

38.5

38.7

128

38.7

38.8

128.5

38.8

39

129

39

39.2

129.5

39.2

39.3

130

39.3

39.5

130.5

39.5

39.7

131

39.7

39.8

131.5

39.8

40

132

40

40.2

132.5

40.2

40.3

133

40.3

40.5

133.5

40.5

40.7

134

40.7

40.8

134.5

40.8

41

135

41

41.2

135.5

41.2

41.3

136

41.3

41.5

136.5

41.5

41.7

137

41.7

41.8

137.5

41.8

42

138

42

42.2

138.5

42.2

42.3

139

42.3

42.5

139.5

42.5

42.7

140

42.7

42.8

140.5

42.8

43

141

43

43.2

141.5

43.2

43.3

142

43.3

43.5

142.5

43.5

43.7

143

43.7

43.8

143.5

43.8

44

144

44

44.2

144.5

44.2

44.3

145

44.3

44.5

145.5

44.5

44.7

146

44.7

44.8

146.5

44.8

45

147

45

45.2

147.5

45.2

45.3

148

45.3

45.5

148.5

45.5

45.7

149

45.7

45.8

149.5

45.8

46

150

46

46.2

150.5

46.2

46.3

151

46.3

46.5

151.5

46.5

46.7

152

46.7

46.8

152.5

46.8

47

153

47

47.2

153.5

47.2

47.3

154

47.3

47.5

154.5

47.5

47.7

155

47.7

47.8

155.5

47.8

48

156

48

48.2

156.5

48.2

48.3

157

48.3

48.5

157.5

48.5

48.7

158

48.7

48.8

158.5

48.8

49

159

49

49.2

159.5

49.2

49.3

160

49.3

49.5

160.5

49.5

49.7

161

49.7

49.8

161.5

49.8

50

162

50

50.2

162.5

50.2

50.3

163

50.3

50.5

163.5

50.5

50.7

164

50.7

50.8

164.5

50.8

51

165

51

51.2

165.5

51.2

51.3

166

51.3

51.5

166.5

51.5

51.7

167

51.7

51.8

167.5

51.8

52

168

52

52.2

168.5

52.2

52.3

169

52.3

52.5

169.5

52.5

52.7

170

52.7

52.8

170.5

52.8

53

171

53

53.2

171.5

53.2

53.3

172

53.3

172.5

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.