National Health Security (SSBA Standards) Determination 2009

Administered by Department of Health, Disability and Ageing

Legislation au F2009L04656 Not in force Legislative Instrument

Legislation content

 

EXPLANATORY STATEMENT

 

Issued by the Minister for Health and Ageing

 

National Health Security Act 2007

 

National Health Security (SSBA Standards) Determination 2009

 

Subsection 35(1) of the National Health Security Act 2007 (the NHS Act) provides that the Minister may, by legislative instrument, determine standards (SSBA Standards) relating to security-sensitive biological agents (SSBAs). 

A standard may set out requirements relating to SSBAs including their storage, the security status of individuals who handle or dispose of SSBAs and the transport of SSBAs.  Section 56 of the NHS Act requires entities that handle SSBAs to comply with the SSBA Standards.  

Background

The National Health Security (SSBA Standards) Determination 2008 (the 2008 Determination) was made by the Minister for Health and Ageing under section 35 of the National Health Security Act 2007 (NHS Act) and was entered on the Federal Register of Legislative Instruments on 24 November 2008.  The 2008 Determination determined the document entitled “Security-sensitive Biological Agent (SSBA) Standards”, dated 30 September 2008 as constituting the SSBA Standards. Following the commencement of the SSBA regulatory scheme in January 2009 and the receipt of feedback from the regulated community, the standards document referred to in the 2008 Determination has been revised to improve clarity and to provide requirements about agents that are suspected to be SSBAs.

During the implementation of the SSBA regulatory scheme, it was determined that changes, requiring amendments to the NHS Act, were needed.  These changes were included in the National Health Security Amendment Bill 2009 (NHS Bill).  The NHS Bill was passed during the 2009 spring sittings of Parliament and received Royal Assent on 7 October 2009.

One of these amendments in the NHS Bill is that the Minister is to be permitted to determine standards about the handling of biological agents that are suspected of being SSBAs.  The amendments allow these standards to set out requirements about the storage, access, disposal and transport of these agents while awaiting confirmatory testing results. 

The purpose of the National Health Security (SSBA Standards) Determination 2009 (the 2009 Determination) is to revoke and replace the 2008 Determination to take account of revised and new requirements in the SSBA Standards consequential to changes in the National Health Security Amendment Act 2009.  The 2009 Determination incorporates, by reference, the document referred to as the Security-sensitive Biological Agent (SSBA) Standards dated 1 October 2009, published by the Commonwealth and which can be found on the Department’s website http://www.health.gov.au/ssba.  

The SSBA Standards set out minimum requirements relating to physical security, information management, decontamination and inactivation, disposal and transport of SSBAs, and the security status of individuals handling confirmed SSBAs.  They include specific directions for dealing with biosecurity risks and establish a systematic approach to the management of the

 

security of SSBA.  The SSBA Standards are comprised of normative requirements that are mandatory and informative statements to assist in meeting the normative statements. 

The Minister has established a list of biological agents under Part 3 of the National Health Security Act 2007 that she considers to be of security concern to Australia.  This list is the List of Security-sensitive Biological Agents (the List of SSBA).  The inclusion of agents on the List is derived from the Council of Australian Governments (COAG) Report on the Regulation and Control of Biological Agents, which developed the COAG Biological Agents list (the COAG list) in November 2006.  Tier 1 agents pose the greatest risk to Australia, while Tier 2 agents are rated less likely to pose a security risk.  Tier 1 SSBAs have been regulated since 31 January 2009 and Tier 2 SSBAs will be regulated from January 2010.

The SSBA Standards contain differing requirements for Tier 1 and Tier 2 SSBAs.  This is to reflect the security concerns surrounding each tier, with Tier 1 SSBAs having greater security requirements than Tier 2 SSBAs.

In addition to the requirements for handling confirmed SSBAs, the SSBA Standards also set out the requirements for handling biological agents that are suspected of being SSBAs.  Entities that have a suspected SSBA must either destroy the agent or transfer a sample for confirmatory testing within two business days of the initial suspicion of the agent being an SSBA.  Entities that form the initial suspicion are referred to as the initial tester.

Compliance with the suspected SSBA Standards begins when the initial tester forms a reasonable suspicion, on the basis of testing in the laboratory, that the biological agent is an SSBA.  The entity must then undertake confirmatory testing, either in-house if possible or by sending the agent to a facility able to undertake these tests.  Compliance with the suspected SSBA Standards will end when the initial tester receives the results of the confirmatory test or upon the complete destruction of the agent if confirmatory testing is not undertaken.

Part 9 of the SSBA Standards sets out the handling requirements for suspected SSBAs.  These include restriction of access, storage, transport, destruction, waste disposal and record keeping requirements for suspected SSBAs.  If an agent is subsequently confirmed as an SSBA, entities will then need to comply with the requirements of the Act, Regulations and Standards for confirmed SSBAs.

 

Consultation

Subsection 35(4) provides that certain persons must be consulted prior to the Minister determining a standard.  Those persons are persons with scientific or technical knowledge in relation to security concerns about biological agents.  The States, the Australian Capital Territory and the Northern Territory are also required to be consulted. 

Subsection 35(5) provides that subsection 35(4) does not prevent the Minister from consulting any other person who the Minister considers may assist the Minister in developing a standard.

Consultations have occurred with persons with scientific or technical knowledge of SSBAs who are members of the Department’s advisory group: the Implementation Advisory and Consultative Committee (IACC). 

The IACC is a committee chaired by the Department to provide advice on implementation of the regulatory scheme and comprises representatives of 12 government agencies including the Australian Chemical, Biological, Radiological and Nuclear Data Centre and the Australian Security Intelligence Organisation. 

Consultations have also occurred with the National Counter Terrorism Committee’s Chemical, Biological, Radiological and Nuclear (CBRN) Security Sub-Committee, which includes representatives of each State and the ACT and NT as well as representatives from the emergency services. 

Draft Standards were released for public consultation on 3 August 2009 and placed on the Department of Health and Ageing website (http://www.health.gov.au/ssba).

Over 120 comments from 16 individuals or organisations were received during the consultation period. 

Road shows for the SSBA Regulatory Scheme were conducted in all Australian capital cities in July and August 2009 and included an invitation to comment on the proposed changes to the SSBA Standards.

The Office of Best Practice Regulation (OBPR) advised that the revision of the SSBA Standards and the incorporation of new standards for handling suspected SSBAs would not require a Regulation Impact Statement (RIS) or a Business Cost Calculator (BCC). 

Details of the 2009 Determination are set out in the Attachment.

 

The 2009 Determination is a legislative instrument for the purposes of the Legislative Instruments Act 2003.


ATTACHMENT

DETAILS OF THE NATIONAL HEALTH SECURITY (SSBA STANDARDS) 2009

1. Name of Determination

 

This section provides that this Determination is the National Health Security (SSBA Standards) Determination 2009.

2. Commencement

 

This section provides that this Determination commences on 31 January 2010.

3. Definition

 

This section sets out definitions of terms used in the Determination.

4. Determination

 

The effect of section 4 is to incorporate, by reference, the requirements set out in the SBBA Standards document dated 1 October 2009.

5. Revocation

 

This section revokes the National Health Security (SBBA Standards) Determination 2008.

Overview

The National Health Security (SSBA Standards) Determination 2009 was enacted to address the need for updated and revised standards for the management of security-sensitive biological agents (SSBAs) in Australia, as required by the National Health Security Act 2007. The determination was made by the Minister for Health and Ageing under section 35 of the Act and aims to replace the previous standards set out in the 2008 Determination with a revised document, the Security-sensitive Biological Agent (SSBA) Standards dated 1 October 2009. This new determination takes into account the feedback from the regulated community and incorporates new requirements for handling suspected SSBAs. The purpose of the SSBA Standards is to establish minimum requirements relating to the physical security, information management, decontamination and inactivation, disposal, and transport of SSBAs, as well as the security status of individuals handling confirmed SSBAs. The standards also include specific directions for dealing with biosecurity risks and establish a systematic approach to the management of the security of SSBA. The determination is a legislative instrument for the purposes of the Legislative Instruments Act 2003. The National Health Security (SSBA Standards) Determination 2009 was enacted by the Minister for Health and Ageing under section 35 of the National Health Security Act 2007. The determination aims to ensure that entities handling SSBAs comply with the updated SSBA Standards, which set out requirements for the storage, access, disposal, and transport of SSBAs while awaiting confirmatory testing results. The policy objective of the determination is to provide a clear and systematic approach to the management of the security of SSBAs in Australia, taking into account the feedback from the regulated community and incorporating new requirements for handling suspected SSBAs. The determination also reflects the differing security concerns surrounding Tier 1 and Tier 2 SSBAs, with Tier 1 SSBAs having greater security requirements than Tier 2 SSBAs. The determination is a legislative instrument for the purposes of the Legislative Instruments Act 2003.

Scope and Application

The National Health Security (SSBA Standards) Determination 2009 applies to entities handling security-sensitive biological agents (SSBAs) across Australia, ensuring compliance with stringent standards for the management, storage, and transport of these agents. These standards are applicable to both confirmed and suspected SSBAs, with distinct requirements for each category. The scope of the act includes the setting of mandatory security protocols, such as restricted access, controlled storage, and specific disposal procedures, to mitigate potential biosecurity risks. The Act's jurisdiction is national, encompassing the entire Commonwealth of Australia, including all states and territories. However, the Act does not apply to entities that handle biological agents that are not classified as SSBAs. The Minister for Health and Ageing has the authority to amend the SSBA Standards through subordinate instruments to adapt to evolving security threats and technological advancements. The 2009 Determination replaces the 2008 Determination to reflect the updated requirements and to streamline the regulatory framework for handling suspected SSBAs.

Key Provisions

The National Health Security (SSBA Standards) Determination 2009 (the 2009 Determination) serves as a legislative instrument under the National Health Security Act 2007 (NHS Act) and is designed to set out the standards for the management of security-sensitive biological agents (SSBAs) in Australia. Specifically, section 4 of the 2009 Determination incorporates by reference the document titled "Security-sensitive Biological Agent (SSBA) Standards" dated 1 October 2009. This document outlines the mandatory requirements for the physical security, information management, decontamination, disposal, transport, and the security status of individuals handling SSBAs. The SSBA Standards also include provisions for the handling of biological agents that are suspected to be SSBAs, mandating either their destruction or transfer for confirmatory testing within two business days of suspicion. Entities that handle SSBAs are obligated to comply with these SSBA Standards as required under section 56 of the NHS Act. These obligations include maintaining stringent security protocols, such as restricted access to SSBAs, secure storage and transport, proper decontamination and disposal methods, and thorough record-keeping. Furthermore, entities must ensure that individuals handling SSBAs meet specific security status requirements. For suspected SSBAs, entities must initiate confirmatory testing and follow the outlined procedures until the agent is either destroyed or confirmed as an SSBA. Compliance with the SSBA Standards is critical for mitigating biosecurity risks and ensuring the safe and secure handling of these agents. Breaches of the SSBA Standards can result in significant legal consequences. While the 2009 Determination does not explicitly detail specific offences or penalties, violations of the SSBA Standards may lead to enforcement actions under the NHS Act. Such actions can include fines, imprisonment, or other penalties as prescribed by the relevant legislation. For instance, under section 111 of the NHS Act, unauthorised handling of SSBAs can attract a penalty of up to 10,000 penalty units or imprisonment for up to five years, or both. Additionally, entities may face civil liabilities for any harm caused by non-compliance with the SSBA Standards. It is important for entities to adhere strictly to the standards to avoid these potential repercussions.

Legal classification tags

Area of Law
National Security Law
Health Law
Instrument
Legislative Instrument
Concepts
Definitions & Interpretation
Regulatory Standards
Compliance Obligations
Prohibited Conduct

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.