EXPLANATORY STATEMENT
Issued by the Australian Communications and Media Authority
Variation to Licence Area Plan for Maryborough Radio – No.1 of 2011
Broadcasting Services Act 1992
In accordance with the Australian Communications and Media Authority Act 2005, since 1 July 2005 the Australian Communications and Media Authority (ACMA) has exercised powers and functions under the Broadcasting Services Act 1992 (BSA) previously exercised by the Australian Broadcasting Authority (ABA).
The ACMA has made a variation to the licence area plan (LAP) for Maryborough radio. The variation was made under subsection 26(2) of the BSA and is referred to in this explanatory statement as “the instrument”.
The LAP and variations
The ACMA prepares LAPs under subsection 26(1) of the BSA. LAPs determine the number and characteristics, including technical specifications, of broadcasting services that are to be available in particular areas of Australia with the use of the broadcasting services bands.
The ACMA may, by legislative instrument, vary LAPs under subsection 26(2) of the BSA.
The ABA made the Licence Area Plan for Maryborough Radio on 5 February 1998 and varied it on 12 September 2001. It is referred to in this explanatory statement as “the Maryborough LAP”.
Intended impact and effect
The instrument varies the characteristics, including technical specifications, of broadcasting services in the Maryborough area by:
> making the FM frequency 107.1 MHz with a maximum effective radiated power (ERP) of 50 watts with an omni-directional antenna pattern available at Tiaro for a new community radio broadcasting service;
> determining the new Tiaro RA1 licence area using 2006 census data; and
> varying the technical specification of the existing community radio broadcasting service 4WBR at Maryborough to change the transmission site and radiation pattern. This service will now operate on: 105.1 MHz from Broadcast Site Scrub Hill NIKENBAH with a maximum ERP of 10 kW with a directional radiation pattern.
The instrument also deletes some material, included for reference only that does not form part of the LAP and which may create confusion, and also makes some minor amendments to revise the drafting of the Maryborough LAP. The instrument also updates each of the licence area definitions so that they are defined in terms of the Australian Bureau of Statistics (ABS) 2006 census data.
The intended impact and effect of this variation is to clarify the characteristics, including technical specifications, of radio broadcasting services in the Maryborough area. The ACMA does not intend the variation to alter any existing rights and obligations, except as set out above.
Regulatory impact analysis
The ACMA’s Best Practice Coordinator has considered the matter and referred it to the Office of Best Practice Regulation (OBPR). The OBPR formed the opinion that the proposed regulation is likely to have no or low impact on business or the economy; and neither a regulation impact statement nor a business cost calculator report is necessary in relation to the regulatory proposal. The OBPR has issued an exemption reference number 2011/12204.
Consultation and submissions
Before making a decision to vary the Maryborough LAP, the ACMA undertook the following consultation:
On 19 October 2010, the ACMA published the following papers on its web-site:
> a draft variation to the Maryborough LAP, a draft variation to the frequency allotment plan and draft licence area designation;
> an explanatory paper outlining the changes proposed in the draft variation to the Bourke, Cairns and Maryborough LAPs, inviting public comment by 29 October 2010; and
> a media release announcing the proposed draft variation to the Bourke, Cairns and Maryborough LAPs.
On 20 October 2010, the ACMA wrote to providers of national, commercial, community and high power open narrowcasting radio broadcasting services in the Maryborough region to advise them of the release of the draft variation to the Maryborough LAP and to invite their comments.
On 20 October 2010, the ACMA placed an advertisement in the “Maryborough Herald” newspaper outlining the effect of the draft variation to the Maryborough LAP, providing details of how to obtain copies of the draft variation, how to access it on the ACMA’s web-site, and inviting public comment.
The ACMA received three submissions on the draft variation to the Maryborough LAP and accompanying explanatory paper.
Description of the provisions of the instrument
Clause (1)
Clause (1) identifies the power under which the ACMA makes the instrument, subsection 26(2) of the BSA.
Clause (2)
Clause (2) names the instrument the Variation to the Licence Area Plan for Maryborough Radio – No. 1 of 2011.
Clause (3)
Clause (3) provides that the instrument commences the day after it is registered on the Federal Register of Legislative Instruments.
Clause (4)(a)
Clause (4)(a) instrument numbers each of the clauses of the Maryborough LAP consecutively as clauses (1), (2) and (3).
Clause (4)(b)
Clause (4)(b) of the instrument omits the words “Maryborough area” and replaces them with “Hervey Bay area” . The change provides a corrected name to a licence area but does not signify a change in its location.
Clause (4)(c)
Clause (4)(c) of the instrument inserts a new clause (4) after clause (3) of the Maryborough LAP to reflect the addition of a new community radio broadcasting service which is to be provided in the new Tiaro RA1 licence area (described further at clause (4)(i) below).
Clause (4)(c) of the instrument also inserts a new clause (5) into the Maryborough LAP the effect of which is to ensure that references to schedules and attachments include schedules and attachments as amended from time to time.
Clause (4)(d)
Clause (4)(d) of the instrument omits all text appearing immediately under the heading “SCHEDULES” in the Maryborough LAP (including the heading itself). This material was included for reference only and is not relevant or necessary.
Clause (4)(e)
Clause (4)(e) of the instrument omits Schedules One and Two of the Maryborough LAP and substitutes new schedules in their place. These schedules set out the details of the national, commercial and community radio broadcasting services, and the open narrowcasting radio services, that are to be available on particular frequencies in licence areas determined by the Maryborough LAP.
In particular, the schedules provide the technical specification numbers for each transmitter to be used by the services in each licence area in the Maryborough LAP, and specify the attachments which contain the technical specification for each of those transmitters.
The changes to the schedules include omitting the words “February 1998” from each heading, and inserting a new column that identifies the frequency used by each national, commercial and community radio broadcasting services, and open narrowcasting radio services.
Clause (4)(f)
Clause (4)(f) of the instrument deletes all text immediately following Schedule Two, up to and including the words: “The frequency shown is the centre frequency of the channel”. This material was included for reference only and is not relevant or necessary.
Clause (4)(g)
Clause (4)(g) inserts Schedule Three into the Maryborough LAP. Schedule Three provides the technical specification numbers for the transmitter to be used by the new community radio broadcasting service in the Tiaro RA1 licence area and specifies the attachment which contains the technical specification for this transmitter.
Clause (4)(h)
Clause (4)(h) of the instrument omits Attachments 1.1 to 2.2 to the Maryborough LAP.
Clause (4)(i)
Clause (4)(i) of the instrument inserts new Attachments 1.1 to 3.2 into the Maryborough LAP.
The new Attachment 1.1 contains the definition of the Maryborough (Qld) RA1 licence area in terms of the areas defined by the ABS, using 2006 census data, but otherwise remains unchanged.
New Attachments 1.2 to 1.6 contain the technical specifications for each transmitter to be used by the radio services in the Maryborough (Qld) RA1 licence area. Largely, these are unchanged from the previous Attachments, but Attachment 1.5 changes the transmission site and output pattern for a particular community service transmitting at Nikenbah on 105.1 MHz.
The new Attachment 2.1 contains the definition of the Hervey Bay RA1 licence area in terms of the areas defined by the ABS, using 2006 census data, but otherwise remains unchanged.
New Attachment 2.2 contains the technical specification for the transmitter to be used by the radio services in the Hervey Bay RA1 licence area.
The new Attachment 3.1 contains the definition of the Tiaro RA1 licence area in terms of the areas defined by the ABS, using 2006 census data, but otherwise remains unchanged.
New Attachment 3.2 contains the technical specification for the transmitter to be used by the radio services in the Tiaro RA1 licence area.
The changes to these Attachments include updating the ‘site tolerance’ specifications in each Attachment to refer to the Broadcasting Services (Technical Planning) Guidelines 2007 rather than referring to the “Technical Planning Guidelines”.
The nominal location of the transmitter specified in many of the Attachments has been updated to provide a more accurate description of the transmitter site but does not signify a change in the broadcast site.