HEAVY VEHICLE NATIONAL LAW
Queensland Class 3 Tandem Drive Axle (Cane Haulout Truck) Flotation Tyres Mass Exemption Notice 2022 (No. 1)
- Purpose
The purpose of this notice is to exempt cane haulout trucks fitted with flotation tyres in Queensland from certain mass requirements.
Note: This Notice replaces the Queensland Class 3 Tandem Drive Axle (Cane Haulout Truck) Flotation Tyres Mass Exemption Notice 2017 (No.1) upon its expiry. This Notice contains the same access and conditions.
2. Authorising provision
1) This Notice is made under the following provision of the Heavy Vehicle National Law (HVNL):
a) section 117 – Regulator’s power to exempt category of class 1 or 3 heavy vehicles from compliance with mass or dimension requirement.
3. Title
This exemption Notice may be cited as the Queensland Class 3 Tandem Drive Axle (Cane Haulout Truck) Flotation Tyres Mass Exemption Notice 2022 (No.1).
4. Commencement date
This Notice commences on 1 July 2022.
5. Expiry date
This Notice expires on 30 June 2027.
6. Definitions
1) Unless otherwise stated, words and expressions used in this Notice have the same meanings as those in the HVNL and its regulations.
2) In this Notice:
Cane haulout truck means a heavy vehicle that is constructed and used for hauling sugar cane from the field to a mill or transportation point.
Flotation Tyre means Alliance MPT382 flotation tyres, size 600/50R22.5.
7. Application
1) This notice applies to cane haulout trucks fitted with flotation tyres as defined in Clause 3 above, and are:
a) Transporting sugar cane from the field to a transport facility or mill nominated by the operator or farmer, including unladen return trips, of a radius of not more than 40km; or
b) Returning to a home base, commencing new operations, travelling for maintenance or repairs, or travelling for inspections or registration, provided that the vehicle is unladen.
2) This Notice applies in Queensland.
3) A vehicle to which this section applies is an eligible vehicle.
8. Exemption – Prescribed mass requirements
1) An eligible vehicle is exempt from the following mass requirements under Schedule 1 of the Heavy Vehicle (Mass Dimension and Loading) National Regulation (MDL Regulation):
a) section 4 – Mass limits for a single axle or axle group
2) An exemption in 1) only applies to the extent that specific conditional mass limits are provided in sections 9 of this Notice.
9. Conditions – Mass (tandem axle drive group)
1) The mass on the tandem axle drive group of an eligible vehicle must not exceed 16.5t.
2) While operating under this Notice, a cane haulout truck must comply with mass and speed limit ratings for flotation tyres set out in in appendix 1 of this Notice.
10. Conditions – Areas and routes
For the purposes of section 119(1)(a) of the HVNL, this Notice applies to all roads in Queensland.
11. Condition – Tandem axle drive group
An eligible vehicle must have a drive axle group consisting of a tandem axle fitted with flotation tires.
12. Condition – Record keeping
1) The operator of an eligible vehicle must maintain written records that show how the following risks are managed for each journey:
a) Tyre inflation pressure; and
b) Axle mass loading when the vehicle will operate on road.
13. Condition – Vehicle Modification
1) A cane haulout vehicle fitted with flotation tyres must comply with Modification Code D3 (Fitting of non-standard rear wheel components) of the National Code of Practice Heavy Vehicle Modifications (VSB6), except when either of the following circumstances applies:
a) Fitment of flotation tyres is an original vehicle manufacturer’s approved option and manufacturer’s requirements for fitting flotation tyres are complied with; or
b) The cane haulout truck was fitted with flotation tyres and operating under the Queensland Class 3 Tandem Drive Axle (Cane Haulout Truck) Flotation Tyres Mass Exemption Notice 2017 prior to 1 July 2022 and documented evidence is available showing that when fitted with flotation tyres the cane haulout vehicle speedometer calibration, speed limiting and braking performance complies with vehicle standards requirements.
Peter Caprioli
Executive Director (Freight and Supply Chain Productivity)
National Heavy Vehicle Regulator
Appendix 1: Mass and speed limit ratings for flotation tyres
SW (mm) | OD (mm) | Static | 10 | 20 | 25 | 30 | 40 | 50 | 60 | 65 | 70 | 80 | 90 | 100 |
1.0 | 4150 | 2990 | 2790 | 2240 | 2080 | 1910 | 1860 | - | - | - | - | - | - | |
1.5 | 5280 | 3800 | 3550 | 2850 | 2640 | 2430 | 2360 | - | - | - | - | - | - | |
2.0 | 6250 | 4500 | 4210 | 3380 | 3130 | 2880 | 2800 | - | - | - | - | - | - | |
2.5 | 7130 | 5130 | 4800 | 3850 | 3560 | 3280 | 3190 | - | - | - | - | - | - | |
3.0 | 7930 | 5710 | 5330 | 4280 | 3960 | 3650 | 3550 | - | - | - | - | - | - | |
3.5 | 8680 | 6250 | 5840 | 4680 | 4340 | 3990 | 3890 | 3820 | 3760 | 3710 | 3610 | - | - | |
4.0 | 9380 | 6750 | 6320 | 5060 | 4690 | 4310 | 4200 | 4130 | 4070 | 4010 | 3900 | - | - | |
4.5 | 10050 | 7240 | 6770 | 5430 | 5030 | 4620 | 4500 | 4420 | 4360 | 4300 | 4180 | - | - | |
5.0 | 10700 | 7700 | 7210 | 5780 | 5350 | 4920 | 4790 | 4710 | 4640 | 4580 | 4450 | - | - | |
5.5 | 11330 | 8150 | 7620 | 6120 | 5660 | 5210 | 5070 | 4980 | 4920 | 4850 | 4710 | 4620 | 4530 | |
6.0 | 11930 | 8590 | 8040 | 6440 | 5960 | 5490 | 5340 | 5250 | 5180 | 5100 | 4960 | 4870 | 4770 | |
6.5 | 12500 | 9000 | 8420 | 6750 | 6250 | 5750 | 5600 | 5500 | 5430 | 5350 | 5200 | 5100 | 5000 |