Heavy Vehicle National Law - Queensland Class 3 Heavy Vehicle (Indivisible Item) Dimension Exemption Notice 2019 (No.1)

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au C2019G00057 In force Gazette

Legislation content

HEAVY VEHICLE NATIONAL LAW

Queensland Class 3 Heavy Vehicle (Indivisible Item) Dimension Exemption Notice 2019 (No.1)

  1. Purpose

This Notice provides dimension exemptions that allow specified Heavy Vehicles to carry large indivisible items.

 

Note:-  this Notice replaces elements of the Queensland Guideline for Excess Dimension - Vehicles Carrying Indivisible Articles, Special Purpose Vehicles, Vehicles that require a Pilot or Escort in Queensland, Form 4.

2.       Definitions

 

Access Conditions Guide means the Queensland Access Conditions Guide published by TMR that contains further specific information referenced in this Schedule.

Built up area has the same meaning as in the Access Conditions Guide

 

Eligible vehicle means a heavy vehicle that exceeds prescribed dimension requirements when loaded with one or more indivisible items, and is a:

a)      A B-double; or

b)      A road train; or

c)       A truck and dog trailer combination exceeding 19m in length but not more than 31.5m that complies with the Queensland Class 3 Truck and Dog Notice.

Large Indivisible Item has the same meaning as in s116 of the HVNL.

 

Pilot and Escort Guideline means the Guideline for Pilot and Escort Operations in Queensland published by TMR that contains further specific information referenced in this Schedule.

 

Truck and dog means, for the purpose of this Notice only, a Type 1 Road Train.

 

Type 1 Road Train for the purpose of this Notice:

a)      has the same meaning as in the Queensland Schedule of the National Class 2 Road Train Notice; or

b)      is a truck and dog trailer combination exceeding 19m in length but not more than 31.5m that complies with the Queensland Class 3 Truck and Dog Notice.

 

Type 2 Road Train has the same meaning as in the Queensland Schedule of the National Class 2 Road Train Notice.

 

TMR means the Queensland Department of Transport and Main Roads.

 

TMR Excess Mass and Conditions means the route and area conditions, and including the Conditions of Operation Database, maintained and published by TMR.

3.       Application

 

1)      This notice applies to an eligible vehicle operating in Queensland.

 

4.       Exemptions

 

1)      This Notice exempts eligible vehicles from the following dimension requirements in Schedule 6 of the Heavy Vehicle (Mass Dimension & Loading) National Regulation:

a)      Section 7

b)      Section 8(d).

 

5.       Condition – Dimensions

 

1)      An eligible vehicle operating under this notice must comply with the following dimension conditions:

a)      Eligible vehicles up to 2.5m wide may be up to 4.8m high.

b)      Eligible vehicles up to 3.2m wide may be up to 4.6 m high.

 

2)      In addition to the conditional dimensions above, eligible vehicles travelling on the Barkly Highway between the Queensland/Northern Territory border and Camooweal may use the following conditional dimensions:

a)      Type 1 road trains up to 3.5m wide and 4.85m high; and

b)      Type 2 road trains up to 3.2m wide and 4.85m high.

 

3)      A Type 2 road train travelling on the Barkly Highway, between Cloncurry and Mt Isa

may only carry an indivisible article wider than 2.5m to a width of 3.2m on the first

trailer of the combination or in instances of a truck and trailer road train combination, the truck only.

 

6.       Conditions – Approved Routes

 

1)      An eligible vehicle operating under a mass exemption of this Notice may operate on the routes specified in Table 1 when loaded with large indivisible items and travelling on particular routes. An eligible vehicle listed in Column 1 must load indivisible items as per Column 2 when operating on the routes listed in Column 3.

 

Table 1 Networks for eligible vehicles and combinations

Column 1

Column 2

Column 3

Type of combination carrying an indivisible article

Vehicles permitted to carry indivisible articles to a width of 3.2m and/or a height of 4.6m

Approved route where permitted to operate

Type 1 prime mover and semitrailer road train combination

All trailers

Type 1 and Type 2 road train routes

Type 2 prime mover and semitrailer road train combination

First and second trailer

Type 2 road train routes

Type 1 road train combination with rigid truck hauling unit

Truck and trailer

Type 1 and Type 2 road train routes

Type 2 road train combination with rigid truck hauling unit

Truck and first trailer

Type 2 road train route

B-double

All trailers

Type 1 and Type 2 road train routes

 

Type of combination carrying an indivisible article

Vehicles permitted to carry indivisible articles to width of 2.5m and/or a height of 4.8m

Approved route where permitted to operate

A road train or B-double combination

Any rigid truck or trailer of the combination

B-doubles and Type 1 road trains on Type 1 and Type 2 road train routes. Type 2 road trains on Type 2 road train routes only

 

7.       Conditions – General Cargo

 

1)      An eligible vehicle or combination may carry general cargo at the same time as an indivisible item provided:

 

a)      the vehicle combination and its load complies with the mass limits in the Heavy Vehicle (Mass, Dimension and Loading) National Regulation; and

b)      the loading space required for the general cargo does not exceed a dimension limit in the Heavy Vehicle (Mass, Dimension and Loading) National Regulation.

 

8.       Conditions - Pilots and escorts

 

1)      A pilot or escort vehicle assisting an eligible vehicle operating under this Notice must comply with the Pilot and Escort Guideline as it relates to Load Carrying Vehicles.

2)      In addition to the pilot and escort requirements above, the following special requirements apply on the Warrego Highway between Toowoomba and the Chinchilla Shire boundary for vehicles operating under this Notice:

 

a)      A Type 1 road train or B-double combination carrying indivisible articles wider than 2.5m to a width of 3.2m on all trailers or truck and trailer of a truck and trailer road train, must be accompanied by one pilot vehicle in accordance with the conditions specified in the Pilot and Escort Guideline when travelling on the Warrego Highway between Toowoomba and the Chinchilla Shire boundary (approximately 3km north west of Warra).

 

3)      Vehicles operating in accordance with 2) are exempt from the requirement of being accompanied by a pilot vehicle if an large indivisible article is being carried on only the first trailer of the combination, or in instances of a rigid truck and trailer road train combination, the truck only.

 

9.       Conditions – Application of Schedule 8 of the MDL Regulation

 

1)      The following sections of Schedule 8 of the MDL Regulation apply to eligible vehicles operating under this Notice:

 

a)       Division 1 General conditions

b)       Division 2 sections 12 and 13.

Note: Specifically, this is an application for the Class 1 conditions in Schedule 8 to a Class 3 vehicles under this Notice.

 

Peter Caprioli

Executive Director (Freight and Supply Chain Productivity)

National Heavy Vehicle Regulator

 

Overview

The Heavy Vehicle National Law Queensland Class 3 Heavy Vehicle (Indivisible Item) Dimension Exemption Notice 2019 (No. 1) was enacted to address the need for exemptions to allow certain heavy vehicles to carry large indivisible items, which would otherwise not comply with the standard dimension requirements set out in the Heavy Vehicle (Mass, Dimension and Loading) National Regulation. This Notice provides specific dimension exemptions for eligible vehicles such as B-doubles, road trains, and truck and dog trailer combinations, which exceed prescribed dimension requirements when loaded with indivisible items. The Notice aims to streamline the transportation of these items by reducing regulatory burdens while ensuring safety and compliance with certain conditions. The Notice was introduced by the National Heavy Vehicle Regulator and is intended to facilitate the efficient movement of heavy vehicles carrying indivisible items across Queensland, while maintaining the safety and integrity of the transport network.

Scope and Application

The Heavy Vehicle National Law Queensland Class 3 Heavy Vehicle (Indivisible Item) Dimension Exemption Notice 2019 (No.1) provides dimension exemptions that allow specified heavy vehicles to carry large indivisible items. This Notice applies to eligible vehicles operating in Queensland, which are defined as B-doubles, road trains, or truck and dog trailer combinations exceeding 19m but not more than 31.5m in length that comply with the Queensland Class 3 Truck and Dog Notice. The Notice exempts eligible vehicles from certain dimension requirements specified in Schedule 6 of the Heavy Vehicle (Mass Dimension & Loading) National Regulation. However, these vehicles must still comply with certain dimensional conditions, which vary based on the type and location of the vehicle. For instance, eligible vehicles up to 2.5m wide may be up to 4.8m high, while those up to 3.2m wide may be up to 4.6m high. Furthermore, certain conditional dimensions apply to eligible vehicles travelling on the Barkly Highway between the Queensland/Northern Territory border and Camooweal. The Notice also specifies routes on which eligible vehicles may operate when loaded with large indivisible items, as well as conditions for carrying general cargo and requirements for pilots and escorts. The Notice extends its application through subordinate instruments such as the Pilot and Escort Guideline and the Queensland Access Conditions Guide.

Key Provisions

The Queensland Class 3 Heavy Vehicle (Indivisible Item) Dimension Exemption Notice 2019 (No.1) outlines specific exemptions and conditions for certain heavy vehicles carrying large indivisible items in Queensland (s3). This notice applies to eligible vehicles, which include B-doubles, road trains, and truck and dog trailer combinations that exceed prescribed dimension requirements when loaded with one or more indivisible items (s4). The notice exempts these eligible vehicles from certain dimension requirements specified in Schedule 6 of the Heavy Vehicle (Mass Dimension & Loading) National Regulation, specifically Section 7 and Section 8(d) (s4). To operate under this notice, eligible vehicles must adhere to specified dimension conditions. For example, vehicles up to 2.5m wide can be up to 4.8m high, while those up to 3.2m wide can be up to 4.6m high (s5(1)). Additional conditional dimensions apply for vehicles travelling on the Barkly Highway between the Queensland/Northern Territory border and Camooweal, allowing Type 1 road trains up to 3.5m wide and 4.85m high, and Type 2 road trains up to 3.2m wide and 4.85m high (s5(2)). Type 2 road trains are also permitted to carry an indivisible article wider than 2.5m to a width of 3.2m on the first trailer of the combination or the truck in a truck and trailer road train combination when travelling on the Barkly Highway between Cloncurry and Mt Isa (s5(3)). Eligible vehicles can operate on specified routes when loaded with large indivisible items, as detailed in Table 1 of the notice (s6). The table specifies the type of combination, the vehicles permitted to carry indivisible items, and the approved routes for operation. For instance, Type 1 road train and semitrailer road train combinations can operate on Type 1 and Type 2 road train routes, while Type 2 road train combinations can operate on Type 2 road train routes (s6). Vehicles may also carry general cargo provided the vehicle combination and its load comply with mass limits and the loading space required for the general cargo does not exceed specified dimension limits (s7). If a pilot or escort vehicle assists an eligible vehicle, it must comply with the Pilot and Escort Guideline as it relates to Load Carrying Vehicles (s8(1)). Additional requirements apply for vehicles on the Warrego Highway between Toowoomba and the Chinchilla Shire boundary, where Type 1 road train or B-double combinations carrying indivisible articles wider than 2.5m must be accompanied by a pilot vehicle, except when the large indivisible article is carried on only the first trailer or the truck in a rigid truck and trailer road train combination (s8(2)-(3)). Finally, certain sections of Schedule 8 of the MDL Regulation apply to eligible vehicles operating under this notice, specifically Division 1 General conditions and Division 2 sections 12 and 13 (s9). These sections outline the general conditions and specific requirements for eligible vehicles, ensuring compliance with the heavy vehicle regulations while transporting large indivisible items.

Legal classification tags

Area of Law
Commercial Law
Instrument
Gazette Notice
Concepts
Definitions & Interpretation
Conditions
Regulatory Standards

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.