Food Standards (Proposal P1053 – Food Safety Management Tools – Consequential Amendments) Variation

Administered by Department of Health, Disability and Ageing

Legislation au F2022L01586 Not in force Legislative Instrument

Legislation content

Food Standards (Proposal P1053 – Food Safety Management Tools – Consequential Amendments) Variation

1. Authority

Section 13 of the Food Standards Australia New Zealand Act 1991 (the FSANZ Act) provides that the functions of Food Standards Australia New Zealand (the Authority) include the development of standards and variations of standards for inclusion in the Australia New Zealand Food Standards Code (the Code).

Division 2 of Part 3 of the FSANZ Act specifies that the Authority may prepare a proposal for the development or variation of food regulatory measures, including standards. This Division also stipulates the procedure for considering a proposal for the development or variation of food regulatory measures.

The Authority prepared Proposal P1053 to consider mandating three food safety management tools. The Authority considered the Proposal in accordance with Division 2 of Part 3 and has approved a draft Standard and this related draft consequential variation.

2. Variation is a legislative instrument

The approved draft consequential variation is a legislative instrument for the purposes of the Legislation Act 2003 (see section 94 of the FSANZ Act) and is publicly available on the Federal Register of Legislation (www.legislation.gov.au).

This instrument is not subject to the disallowance or sunsetting provisions of the Legislation Act 2003. Subsections 44(1) and 54(1) of that Act provide that a legislative instrument is not disallowable or subject to sunsetting if the enabling legislation for the instrument (in this case, the FSANZ Act): (a) facilitates the establishment or operation of an intergovernmental scheme involving the Commonwealth and one or more States; and (b) authorises the instrument to be made for the purposes of the scheme. Regulation 11 of the Legislation (Exemptions and other Matters) Regulation 2015 also exempts from sunsetting legislative instruments a primary purpose of which is to give effect to an international obligation of Australia.

The FSANZ Act gives effect to an intergovernmental agreement (the Food Regulation Agreement) and facilitates the establishment or operation of an intergovernmental scheme (national uniform food regulation). That Act also gives effect to Australia’s obligations under an international agreement between Australia and New Zealand. For these purposes, the Act establishes the Authority to develop food standards for consideration and endorsement by the Food Ministers Meeting (FMM). The FMM is established under the Food Regulation Agreement and the international agreement between Australia and New Zealand, and consists of New Zealand, Commonwealth and State/Territory members. If endorsed by the FMM, the food standards on gazettal and registration are incorporated into and become part of Commonwealth, State and Territory and New Zealand food laws. These standards or instruments are then administered, applied and enforced by these jurisdictions’ regulators as part of those food laws.

3. Purpose

The Authority has approved a draft variation called Food Standards (Proposal P1053 – Food Safety Management Tools – Consequential Amendments) Variation to make a consequential amendment to Standard 1.1.1 to account for the commencement of approved draft Standard 3.2.2A.

4. Documents incorporated by reference

The approved draft consequential variation does not incorporate any documents by reference.

5. Consultation

In accordance with the procedure in Division 2 of Part 3 of the FSANZ Act, the Authority’s consideration of Proposal P1053 included one round of public consultation following an assessment and the preparation of a draft standard, consequential variation and associated report. Submissions were called for on 14 February 2022 for an eight-week consultation period.

A Decision Regulation Impact Statement (DRIS) was prepared by the Authority and has been approved by the Office of Best Practice Regulation (Reference - OBPR21-01217). A copy of the DRIS is available on the FSANZ website.

6. Statement of compatibility with human rights

This instrument is exempt from the requirements for a statement of compatibility with human rights as it is a non-disallowable instrument under section 44 of the Legislation Act 2003.

7. Variation

Clause 1 of the approved draft consequential variation provides that the name of that variation is Food Standards (Proposal P1053 – Food Safety Management Tools – Consequential Amendments) Variation.

Clause 2 of the approved draft consequential variation provides that the Code is amended by the Schedule to that variation.

Clause 3 provides that the approved draft consequential variation will commence immediately after draft Standard 3.2.2A takes effect.

Item 1 of the Schedule to the approved draft consequential variation amends subsection 1.1.1—2(2) of Standard 1.1.1 of the Code to include in that subsection a reference to Standard 3.2.2A. The subsection lists all the standards of the Code arranged into Chapters, Parts and a set of Schedules. The list does not currently contain a reference to Standard 3.2.2A.

The effect of the amendment, when the Standard 3.2.2A and the variation both commence, will be that Standard 3.2.2A will be listed in subsection 1.1.1—2(2) of the Code immediately after the reference in that subsection to Standard 3.2.2.

 

Overview

The Food Standards (Proposal P1053 – Food Safety Management Tools – Consequential Amendments) Variation 2022, enacted under the authority of the Food Standards Australia New Zealand Act 1991, addresses the need for consequential amendments in the Australia New Zealand Food Standards Code to align with the introduction of new food safety management tools. This legislative instrument was developed by Food Standards Australia New Zealand (FSANZ) and approved in accordance with the procedures outlined in Division 2 of Part 3 of the FSANZ Act, which governs the preparation and consideration of proposals for food regulatory measures. The overarching policy objective is to ensure that food safety management standards are effectively integrated into the existing regulatory framework, thereby enhancing the overall safety and quality of food products across Australia and New Zealand. Public consultation was conducted as part of the process, with the aim of incorporating feedback into the final legislative instrument. The variation is not subject to disallowance or sunsetting, aligning with the requirements of the Legislation Act 2003, given its role in facilitating intergovernmental and international food regulation schemes.

Scope and Application

The Food Standards (Proposal P1053 – Food Safety Management Tools – Consequential Amendments) Variation applies to the administration and enforcement of food standards within Australia and New Zealand, governed by the Food Standards Australia New Zealand Act 1991 (FSANZ Act). The Act empowers Food Standards Australia New Zealand to develop and vary food standards, which, once endorsed by the relevant authorities, become part of the national food laws in both countries. This consequential amendment pertains specifically to aligning Standard 1.1.1 in the Australia New Zealand Food Standards Code with the new Standard 3.2.2A, which mandates food safety management tools. This amendment is intended to ensure consistency and comprehensiveness in food safety management practices across the food industry in both nations. The variation does not incorporate any documents by reference and is exempt from disallowance and sunsetting provisions, reflecting its critical role in maintaining food safety standards. It is applicable to all entities involved in the production, processing, distribution, and sale of food products within Australia and New Zealand, ensuring they adhere to the updated regulatory requirements.

Key Provisions

The main operative sections of this variation pertain to the amendment of Standard 1.1.1 within the Australia New Zealand Food Standards Code to include a reference to the newly mandated Standard 3.2.2A. This is detailed in Clause 2 and Item 1 of the Schedule to the approved draft consequential variation (Clause 2, Item 1). The variation will take effect immediately after the draft Standard 3.2.2A is enacted, ensuring that the reference to this new standard is incorporated in the list of all standards within the Code (Clause 3). This amendment is intended to streamline and update the regulatory framework by integrating the new food safety management tools into the existing standards. The obligations imposed by this Act primarily revolve around the amendment of the Australia New Zealand Food Standards Code to reflect the new food safety management tools. This includes updating subsection 1.1.1—2(2) of Standard 1.1.1 to incorporate a reference to Standard 3.2.2A (Item 1 of the Schedule). The Authority is mandated to ensure that these changes are implemented in a manner that aligns with the overarching objectives of maintaining food safety and quality across Australia and New Zealand. Additionally, entities governed by the Code are required to comply with the updated standards, ensuring that their practices and processes adhere to the latest regulatory requirements. In terms of legal consequences, breaches of the amended standards could lead to enforcement actions by relevant authorities. While the document does not explicitly state the specific penalties for non-compliance, it is reasonable to infer that breaches could result in fines, legal action, or other regulatory sanctions under the FSANZ Act and related food safety legislation. The precise penalties would depend on the nature and severity of the breach, as well as the jurisdiction in which it occurs. It is important for entities subject to the Code to ensure strict adherence to the updated standards to avoid any potential legal repercussions.

Legal classification tags

Area of Law
Food Law
Instrument
Variation
Concepts
Definitions & Interpretation
Commencement Provisions
Regulatory Standards
Reporting & Disclosure Obligations

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.