Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1)

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2013L01711 Not in force Legislative Instrument

Legislation content

Explanatory Statement

Civil Aviation Regulations 1988

Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1)

 

Purpose

The purpose of Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1) (the CAO amendment) is to specify when an applicant for an aircraft weight control authority (an authority) will be taken to have met the training requirement for the issue of the authority, and to remove the reference to an exemption from the examination requirement for the issue of the authority.

 

Legislation

Section 98 of the Civil Aviation Act 1988 (the Act) empowers the Governor-General to make regulations for the Act and the safety of air navigation.

 

Under paragraph 33B (1) of the Civil Aviation Regulations 1988 (CAR 1988), CASA may, in writing and in accordance with the Civil Aviation Orders (the CAOs), issue authorities to weigh aircraft and determine the centre of gravity of each aircraft for the purpose of determining requirements to control the centre of gravity during operation. Such authorities are known as aircraft weight control authorities.

 

Subsection 1 of CAO 100.28 sets out the requirements for the issue of an authority. Paragraph 1.1 of CAO 100.28 requires that applicants must provide satisfactory evidence that they have:

(a) been adequately trained for the purpose (the training requirement); and

(b) had adequate recent practical experience of the duties to be performed in relation to the authority (the experience requirement); and

(c) passed the required examination (the examination requirement). The syllabus for the examination is specified in Appendix I of CAO 100.28.

 

Background

Paragraph 1.2 of CAO 100.28 provided that an applicant who held recognised engineering qualifications, such as admitting to Graduate Membership of the Institution of Engineers (Australia), and met the training and experience requirements may be granted an exemption from the examination requirement.

 

It is CASA’s view that, in order to maintain an appropriate standard for the issue of an authority, it is more appropriate that an applicant’s qualifications should be taken to satisfy the training requirements rather than exempt the applicant from the examination requirement.

 

Furthermore, the occupational categories and grades of membership currently used by Engineers Australia, formerly known as the Institution of Engineers (Australia), would admit under the general description Graduate Membership of the Institution of Engineers (Australia) a lower standard of engineering qualifications than was intended by CASA or is considered appropriate for the issue of an authority.

 

CAO amendment

The CAO amendment updates the requirements for the issue of an authority to reflect the occupational categories and grades of membership currently used by Engineers Australia, and to limit the application of paragraph 1.2 of CAO 100.28 to the training requirement only.

 

Item 1 of Schedule 1 of the CAO amendment replaces paragraph 1.2 of CAO 100.28. The new paragraph 1.2 deems an applicant to have met the training requirement for the issue of an authority if the applicant has completed a tertiary qualification in a relevant engineering discipline and is eligible for Graduate Membership of Engineers Australia in the Professional Engineer occupational category. A relevant engineering discipline is one that adequately covers aircraft weight control, including the general theory elements of the syllabus in Appendix I of CAO 100.28.

 

The assessment for all applicants for the issue of an authority will continue to include the 3 elements specified in paragraph 1.1 of CAO 100.28, that is the training, experience and examination requirements. New paragraph 1.2 of CAO 100.28 provides an acceptable means of compliance with the training requirement, but it is not the only means of compliance. Each applicant’s training will be assessed for adequacy on a case by case basis, whether they hold a tertiary engineering qualification or not. The general theory elements of the syllabus in Appendix I of the CAO will be considered in the assessment.

 

The removal from paragraph 1.2 of CAO 100.28 of the mention of the possibility of an exemption from the examination requirement does not affect CASA’s ability to grant such an exemption under paragraph 11.160 (1) (b) of the Civil Aviation Safety Regulations 1998 in appropriate cases.

 

Item 2 of Schedule 1 of the CAO amendment amends paragraph 2.1 of CAO 100.28. It removes the requirement for an application for an authority to be made to a CASA field office. The current practice is for applications to be made to CASA via CASA’s Permission Application Centre, rather than CASA’s Regional Offices.

 

Item 3 of Schedule 1 of the CAO amendment makes a consequential amendment to paragraph 3.1 of CAO 100.28 in light of the amendment in item 1. It removes the reference to an exemption granted in accordance with paragraph 1.2. New paragraph 1.2 does not mention an exemption from, and does not relate to, the examination requirement.

 

Item 4 of Schedule 1 of the CAO amendment amends the note to paragraph 3.2 to CAO 100.28. It removes the reference to examination results being notified by a CASA field office. Instead, the note now states the results will be notified to the candidate by CASA.

 

Legislative Instruments Act 2003 (LIA 2003)

Under subsections 98 (5) and 98 (5AAA) of the Act, where the regulations provide for certain instruments to be issued in the form of CAOs, such CAOs are legislative instruments. Regulation 33B of CAR 1988 empowers CASA to make CAOs relating to the issue of authorities. The CAO amendment is, therefore, a legislative instrument and it is subject to registration, and tabling and disallowance in the Parliament, under sections 24, and 38 and 42, of the LIA 2003.

 

Consultation

Consultation under section 17 of the LIA was undertaken as follows.

 

A draft instrument for the proposed amendments to paragraphs 1.2 and 3.1 of CAO 100.28 was published by CASA and by broadcast email, on 7 May 2013, inviting comments from the public and aviation industry generally by 7 June 2013. In addition to being available on the CASA website, it was made available via the joint CASA/industry Standards Consultative Committee (SCC) forum and the SCC Certification Standards Sub-committee forum.

 

CASA has considered the responses that it received on the draft instrument. CASA received 7 comments on the proposed amendment and those comments were generally supportive of the proposed amendment. The negative aspects of the comments expressed concerns about the adequacy of general tertiary engineering qualifications as training for an authority, and the misconception that the amendment would make a tertiary engineering qualification a requirement for the issue of an authority.

 

The amendments removing references to field office are minor and machinery administrative amendments and CASA believes that no consultation on those amendments is necessary or appropriate.

 

Statement of Compatibility with Human Rights

A Statement of Compatibility with Human Rights is at Attachment 1.

 

Office of Best Practice Regulation (OBPR)

OBPR assessed that the proposed amendments are minor in nature and that no further analysis in the form of a Regulation Impact Statement was required (OBPR ID: 15000).

 

Making and commencement

The CAO amendment has been made by the Director of Aviation Safety, on behalf of CASA, in accordance with subsection 73 (2) of the Act.

 

The CAO amendment commences on the day after registration.

 

[Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1)]

Appendix 1

Statement of Compatibility with Human Rights

 

Prepared in accordance with Part 3 of the
Human Rights (Parliamentary Scrutiny) Act 2011

 

Civil Aviation Regulations 1988

Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1)

 

This legislative instrument is compatible with the human rights and freedoms recognised or declared in the international instruments listed in section 3 of the Human Rights (Parliamentary Scrutiny) Act 2011.

 

Overview of the legislative instrument

The purpose of Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1) (the CAO amendment) is to amend Civil Aviation Order (CAO) 100.28 to specify when an applicant for an aircraft weight control authority will be taken to have met the training requirements for the issue of the authority, and to remove the reference to an exemption from the examination requirement for the issue of the authority.

 

The CAO amendment also makes other consequential and minor amendments to CAO 100.28.

 

Human rights implications

The instrument does not engage any of the applicable rights or freedoms.

 

Conclusion

This legislative instrument is compatible with human rights as it does not raise any human rights issues.

 

Civil Aviation Safety Authority

Overview

The Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1) amends Civil Aviation Order 100.28, which concerns the issue of aircraft weight control authorities, to specify when an applicant will be considered to have met the training requirements and to remove the reference to an exemption from the examination requirement for the issue of the authority. This amendment responds to concerns that the previous exemption provisions may not uphold the necessary standards for issuing such authorities. The Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1) was enacted to ensure that applicants meet appropriate standards for obtaining aircraft weight control authorities by aligning the training requirements with current occupational categories and grades of membership used by Engineers Australia. This change aims to maintain the integrity of the authority issuance process by ensuring that only suitably qualified individuals are granted such authorities. The Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1) was made by the Civil Aviation Safety Authority (CASA) and is subject to the legislative requirements under the Legislative Instruments Act 2003, including registration and parliamentary scrutiny.

Scope and Application

The Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1) amends Civil Aviation Order (CAO) 100.28, which sets out the requirements for the issue of an aircraft weight control authority by the Civil Aviation Safety Authority (CASA). This instrument applies to individuals and entities that seek to obtain an aircraft weight control authority, which involves weighing aircraft and determining the centre of gravity to control it during operation. The CAO amendment is applicable nationally, as it pertains to the regulatory framework overseen by CASA under the Civil Aviation Act 1988. The amendment specifies that applicants who hold recognised engineering qualifications and meet certain training and experience requirements can be deemed to have satisfied the training requirement for the authority. However, all applicants must still meet the experience requirement and pass the required examination, as these elements remain integral to the authority issuance process. Notably, the amendment removes the provision for exemptions from the examination requirement for those meeting certain qualifications, ensuring a consistent standard across all applicants. The CAO amendment reflects CASA’s view that maintaining a high standard for authority issuance is crucial, and it aims to address discrepancies in the qualifications previously accepted for exemption from the examination. The legislative instrument is subject to the requirements of the Legislative Instruments Act 2003, including registration and parliamentary scrutiny.

Key Provisions

The Civil Aviation Order 100.28 Amendment Instrument 2013 (No. 1) (CAO amendment) introduces several significant changes to Civil Aviation Order (CAO) 100.28, which governs the issue of aircraft weight control authorities by the Civil Aviation Safety Authority (CASA). Under the Civil Aviation Act 1988, CASA has the authority to issue such authorities, provided that applicants meet certain criteria. The primary changes introduced by the CAO amendment concern the training requirements for applicants and the removal of the possibility of exemption from the examination requirement. The CAO amendment specifies that an applicant for an aircraft weight control authority will be deemed to have met the training requirement if they have completed a tertiary qualification in a relevant engineering discipline and are eligible for Graduate Membership of Engineers Australia in the Professional Engineer occupational category (subsection 100.28(1.2) of the CAO). This change aligns the training requirements with the current occupational categories and grades of membership used by Engineers Australia, ensuring a higher standard of engineering qualifications for applicants. It is important to note that while this is an acceptable means of compliance, it is not the only means. Each applicant's training will still be assessed for adequacy on a case-by-case basis, and the general theory elements of the syllabus will be considered. The removal of the exemption from the examination requirement from paragraph 1.2 of CAO 100.28 does not affect CASA's ability to grant such an exemption in appropriate cases under paragraph 11.160(1)(b) of the Civil Aviation Safety Regulations 1998. Applicants for an aircraft weight control authority are obligated to provide satisfactory evidence that they meet the training, experience, and examination requirements set out in CAO 100.28. The training requirement involves completing a tertiary qualification in a relevant engineering discipline and being eligible for Graduate Membership of Engineers Australia in the Professional Engineer occupational category. The experience requirement entails having adequate recent practical experience of the duties to be performed in relation to the authority. Lastly, the examination requirement necessitates passing the required examination, the syllabus for which is specified in Appendix I of CAO 100.28. Each applicant's training, experience, and examination will be assessed for adequacy on a case-by-case basis. Failure to comply with the requirements set out in the CAO amendment may result in CASA not issuing an aircraft weight control authority to the applicant. There are no specific offences, penalties, or civil/criminal consequences outlined in the CAO amendment itself. However, non-compliance with the Civil Aviation Act 1988 or the Civil Aviation Regulations 1988 could result in penalties under those Acts, including fines and imprisonment. The exact penalties would depend on the specific provision breached and the circumstances of the breach.

Legal classification tags

Area of Law
Administrative Law
Civil Aviation Law
Instrument
Regulation
Concepts
Definitions & Interpretation
Regulatory Standards
Licensing & Registration
Reporting & Disclosure Obligations
Compliance Obligations
Enforcement Powers

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.