CASA 550/09 - Amendment of instrument CASA 289/06 - Specification - examinations for aircraft maintenance engineer licence category electrical

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2010L00065 Not in force Legislative Instrument

Legislation content

Explanatory Statement

Civil Aviation Order 100.94

Amendment of instrument CASA 289/06 — Specification – examinations for aircraft maintenance engineer licence category electrical

 

Legislation

Section 98 of the Civil Aviation Act 1988 (the Act) empowers the Governor-General to make regulations for the Act and the safety of air navigation.

 

CASA issues aircraft maintenance engineer licences (AME licences) under regulation 31 of the Civil Aviation Regulations 1988 (CAR 1988). Licences are endorsed with 1 or more work categories which describe the areas in which the privileges of the licence may be exercised. These categories are airframes, engines, radio, electrical and instruments.

 

Under regulation 31B of CAR 1988, the privileges conferred by an AME licence for a particular category are further refined by means of ratings which are also endorsed on the licence. The Civil Aviation Orders (CAOs) may specify ratings and the maintenance activities covered by them, for example, CAO 100.91 for the category airframes, CAO 100.92 for the category engines, CAO 100.93 for the category radio, CAO 100.94 for the category electrical, and CAO 100.95 for the category instruments.

 

Only a qualified person may apply to CASA for the issue of an AME licence. A qualified person means a person who has passed the required examinations. Under subregulation 5 (1) of CAR 1988, the required examinations may be prescribed in CAOs.

 

Under regulation 31C of CAR 1988, examinations for particular ratings may be prescribed in CAOs. Under subsection 6 of CAO 100.94, for the grant of a licence, or the endorsement of a rating, applicants must pass the relevant examinations specified by CASA.

 

Specification

Specification  examinations for aircraft maintenance engineer licence category electrical (the Specification) contains the operative provisions for examinations for an AME licence in the electrical category, and the examinations for the endorsement of ratings on the licence.

 

As explained and applied by a series of provisions in Schedule 1 of the Specification, the table in Schedule 1 lists the relevant examinations by reference to the core subjects, specific group subjects and specific aircraft type examinations. All core subjects are generally mandatory. Specific group subjects are required depending on the rating which a person seeks to have endorsed on the licence. Specific aircraft type examinations are required if the person seeks a rating for that specific aircraft type.

 

The provisions in clause 4 of Schedule 1 describe the examination credits that may be available to an applicant, and provide for certain written or oral examinations to be waived if conditions are met.

 

Aviation Australia

Aviation Australia Pty Ltd (Aviation Australia) is an Australian proprietary company incorporated in Queensland with shares held on behalf of the State. The shareholder of Aviation Australia is the Minister for Education and Training, in trust, on behalf of the State of Queensland, and the Minister appoints the Board of Directors. Through the Aviation Australia Advisory Forum, Aviation Australia consults with the aviation industry in developing Aviation Australia’s programs.

 

Aviation Australia is a recognised organisation for the training and examination of candidates wishing to qualify for maintenance authorities (MAs) under CAO 100.66. Among the mandatory courses required for an MA is Module 10, Aviation Legislation, in Part 3, Appendix 4 of CAO 100.66. This course involves detailed training and examination in the Australian aviation regulatory framework for a wide range of relevant activities, including aircraft maintenance certification, type certification, commercial responsibilities, airworthiness and equipment requirements, and associated documentation requirements.

 

Specification Amendment — Airworthiness Administration

One of the core subjects required for an AME licence under the Specification is Airworthiness Administration (code AA), a course in which the examination is similar to, though not quite as exacting as, Module 10. Currently, an MA holder who has successfully completed Module 10 and who wishes to qualify as an AME holder must also pass the examination in Airworthiness Administration because under the Specification no credit is recognised for Module 10.

 

Aviation Australia has developed its Module 10 course for MA candidates in such a way that CASA is satisfied that it offers an even more effective method of training and examination in the subject matters of Airworthiness Administration. Other recognised organisations may also achieve this outcome.

 

To recognise this, CASA has amended section 4 of the Specification to provide an AME candidate with a credit for Airworthiness Administration if the candidate has knowledge of Module 10, Aviation Legislation, in Part 3, Appendix 4 of CAO 100.66, and has demonstrated the knowledge by successful examination for clause 13 of CAO 100.66, and his or her knowledge training and examination were conducted by a recognised organisation under CAO 100.66 that is specifically approved in writing for this purpose.

 

CASA approval is dependent on CASA’s satisfaction that, through Module 10, the recognised organisation can train and examine in the comprehensive specifics of Airworthiness Administration for a licence group. This is the case for Aviation Australian and a separate approval instrument will be issued for that organisation as a result of the Specification Amendment.

 

Legislative Instruments Act

Under subsection 5 (1) of the Legislative Instruments Act 2003 (the LIA), if an instrument is of a legislative character and made in the exercise of a power delegated by the Parliament, it is a legislative instrument for the purposes of the LIA. Because of its prescriptive character, the Specification, and any Specification Amendment is considered to be a legislative instrument and is, therefore, subject to tabling and disallowance in the Parliament under sections 38 and 42 of the LIA.

 

Regulation Impact Statement (RIS)

The amendment benefits Aviation Australia, and relevant AME candidates, and will not increase costs for, or impose any additional requirements on, the aviation industry. Therefore, the Office of Best Practice Regulation (OBPR) does not require a RIS for the Specification amendment because a preliminary assessment of the business compliance costs indicates that the Specification amendment will have only a nil to low impact on business.

 

Consultation, making and commencement

Consultation under section 17 of the LIA has not been undertaken in this case other than with Aviation Australia. The new examination credit that is being introduced is beneficial to both Aviation Australia, and relevant AME candidates. The instrument comes into effect at the start of the day after it is registered. It has been made by the Deputy Director of Aviation Safety, a delegate of CASA under regulation 7 of CAR 1988.

 

[Instrument number CASA 550/09]

Overview

The Civil Aviation Order 100.94, enacted in 2010, addresses the need to streamline the process for aircraft maintenance engineer (AME) licence examinations in the electrical category, particularly by introducing credits for relevant training already completed. The Civil Aviation Order (CAO) was made under the authority of the Civil Aviation Act 1988, which empowers the Governor-General to issue regulations concerning aviation safety. The policy objective behind this amendment is to recognise the comprehensive training provided by Aviation Australia’s Module 10, Aviation Legislation, thereby reducing redundancy in the examination process for AME candidates. By allowing credits for this module, the CAO aims to streamline the qualification process, recognising that successful completion of Module 10 sufficiently demonstrates the necessary knowledge in Airworthiness Administration. This amendment does not impose additional costs or requirements on the aviation industry and is intended to benefit both Aviation Australia and the AME candidates.

Scope and Application

The Civil Aviation Order 100.94 pertains to the examinations required for individuals seeking to obtain or endorse a maintenance engineer licence (AME licence) in the electrical category under the Civil Aviation Act 1988. This Act applies to the issuance and endorsement of AME licences and the examinations necessary for qualification, specifically targeting individuals and entities involved in aircraft maintenance activities within Australia. The jurisdiction of the Act encompasses the entire Commonwealth of Australia, with its regulatory reach extending to all maintenance engineers who require an AME licence in the electrical category. The Act specifies that only qualified persons who have passed the requisite examinations can apply for these licences. However, it does not explicitly mention exclusions or thresholds, instead focusing on the detailed specifications for the required examinations, which are outlined in subordinate instruments such as CAO 100.94. The examination process is further refined by additional regulations and specifications, allowing for credits and waivers under certain conditions, as detailed in Schedule 1 of the Specification. This amendment to the Specification recognises credits for successful completion of related courses, such as Module 10, Aviation Legislation, thereby streamlining the qualification process for candidates who have already demonstrated relevant knowledge through other recognised training programs.

Key Provisions

The Civil Aviation Order 100.94, particularly its Amendment CASA 289/06, sets forth specific provisions regarding the examinations necessary for obtaining an aircraft maintenance engineer (AME) licence in the electrical category and for endorsing ratings on such a licence. These provisions are detailed in Schedule 1, where the examinations are categorised into core subjects, specific group subjects, and specific aircraft type examinations (subsection 6). Core subjects are mandatory for all applicants, while specific group subjects and aircraft type examinations are contingent on the particular rating sought by the applicant. Clause 4 of Schedule 1 also outlines the examination credits available and conditions under which certain examinations may be waived. Entities and individuals governed by this Act must ensure that applicants for AME licences or ratings meet the specified examination requirements. This involves demonstrating knowledge through successful completion of the relevant core subjects, group subjects, and aircraft type examinations, as applicable. Additionally, the amendment to section 4 of the Specification recognises credits for the Airworthiness Administration subject if the candidate has completed Module 10, Aviation Legislation, and has been trained and examined by a recognised organisation approved by CASA for this purpose. Failure to comply with the examination requirements stipulated in the amended Specification may result in the denial of an AME licence or the endorsement of a rating. While the amendment itself does not introduce new offences or penalties, the broader legislative framework under which these provisions operate could result in sanctions for non-compliance with related regulations and requirements. As a legislative instrument, the Specification and its amendments are subject to the Legislative Instruments Act 2003, which mandates tabling and disallowance in the Parliament. The amendment to the Specification, by introducing a new examination credit for Airworthiness Administration, is considered to have a nil to low impact on business, thereby not necessitating a Regulation Impact Statement. The amendment was made by the Deputy Director of Aviation Safety, a delegate of CASA, and comes into effect on the day following its registration.

Legal classification tags

Area of Law
Administrative Law
Aviation Law
Instrument
Regulation
Concepts
Definitions & Interpretation
Regulatory Standards
Licensing & Registration
Compliance Obligations

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.