CASA 547/09 – Amendment of instrument CASA 286/06 - Specification – examinations for aircraft maintenance engineer licence category airframes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2010L00073 Not in force Legislative Instrument

Legislation content

Explanatory Statement

Civil Aviation Order 100.91

Amendment of instrument CASA 286/06 — Specification – examinations for aircraft maintenance engineer licence category airframes

 

Legislation

Section 98 of the Civil Aviation Act 1988 (the Act) empowers the Governor-General to make regulations for the Act and the safety of air navigation.

 

CASA issues aircraft maintenance engineer licences (AME licences) under regulation 31 of the Civil Aviation Regulations 1988 (CAR 1988). Licences are endorsed with 1 or more work categories which describe the areas in which the privileges of the licence may be exercised. These categories are airframes, engines, radio, electrical and instruments.

 

Under regulation 31B of CAR 1988, the privileges conferred by an AME licence for a particular category are further refined by means of ratings which are also endorsed on the licence. The Civil Aviation Orders (CAOs) may specify ratings and the maintenance activities covered by them, for example, CAO 100.91 for the category airframes, CAO 100.92 for the category engines, CAO 100.93 for the category radio, CAO 100.94 for the category electrical, and CAO 100.95 for the category instruments.

 

Only a qualified person may apply to CASA for the issue of an AME licence. A qualified person means a person who has passed the required examinations. Under subregulation 5 (1) of CAR 1988, the required examinations may be prescribed in CAOs.

 

Under regulation 31C of CAR 1988, examinations for particular ratings may be prescribed in CAOs. Under subsection 6 of CAO 100.91, for the grant of a licence, or the endorsement of a rating, applicants must pass the relevant examinations specified by CASA.

 

Specification

Specification – examinations for aircraft maintenance engineer licence category airframes (the Specification) contains the operative provisions for examinations for an AME licence in the airframes category, and the examinations for the endorsement of ratings on the licence.

 

As explained and applied by a series of provisions in Schedule 1 of the Specification, the table in Schedule 1 lists the relevant examinations by reference to the core subjects, specific group subjects and specific aircraft type examinations. All core subjects are generally mandatory. Specific group subjects are required depending on the rating which a person seeks to have endorsed on the licence. Specific aircraft type examinations are required if the person seeks a rating for that specific aircraft type.

 

The provisions in clause 4 of Schedule 1 describe the examination credits that may be available to an applicant, and provide for certain written or oral examinations to be waived if conditions are met.

 

Aviation Australia

Aviation Australia Pty Ltd (Aviation Australia) is an Australian proprietary company incorporated in Queensland with shares held on behalf of the State. The shareholder of Aviation Australia is the Minister for Education and Training, in trust, on behalf of the State of Queensland, and the Minister appoints the Board of Directors. Through the Aviation Australia Advisory Forum, Aviation Australia consults with the aviation industry in developing Aviation Australia’s programs.

 

Aviation Australia is a recognised organisation for the training and examination of candidates wishing to qualify for maintenance authorities (MAs) under CAO 100.66. Among the mandatory

 

courses required for an MA is Module 10, Aviation Legislation, in Part 3, Appendix 4 of CAO 100.66. This course involves detailed training and examination in the Australian aviation regulatory framework for a wide range of relevant activities, including aircraft maintenance certification, type certification, commercial responsibilities, airworthiness and equipment requirements, and associated documentation requirements.

 

Specification Amendment 1 — Airworthiness Administration

One of the core subjects required for an AME licence under the Specification is Airworthiness Administration (code AA), a course in which the examination is similar to, though not quite as exacting as, Module 10. Currently, an MA holder who has successfully completed Module 10 and who wishes to qualify as an AME holder must also pass the examination in Airworthiness Administration because under the Specification no credit is recognised for Module 10.

 

Aviation Australia has developed its Module 10 course for MA candidates in such a way that CASA is satisfied that it offers an even more effective method of training and examination in the subject matters of Airworthiness Administration. Other recognised organisations may also achieve this outcome.

 

To recognise this, CASA has amended section 4 of the Specification to provide an AME candidate with a credit for Airworthiness Administration if the candidate has knowledge of Module 10, Aviation Legislation, in Part 3, Appendix 4 of CAO 100.66, and has demonstrated the knowledge by successful examination for clause 13 of CAO 100.66, and his or her knowledge training and examination were conducted by a recognised organisation under CAO 100.66 that is specifically approved in writing for this purpose.

 

CASA approval is dependent on CASA’s satisfaction that, through Module 10, the recognised organisation can train and examine in the comprehensive specifics of Airworthiness Administration for a licence group. This is the case for Aviation Australian and a separate approval instrument will be issued for that organisation as a result of the Specification Amendment.

 

Specification Amendment 2 — Structural Composites

Another one of the core subjects required for an AME licence for certain licence groups under the Specification is Structural Composites (for example for Group 7, aircraft of fibre reinforced plastic composite construction, and certain very large aeroplane types (Group 20)).

Aviation Australia has specifically developed a course of training and examination, to CASA’s satisfaction, that is an alternative to examination in Structural Composites for an AME licence group. To recognise this, CASA has amended section 4 of the Specification to provide that a candidate for an AME licence in the relevant category is not required to pass the examination in Structural Composites (code FP) for a licence group in category airframes, if the person has successfully completed training and examination in Course AA-27, Composites Repair Techniques (Theory), and the training and examination were conducted by Aviation Australia in its capacity as the holder of a Certificate of Approval for such training and examination under regulation 30 of CAR 1988.

 

This amendment is specifically for category airframes and not in any of the other categories. Therefore, this Specification Amendment appears only in this instrument for CAO 100.91.

 

Legislative Instruments Act

Under subsection 5 (1) of the Legislative Instruments Act 2003 (the LIA), if an instrument is of a legislative character and made in the exercise of a power delegated by the Parliament, it is a legislative instrument for the purposes of the LIA. Because of its prescriptive character, the Specification, and any Specification Amendment is considered to be a legislative instrument and is, therefore, subject to tabling and disallowance in the Parliament under sections 38 and 42 of the LIA.

Regulation Impact Statement (RIS)

The amendment benefits Aviation Australia, and relevant AME candidates, and will not increase costs for, or impose any additional requirements on, the aviation industry. Therefore, the Office of Best Practice Regulation (OBPR) does not require a RIS for the Specification amendment because a preliminary assessment of the business compliance costs indicates that the Specification amendment will have only a nil to low impact on business.

 

Consultation, making and commencement

Consultation under section 17 of the LIA has not been undertaken in this case other than with Aviation Australia. The 2 new examination credits that are being introduced are beneficial to both Aviation Australia, and relevant AME candidates. The instrument comes into effect at the start of the day after it is registered. It has been made by the Deputy Director of Aviation Safety, a delegate of CASA under regulation 7 of CAR 1988.

 

[Instrument number CASA 547/09]

Overview

The Civil Aviation Order 100.91, enacted as part of the Civil Aviation Act 1988, addresses the need for streamlined and efficient processes in obtaining aircraft maintenance engineer (AME) licences, particularly in the airframes category. This regulation, issued by the Civil Aviation Safety Authority (CASA), aims to refine the requirements for examinations and endorsements on AME licences, ensuring that candidates who have already demonstrated competence in certain areas do not need to repeat this knowledge. The legislation empowers CASA to specify the examinations necessary for granting and endorsing AME licences, including the introduction of credits for previously completed relevant examinations. This amendment, which allows credits for knowledge already demonstrated through other recognised training programs, seeks to reduce redundancy and enhance efficiency in the certification process, ultimately supporting the safety and quality of aviation maintenance practices. The objective of this legislative amendment, as expressed in the accompanying explanatory statement, is to streamline the process for AME licence holders by recognising prior knowledge and examinations conducted by approved training organisations. By allowing credits for certain examinations, the amendment seeks to alleviate unnecessary burdens on candidates without compromising safety standards. The legislative character of this instrument, as stipulated in the Legislative Instruments Act 2003, necessitates its tabling and disallowance in Parliament. Although a Regulation Impact Statement was not required due to the minimal impact on business compliance costs, the amendment was developed in consultation with Aviation Australia, a recognised organisation in the field, to ensure the continued high standards of aviation safety and training.

Scope and Application

The Civil Aviation Order 100.91, which pertains to the examinations for an aircraft maintenance engineer (AME) licence in the airframe category, applies to individuals who are applying for an AME licence or seeking to have a rating endorsed on such a licence. The scope of the legislation encompasses the detailed specifications and requirements for the examinations necessary for the grant of a licence or endorsement of a rating, including core subjects, specific group subjects, and specific aircraft type examinations. This Order is a part of the Civil Aviation Regulations 1988 (CAR 1988), which are made under the Civil Aviation Act 1988 and enforced by the Civil Aviation Safety Authority (CASA). The Order specifies that only qualified persons, who have successfully passed the required examinations, may apply for an AME licence. Additionally, the Order allows for the recognition of examination credits for candidates who have completed relevant training and examinations through recognised organisations, such as Aviation Australia, thereby providing flexibility and acknowledging prior learning. The legislative framework is designed to ensure that candidates possess the necessary knowledge and skills to safely perform maintenance activities on aircraft airframes, thereby contributing to the overall safety and efficiency of air navigation in Australia. The amendments introduced to the Order, such as providing credit for knowledge demonstrated through successful completion of Module 10, Aviation Legislation, and offering an alternative to examination in Structural Composites, aim to streamline the licensing process while maintaining high standards of competency and safety.

Key Provisions

The Civil Aviation Order 100.91, which pertains to examinations for aircraft maintenance engineer licence category airframes, primarily outlines the specifications and requirements for these examinations (sections 4 and 6). The Specification sets forth the mandatory core subjects, specific group subjects, and specific aircraft type examinations that applicants must pass to obtain an AME licence in the airframes category. Core subjects are generally mandatory, while specific group subjects and aircraft type examinations depend on the particular rating the applicant seeks. The provisions in clause 4 of Schedule 1 describe the examination credits that may be available, and provide for certain written or oral examinations to be waived if specific conditions are met. Under this Act, the obligations imposed on the parties or entities it governs include the requirement for applicants to pass the relevant examinations specified by the Civil Aviation Safety Authority (CASA) (subsection 6). Candidates must demonstrate proficiency in the core subjects, specific group subjects, and specific aircraft type examinations as outlined in the Specification. Additionally, Aviation Australia, as a recognised organisation for training and examination, must ensure that its courses align with the requirements of the Specification and meet CASA's standards for approval. CASA, in turn, is responsible for overseeing the implementation of the Specification and ensuring that recognised organisations comply with the requirements. The Act does not explicitly outline specific offences, penalties, or civil/criminal consequences for breach. However, failure to pass the required examinations or non-compliance with the Specification's provisions may result in the denial of an AME licence or the endorsement of a rating. Recognised organisations that do not adhere to the training and examination standards set forth in the Specification may face regulatory action from CASA, which could include revocation of approval or other enforcement measures. The consequences for individuals or organisations failing to comply with the requirements of the Specification can include the inability to obtain or maintain an AME licence, potentially impacting their ability to work in the aviation industry.

Legal classification tags

Area of Law
Administrative Law
Instrument
Regulation
Concepts
Definitions & Interpretation
Delegated & Subordinate Legislation
Reporting & Disclosure Obligations
Compliance Obligations

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.