Australia New Zealand Food Standards Code – Standard 1.2.10 – Information requirements – characterising ingredients and components of food

Administered by Department of Health, Disability and Ageing

Legislation au F2015L00398 In force Legislative Instrument

Legislation content

Standard 1.2.10 Information requirements characterising ingredients and components of food

Note 1 This instrument is a standard under the Food Standards Australia New Zealand Act 1991 (Cth). The standards together make up the Australia New Zealand Food Standards Code. See also section 1.1.1—3.

Note 2 The provisions of the Code that apply in New Zealand are incorporated in, or adopted under, the Food Act 2014 (NZ). See also section 1.1.1—3.

1.2.10—1 Name

  This Standard is Australia New Zealand Food Standards Code Standard 1.2.10 Information requirementscharacterising ingredients and components of food.

 Note Commencement:
This Standard commences on 1 March 2016, being the date specified as the commencement date in notices in the Gazette and the New Zealand Gazette under section 92 of the Food Standards Australia New Zealand Act 1991 (Cth). See also section 93 of that Act.

1.2.10—2 Definitions

Note Section 1.1.2—4 (Definition of characterising component and characterising ingredient) provides as follows:

 (1) In this Code, in relation to a food for sale:

  characterising component means a component of the food that:

 (a) is mentioned in the name of the food; or

 (b) is usually associated with the name of the food by a consumer; or

 (c) is emphasised on the label of the food in words, pictures or graphics.

  characterising ingredient means an ingredient or a category of ingredients of the food that:

 (a) is mentioned in the name of the food; or

 (b) is usually associated with the name of the food by a consumer; or

 (c) is emphasised on the label of the food in words, pictures or graphics.

 (2) Despite subsection (1), any of the following is not a characterising ingredient:

 (a) an ingredient or category of ingredients that is used in small amounts to flavour the food; or

 (b) an ingredient or category of ingredients that comprises the whole of the food; or

 (c) an ingredient or category of ingredients that is mentioned in the name of the food but which is not such as to govern the choice of the consumer, because the variation in the amount is not essential to characterise the food, or does not distinguish the food from similar foods.

 (3) Compliance with labelling requirements elsewhere in this Code does not of itself constitute emphasis for the purposes of this section.

1.2.10—3 Requirement to declare characterising ingredients and components

 (1) For the labelling provisions, information about *characterising ingredients and *characterising components is a declaration of the proportion of each characterising ingredient and characterising component of the food:

 (a) calculated in accordance with sections 1.2.10—4 to 1.2.10—7; and

 (b) expressed in accordance with section 1.2.10—8.

 (2) If:

 (a) the proportion of a *characterising component of a food is declared in accordance with this Standard; and

 (b) an ingredient or category of ingredients contains that characterising component;

  the proportion of a *characterising ingredient containing that characterising component does not need to be declared.

 (3) For the labelling provisions, information about *characterising ingredients and *characterising components is not required for the following:

 (a) prepared filled rolls, sandwiches, bagels or similar products;

 (b) a food for sale that is sold at a *fund-raising event;

 (c) a food for sale that is in a *small package;

 (d) infant formula product;

 (e) cured and/or dried meat flesh in whole cuts or pieces;

 (f) a standardised alcoholic beverage;

 (g) a beverage containing no less than 0.5% alcohol by volume, other than one referred to in paragraph (f).

 Note The labelling provisions are set out in Standard 1.2.1.

1.2.10—4 Method of calculating proportion of characterising ingredients

 (1) Subject to sections 1.2.10—5 and 1.2.10—6, the proportion, PCI, of a *characterising ingredient must be calculated using the following equation:

  

where:

IW is:

 (a) if the proportion of the characterising ingredient is declared in accordance with paragraph 1.2.10—8(4)(b)—the minimum ingoing weight of that ingredient; or

 (b) otherwise—the ingoing weight of the characterising ingredient.

TW is the total weight of all ingoing ingredients.

 (2) The weight of added water or volatile ingredients removed during the course of manufacture of the food must not be included in the weight of the ingoing ingredients when calculating PCI.

 (3) If a concentrated or dehydrated ingredient or category of ingredients is reconstituted during manufacture of the food, the weight of the reconstituted ingredient or category of ingredients may be used when calculating PCI.

 (4) If a food requires reconstitution prior to consumption, PCI may be calculated as a proportion of the food as reconstituted.

1.2.10—5 Calculating proportion of characterising ingredients where moisture loss occurs

  If moisture loss occurs in the processing of a food, the proportion of a characterising ingredient in the food may be calculated taking into account any such moisture loss, on the basis of the weight of the characterising ingredient in the food.

1.2.10—6 Calculating proportion of characterising ingredient or characterising component where proportion is declared in nutrition information panel

  Unless otherwise specified, where the proportion of a *characterising ingredient is declared in a nutrition information panel, the amount declared must be the *average quantity of the characterising ingredient present in the food.

1.2.10—7 Method of calculating proportion of characterising components

 (1) The proportion of a *characterising component, PCC, in a food must be calculated using the following equation:

  

where:

TW is the total weight of the food.

W is:

 (a) the weight of the characterising component of the food; or

 (b) if the proportion of the characterising component is declared in accordance with paragraph 1.2.10—8(4)(b)—the minimum weight of that component.

 (2) If a food requires reconstitution prior to consumption, PCC may be calculated as a proportion of the food as reconstituted.

1.2.10—8 Declaration of characterising ingredients and components

 (1) The proportion of a *characterising ingredient or *characterising component must:

 (a) be declared as a percentage; or

 (b) unless otherwise specified, be declared as the *average quantity per serving and per unit quantity, when declared in a nutrition information panel.

 (2) If the proportion of a *characterising ingredient is declared in accordance with paragraph (1)(a) in a statement of ingredients, the percentage must immediately follow the common, descriptive or generic name of the ingredient.

 (3) The percentage may be rounded to:

 (a) the nearest whole number; or

 (b) if the percentage is below 5%—the nearest 0.5 decimal place.

 (4) The proportion of a *characterising ingredient or *characterising component must be declared as:

 (a) the actual percentage; or

 (b) if the minimum weight of a characterising ingredient or characterising component was used when performing the calculation in section 1.2.10—4 or 1.2.10—7 as appropriate—a minimum percentage; or

 (c) unless otherwise specified—the *average quantity when declared in a nutrition information panel.

 (5) If a minimum percentage is declared, that fact must be clearly indicated.

 (6) The proportion of a *characterising ingredient or *characterising component of a food that requires reconstitution prior to consumption may be declared as a percentage of the food as reconstituted if:

 (a) in the case of a characterising ingredient—the proportion of the characterising ingredient was calculated in accordance with subsection 1.2.10—4(4); and

 (b) in any case—the fact that the ingredient or component is a proportion of the food as reconstituted is clearly indicated.

____________________


Amendment History

The Amendment History provides information about each amendment to the Standard. The information includes commencement or cessation information for relevant amendments.

 

These amendments are made under section 92 of the Food Standards Australia New Zealand Act 1991 unless otherwise indicated. Amendments do not have a specific date for cessation unless indicated as such.

 

About this compilation

 

This is compilation No. 2 of Standard 1.2.10 as in force on 29 November 2018 (up to Amendment No. 182). It includes any commenced amendment affecting the compilation to that date.

 

Prepared by Food Standards Australia New Zealand on 29 November 2018.

 

Uncommenced amendments or provisions ceasing to have effect

 

To assist stakeholders, the effect of any uncommenced amendments or provisions which will cease to have effect, may be reflected in the Standard as shaded boxed text with the relevant commencement or cessation date. These amendments will be reflected in a compilation registered on the Federal Register of Legislation including or omitting those amendments and provided in the Amendment History once the date is passed.

 

 

The following abbreviations may be used in the table below:

 

ad = added or inserted am = amended

exp = expired or ceased to have effect rep = repealed

rs = repealed and substituted

 

Standard 1.2.10 was published in the Food Standards Gazette No. FSC96 on 10 April 2015 as part of Amendment 154 (F2015L00398 –- 31 March 2015) and has since been amended as follows:

 

Clause affected

A’ment No.

FRL registration

Gazette

Commencement

(Cessation)

How affected

Description of amendment

1.2.103(2)

157

F2015L01374

1 Sept 2015

FSC99

3 Sept 2015

1 March 2016

 

am

Correction of typographical error.

1.2.103(3)

182

F2018L01594

23 Nov 2018

FSC123

29 Nov 2018

29 Nov 2018

am

Correction of typographical error.

 

Overview

The Food Standards Australia New Zealand Act 1991 (Cth) was enacted to provide for the establishment of Food Standards Australia New Zealand and the development of food standards to ensure that food is safe and correctly characterised and described. This Act was introduced to address the need for consistent food standards across Australia and New Zealand. The Food Standards Australia New Zealand Act 1991 was enacted by the Commonwealth Parliament and its policy objective is to protect public health and safety by ensuring that food is safe, correctly characterised, and accurately described. The Act facilitates the creation of the Australia New Zealand Food Standards Code, which includes specific standards such as Standard 1.2.10—Information requirements – characterising ingredients and components of food. This standard, which commenced on 1 March 2016, specifies the requirements for declaring the proportion of characterising ingredients and components in food, ensuring consumers have access to clear and accurate information about the food they purchase.

Scope and Application

The Australia New Zealand Food Standards Code – Standard 1.2.10 – Information requirements – characterising ingredients and components of food applies to all foods for sale in Australia and New Zealand, setting out the mandatory information requirements for the labelling of characterising ingredients and components in food products. The standard applies to entities involved in the manufacture, sale, or distribution of food, requiring them to declare the proportion of each characterising ingredient and component on the food label. Exemptions apply to certain food types, such as prepared filled rolls, sandwiches, bagels, foods sold at fund-raising events, small packaged foods, infant formula products, cured and dried meat flesh, standardised alcoholic beverages, and beverages containing no less than 0.5% alcohol by volume. The standard also provides specific methods for calculating the proportion of characterising ingredients and components, taking into account factors such as moisture loss during processing and the use of concentrated or dehydrated ingredients. The Act extends its application through subordinate instruments, which can further refine or expand upon the requirements of the standard.

Key Provisions

This legislative instrument, Standard 1.2.10 Information requirements – characterising ingredients and components of food, is a part of the Australia New Zealand Food Standards Code under the Food Standards Australia New Zealand Act 1991 (Cth). It sets out the requirements for the declaration of characterising ingredients and components on food labels. This Standard applies to the labelling of food for sale, except in certain specified circumstances such as food sold at fundraising events, in small packages, or infant formula products (section 1.2.10—3). The Standard requires food businesses to declare the proportion of each characterising ingredient and component in their products, calculated according to specified methods and expressed as a percentage or average quantity (section 1.2.10—4 to 1.2.10—8). Notably, the proportion of a characterising ingredient does not need to be declared if the proportion of a characterising component containing that ingredient is declared (section 1.2.10—3(2)). Food businesses governed by this Standard must ensure that the proportion of characterising ingredients and components is accurately calculated and declared on food labels. This involves determining the ingoing weight of the ingredients and components, excluding added water or volatile ingredients removed during manufacturing, and adjusting for moisture loss if applicable (section 1.2.10—4 to 1.2.10—7). If a food requires reconstitution before consumption, the proportions can be calculated based on the reconstituted food (section 1.2.10—4(4) and 1.2.10—7). The proportion must be declared as a percentage or average quantity, and if a minimum percentage is declared, this must be clearly indicated (section 1.2.10—8). Failure to comply with the labelling requirements set out in this Standard may result in legal consequences. Under the Food Standards Australia New Zealand Act 1991, non-compliance with the Code can lead to civil penalties, including fines. The maximum penalty for contravening a provision of the Code is generally aligned with the penalties for breaches of state or territory food laws, which can include fines of up to AUD 165,000 for corporations and AUD 33,000 for individuals, depending on the severity and circumstances of the offence. In addition to civil penalties, businesses may face criminal charges for serious or repeated breaches, which can result in fines and imprisonment. These penalties are designed to enforce compliance and protect consumer interests by ensuring accurate and transparent food labelling.

Legal classification tags

Area of Law
Food Law
Instrument
Legislative Instrument
Concepts
Definitions & Interpretation
Regulatory Standards
Reporting & Disclosure Obligations

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.