Airworthiness Directives 2004 - Revocation and Remaking - Piper PA-32 (Cherokee Six) Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07959 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 Piper PA-32 (Cherokee Six) Series Aeroplanes

 AD Name AD Number

 CANCELLED AD/PA-32/1

 Rudder Trim Installation - Modification AD/PA-32/2

 Windshield Collar - Replacement AD/PA-32/3

 Fuel Tanks - Inspection AD/PA-32/4 Amdt 1

 Aileron and Stabilator Balance Weight Assembly and Rudder Horn Assembly -  AD/PA-32/5 Amdt 3

 CANCELLED AD/PA-32/6 Amdt 3

 CANCELLED AD/PA-32/7

 Engine Air Inlet Duct - Inspection AD/PA-32/8 Amdt 1

 Aileron Spar AD/PA-32/9 Amdt 1

 Fuel System Improvements - Modification AD/PA-32/10

 Wing Rear Spar Attach Bolts - Inspection AD/PA-32/11

 Brake Disc - Replacement AD/PA-32/12

 Fuel System - Modification AD/PA-32/13

 Superseded by AD/GENERAL/45 - CANCELLED AD/PA-32/14

 Rudder Trim Arm Assembly Cracking AD/PA-32/15 Amdt 2

 Control Wheel Retaining Pin - Modification AD/PA-32/16

 Control Wheel - Inspection AD/PA-32/17 Amdt 4

 Fuel Selector Valve - Modification AD/PA-32/18

 Stabilator Balance Weight Tube Assembly AD/PA-32/19 Amdt 3

 Seat Frame - Modification AD/PA-32/20

 Seat Belt Attachment - Modification AD/PA-32/21

 Pitch Trim Switch - Modification AD/PA-32/22

 Front Seat Restraint Installations - Modification AD/PA-32/23

 Main Landing Gear Torque Links - Inspection AD/PA-32/24 Amdt 1

 Stabilator Hinge Attaching Bolts AD/PA-32/25 Amdt 2

 Stabilator - Inspection and Drilling of Drain Holes AD/PA-32/26

 Wing Rear Spar Inspection AD/PA-32/27 Amdt 2

 Air Induction Hose System - Modification AD/PA-32/28

 Rudder Bar Assembly - Inspection and Modification AD/PA-32/29


 Stall Warning Light - Relocation AD/PA-32/30

 Automatic Pilot Servo Roll Shear Pin - Installation AD/PA-32/31

 Outer Wing Spar - Inspection AD/PA-32/32

 Air Conditioning System - Modification AD/PA-32/33

 Main Landing Gear Cylinder Cracking AD/PA-32/34 Amdt 1

 Nose Landing Gear - Inspection and Modification AD/PA-32/35

 Fuel Valve - Replacement AD/PA-32/36

 Forward Baggage Door - Inspection AD/PA-32/37

 Quick Disconnect Seat Retention Mechanism - Inspection AD/PA-32/38

 Fuel Line - Inspection AD/PA-32/39 Amdt 1

 Nose Landing Gear Trunnion - Inspection AD/PA-32/40

 Pre-Certification Requirements - Modification AD/PA-32/41

 Wing Structural Fatigue Life Limitation AD/PA-32/42 Amdt 1

 Fuel Selector Valve - Inspection and Replacement AD/PA-32/43

 Throttle Linkage Bolt - Replacement AD/PA-32/44

 Lower Cowl Drain - Inspection and Modification AD/PA-32/45

 Fuel Selector Valve - Inspection AD/PA-32/46

 Fuel Filler Cap - Inspection and Replacement AD/PA-32/47

 Fuel Line - Inspection AD/PA-32/48

 Fuel Tank Vent - Inspection and Modification AD/PA-32/49

 Fuel Selector Control System - Modification AD/PA-32/50

 Fuel Line - Modification AD/PA-32/51

 Electric Pitch Trim Switch - Modification AD/PA-32/52

 Engine Control Rod End Bearings - Inspection and Replacement AD/PA-32/53

 Oil Coolers - Inspection and Replacement AD/PA-32/54 Amdt 2

 Engine Cowling - Drain Hole Provision AD/PA-32/55

 Steering System - Modification AD/PA-32/56

 Nose Landing Gear Retraction System - Modification AD/PA-32/57

 Glove Compartment - Modification AD/PA-32/58

 Control Column Stop - Modification AD/PA-32/59

 Manually Trippable Breaker for Pitch Trim Circuit - Installation AD/PA-32/60

 Stabilator Skin - Inspection AD/PA-32/61

 Nose Gear Actuator Rod End Bearing - Replacement AD/PA-32/62

 Turbocharger Exhaust System - Inspection AD/PA-32/63

 Fuel Flow Indicator Line - Replacement AD/PA-32/64

 Fuselage Firewall - Modification AD/PA-32/65


 Window Curtain Rod Support Area - Inspection AD/PA-32/66

 Rudder Skin - Inspection and Modification AD/PA-32/67

 Fuel Tank Vent and Vent Hose - Modification and Replacement AD/PA-32/68

 Rudder/Aileron Interconnect Bracket - Interference Inspection AD/PA-32/69

 Ammeter Installation Modification - CANCELLED AD/PA-32/70 Amdt 1

 Aileron Balance Weight Attachment - Inspection and Modification AD/PA-32/71

 Nose Landing Gear Downlock - Modification AD/PA-32/72

 Battery Strap Installation AD/PA-32/73

 Ammeter Installation AD/PA-32/74 Amdt 1

 Stabilator Attach Fitting Corrosion AD/PA-32/75

 Crossover Exhaust Assembly - CANCELLED AD/PA-32/76

 Aircraft Repair AD/PA-32/77

 Engine Mount and NLG Attachment AD/PA-32/78

 Main Landing Gear Side Brace Stud AD/PA-32/79 Amdt 1

 Flap Handle Attach Bolt AD/PA-32/80

 Engine Oil Cooler Hoses AD/PA-32/81 Amdt 1

 Engine Air Filter AD/PA-32/82 Amdt 1

 Control Wheel Attachment AD/PA-32/83

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.