Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Piper PA-28 Series Aeroplanes
AD Name AD Number
CANCELLED AD/PA-28/1
Rudder and Stabilator Control Cables, Installation of Fairleads - Modification AD/PA-28/2
CANCELLED AD/PA-28/3 Amdt 1
Control Wheel - Inspection AD/PA-28/4 Amdt 5
CANCELLED AD/PA-28/5
CANCELLED AD/PA-28/6
Magneto Radio Interference Filters - Modification AD/PA-28/7 Amdt 1
Rudder Trim Installation AD/PA-28/8
Battery Lead Attachment - Inspection and Modification AD/PA-28/9
Centre Safety Belt Attachment - Inspection AD/PA-28/10
CANCELLED AD/PA-28/11
CANCELLED AD/PA-28/12 Amdt 1
Aileron and Stabilator Balance Weight Assembly and Rudder Horn Assembly - AD/PA-28/13 Amdt 3
CANCELLED AD/PA-28/14 Amdt 3
CANCELLED AD/PA-28/15
Aileron Spar Cracking AD/PA-28/16 Amdt 2
CANCELLED AD/PA-28/17
Wing Rear Spar Attachment Bolts - Inspection AD/PA-28/18
CANCELLED AD/PA-28/19
CANCELLED AD/PA-28/20
Replaced by AD/GENERAL/45 - CANCELLED AD/PA-28/21
CANCELLED AD/PA-28/22
Rudder Trim Arm Assembly Cracking AD/PA-28/23 Amdt 2
Control Wheel Retaining Pin - Modification AD/PA-28/24
CANCELLED AD/PA-28/25 Amdt 1
CANCELLED AD/PA-28/26
Exhaust System - Inspection - CANCELLED AD/PA-28/27
Stabilator and Balance Weight Tube Assembly - Inspection AD/PA-28/28 Amdt 2
CANCELLED AD/PA-28/29
Engine Mount Tubes - Inspection AD/PA-28/30
Seat Frame - Modification AD/PA-28/31
Pitch Trim Switch - Modification AD/PA-28/32
Front Seat Restraint Installation - Modification AD/PA-28/33
CANCELLED AD/PA-28/34
Main Landing Gear Torque Links - Inspection AD/PA-28/35 Amdt 1
Stabilator Hinge Attaching Bolts - Inspection AD/PA-28/36
CANCELLED AD/PA-28/37
Stabilator Hinge Attaching Bolts - Inspection AD/PA-28/38
Stabilator - Inspection and Drilling of Drain Holes AD/PA-28/39
Wing Rear Spar - Inspection AD/PA-28/40 Amdt 1
Rapid Throttle Movement - Warning Placard AD/PA-28/41
CANCELLED AD/PA-28/42
Rudder Bar Assembly - Inspection and Modification AD/PA-28/43
Rear Seat Belt Attachment - Modification AD/PA-28/44
Gross Weight - Reduction AD/PA-28/45
Wing Reinforcement - Modification AD/PA-28/46
Automatic Pilot Roll Servo Shear Pin - Installation AD/PA-28/47
Outer Wing Spar - Inspection AD/PA-28/48
Air Conditioning System - Modification AD/PA-28/49
Main Landing Gear Cylinder Cracking - CANCELLED AD/PA-28/50 Amdt 1
Aileron Centring Cable - Inspection AD/PA-28/51
Nose Landing Gear - Inspection and Modification AD/PA-28/52
Pre-Certification Requirements - Modification AD/PA-28/53
Spin Prohibition Placard AD/PA-28/54
Fuel Valve - Replacement AD/PA-28/55
Quick-Disconnect Seat Retention Mechanism - Inspection AD/PA-28/56
Nose Landing Gear Trunnion - Inspection AD/PA-28/57
Wing Structural Fatigue Life Limitation AD/PA-28/58
Fuel Selector Valve - Inspection and Replacement AD/PA-28/59
Carburettor Air Filter Box - Modification AD/PA-28/60
Lower Cowl Drain - Inspection and Modification AD/PA-28/61
Fuel Selector Valve - Inspection AD/PA-28/62
Fuel Filler Cap - Inspection and Replacement AD/PA-28/63
Fuel Line - Inspection AD/PA-28/64
Fuel Tank Vent - Inspection and Modification AD/PA-28/65
Fuel Selector Control System - Modification AD/PA-28/66
Electric Pitch Trim Switch - Modification AD/PA-28/67
CANCELLED AD/PA-28/68
Engine Cowling - Drain Hole Provision AD/PA-28/69
Fuel Drain Cover - Replacement AD/PA-28/70
Nose Landing Gear Down Lock - Modification or Replacement AD/PA-28/71
Fuel Gascolator - Inspection AD/PA-28/72
Hose Assembly - Inspection and Modification AD/PA-28/73
Fuel and Vapour Return Lines - Modification AD/PA-28/74
Carburettor Nozzle - CANCELLED AD/PA-28/75 Amdt 1
Carburettor Nozzle - CANCELLED AD/PA-28/76 Amdt 1
Fuel Line Union Fittings - Inspection AD/PA-28/77
Fuel Tank Vent and Vent Hose - Modification and Replacement AD/PA-28/78
Exhaust Muffler Assembly - Inspection - CANCELLED AD/PA-28/79
Ammeter Installation Modification - CANCELLED AD/PA-28/80 Amdt 1
Fuel Filter Drain Valve - Replacement AD/PA-28/81
Rudder Torque Tube Attachment Fitting and Hardware - Inspection AD/PA-28/82
Battery Protection and Rear Seat Installation - Inspection AD/PA-28/83
Nose Landing Gear - Inspection and Modification Parts I and II AD/PA-28/84
Battery Strap Installation AD/PA-28/85
Ammeter Installation AD/PA-28/86 Amdt 1
Stabilator Attach Fitting Corrosion AD/PA-28/87
Aft Centre of Gravity Restriction AD/PA-28/88 Amdt 3
Aircraft Repair AD/PA-28/89
Nose Gear Drag Link AD/PA-28/90
Main Landing Gear Side Brace Stud AD/PA-28/91 Amdt 1
Landing Light Seal AD/PA-28/92 Amdt 1
Flap Handle Attach Bolt AD/PA-28/93
Engine Oil Cooler Hoses AD/PA-28/94 Amdt 1
Engine Air Filter AD/PA-28/95 Amdt 1
Control Wheel Attachment AD/PA-28/96