Airworthiness Directives 2004 - Revocation and Remaking - Piper PA-24 (Comanche) Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07954 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 Piper PA-24 (Comanche) Series Aeroplanes

 AD Name AD Number

 Battery Cables - Provision of Insulation Inside Battery Box AD/PA-24/1

 CANCELLED AD/PA-24/2

 Nose Wheel Steering Arm Mounting Bracket - Reinforcement AD/PA-24/3

 CANCELLED AD/PA-24/4

 CANCELLED AD/PA-24/5

 CANCELLED AD/PA-24/6

 Control Wheel Sprocket Mounting Hole - Inspection AD/PA-24/7

 Superseded by AD/PA-24/40 - CANCELLED AD/PA-24/8

 Control Tube Guide Blocks - Safety Wiring AD/PA-24/9

 CANCELLED AD/PA-24/10

 CANCELLED AD/PA-24/11

 Rubatex Blocks - Removal from Interior of Wing AD/PA-24/12

 CANCELLED AD/PA-24/13

 Exhaust System - Inspection AD/PA-24/14 Amdt 1

 CANCELLED AD/PA-24/15

 CANCELLED AD/PA-24/16 Amdt 1

 CANCELLED AD/PA-24/17

 Automatic Pilot - Pitch Servomotor - Modification AD/PA-24/18

 CANCELLED AD/PA-24/19

 CANCELLED AD/PA-24/20

 CANCELLED AD/PA-24/21 Amdt 2

 Baggage Door Latch - Inspection AD/PA-24/22

 CANCELLED AD/PA-24/23

 Propeller Inspection and Operating Instructions AD/PA-24/24

 Seat Frame - Modification AD/PA-24/25

 Pitch Trim Switch - Modification AD/PA-24/26 Amdt 1

 Front Seat Restraint Installations - Modification AD/PA-24/27

 Normal Operating and Never Exceed Speed Limitations - Reduction AD/PA-24/28 Amdt 1

 Rudder Balance Weight - Installation AD/PA-24/29


 Uncoordinated Manoeuvres - Warning Placard AD/PA-24/30 Amdt 1

 Landing Gear and Flap Assemblies - Inspection AD/PA-24/31

 Stabilator Attachment Bolts - Inspection AD/PA-24/32 Amdt 1

 Stabilator Torque Tube Bearing Block Attachment Fitting AD/PA-24/33 Amdt 3

 Automatic Pilot Roll Servo Shear Pin - Installation AD/PA-24/34

 Beryl Aviation Filtrator Assembly - Replacement AD/PA-24/35

 Fin Forward Spar Attachment - Inspection AD/PA-24/36

 Stabilator Balance Weight Tube - Replacement AD/PA-24/37

 Aileron Spar - Inspection and Modification AD/PA-24/38

 Fuel Selector Valve - Inspection AD/PA-24/39

 Aileron Nose Rib - Inspection and Modification AD/PA-24/40

 Wing Inspection for Fatigue Cracking AD/PA-24/41 Amdt 2

 Flap Extension Limitation - Warning Placard AD/PA-24/42

 Wing Main Spar Lower Cap - Inspection AD/PA-24/43

 Main Landing Gear Side Brace Stud AD/PA-24/44 Amdt 1

 Engine Air Filter AD/PA-24/45

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.