Airworthiness Directives 2004 - Revocation and Remaking - Partenavia P68 Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07940 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 Partenavia P68 Series Aeroplanes

 AD Name AD Number

 CANCELLED AD/P68/1

 Pre-Certification Requirements AD/P68/2 Amdt 2

 Engine Mount - Inspection AD/P68/3 Amdt 1

 Auxiliary Fuel Pump Drains - Inspection AD/P68/4

 Circuit Breaker Installation - Inspection AD/P68/5

 Rudder Trim Tab Control Rod P/N 68-506053 - Inspection AD/P68/6

 Ignition Switch Guard - Modification AD/P68/7

 Fuel Filter Bowl - Replacement AD/P68/8

 Superseded by AD/P68/17 - CANCELLED AD/P68/9

 Stabilator Balance Weight Attachment - Inspection and Modification AD/P68/10 Amdt 1

 Rudder Control Pulleys at Fuselage Frame No. 3 - Inspection AD/P68/11 Amdt 1

 Propeller Control Rod End - Inspection and Replacement AD/P68/12

 Longitudinal Trim Indicator - Check and Modification AD/P68/13 Amdt 2

 Fuel Pump Cooling Shroud - Modification AD/P68/14

 Fin, Rudder Upper Hinge Attachment Area - Modification AD/P68/15

 Engine and Engine Mount Attach Bolts AD/P68/16 Amdt 1

 Flap Actuator Switch - Inspection and Replacement AD/P68/17 Amdt 1

 Oil Cooler Elbow Fitting - Replacement AD/P68/18

 Control Wheel Shaft Universal Joint AD/P68/19 Amdt 2

 Flap Bellcrank Attachment Mounting Brackets - Inspection and Modification AD/P68/20 Amdt 1

 Horizontal Stabilator to Fuselage Frame Attachment - Check Torque AD/P68/21

 Wing Lower Front and Rear Spar Assemblies AD/P68/22 Amdt 4

 Aileron Control Cables - CANCELLED AD/P68/23 Amdt 2

 Fuel and Janitrol Lines AD/P68/24 Amdt 3

 Aileron Control Chain Connector - Inspection and Modification AD/P68/25

 Stabilator Travel Stop - Modification AD/P68/26

 Fibre Glass Leading Edges AD/P68/27

 Engine Mount Fittings AD/P68/28 Amdt 3

 Elevator Trim Tab AD/P68/29 Amdt 1


 Rudder Cables - CANCELLED AD/P68/30 Amdt 1

 Fuel Line Fire Sleeving - CANCELLED AD/P68/31

 Longitudinal Trim System AD/P68/32

 Engine and Propeller Control Cables AD/P68/33 Amdt 1

 Engine Mount AD/P68/34

 LH and RH Muffler Assemblies AD/P68/35

 Horizontal Tailplane AD/P68/36

 Frame No. 1 AD/P68/37

 Stabiliser Drive Horn AD/P68/38 Amdt 2

 Fuel Selector Valve AD/P68/39

 Stabilator Torque Tube Attachment Shelves, Flap and Aileron Hinge Shelves AD/P68/40

 IFR Instrument Panel Configuration AD/P68/41 Amdt 1

 Wing Upper Skin Stringers AD/P68/42

 Wing and Airframe - Fatigue Life Limit AD/P68/43 Amdt 4

 Flight Control Cables AD/P68/44

 Wing Spar Inspection AD/P68/45

 Engine Cowl AD/P68/46

 Aircraft Flight Manual, Flight into Icing Conditions AD/P68/47

 Nose Landing Gear Cracking AD/P68/48

 Landing Gear Attach Bolts AD/P68/49

 Flight Control AD/P68/50

 Flight Controls AD/P68/51

 Fuel Selector Control AD/P68/52

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.