Airworthiness Directives 2004 - Revocation and Remaking - GAF N22 and N24 Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07877 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 GAF N22 and N24 Series Aeroplanes

 AD Name AD Number

 CANCELLED AD/GAF-N22/1

 Retirement Lives - Fatigue Critical Components AD/GAF-N22/2 Amdt 3

 CANCELLED AD/GAF-N22/3

 Landing Gear Retraction System - Chain Replacement AD/GAF-N22/4

 Aileron Control System - Chain Replacement AD/GAF-N22/5

 Rudder and Stabiliser Trim Systems - Chain Replacement AD/GAF-N22/6

 Engine Oil Tank Replacement AD/GAF-N22/7

 CANCELLED AD/GAF-N22/8

 Fuel System Check Valves - Modification AD/GAF-N22/9

 Main Landing Gear - Inspection AD/GAF-N22/10

 Relocation of Pilot Seat Installations AD/GAF-N22/11 Amdt 1

 Rudder Control System - Inspection and Modification AD/GAF-N22/12 Amdt 1

 Fuel Crossfeed Selector Knob - Inspection and Replacement AD/GAF-N22/13 Amdt 1

 Engine Air Intake Fairing - Inspection AD/GAF-N22/14

 Engine Air Intake Fairing - Inspection and Rework AD/GAF-N22/15

 Horizontal Stabiliser Rivets - Inspection AD/GAF-N22/16 Amdt 1

 Horizontal Stabiliser Trim Tab System - Inspection and Modification AD/GAF-N22/17 Amdt 1

 Upper Engine Cowl Left Hand Stay - Removal AD/GAF-N22/18

 Rear Baggage Compartment, External Door - Placards AD/GAF-N22/19

 Hot Air Check Valve - Inspection and Modification AD/GAF-N22/20 Amdt 1

 Control Wheel Assembly Retaining Pin - Inspection AD/GAF-N22/21 Amdt 1

 Fuselage - Wing Centre Section Spar Support Bracket Attachment - Inspection AD/GAF-N22/22

 Rudder Pedal Guards - Modification AD/GAF-N22/23

 Audio System Modification AD/GAF-N22/24

 Air Intake Anti-Icing Valve - Inspection and Modification AD/GAF-N22/25

 Rudder Tab Mass Balance Hinge Pin - Inspection AD/GAF-N22/26

 Rudder Tab - Modification AD/GAF-N22/27

 Horizontal Stabiliser and Trim Tab System AD/GAF-N22/28 Amdt 4

 Horizontal Stabiliser - Weather Proofing AD/GAF-N22/29


 Horizontal Stabiliser Control System - Inspection for Wind Gust Damage AD/GAF-N22/30

 Control Wheel Gimbal Support Structure Tie Rod Attachment Plates -  AD/GAF-N22/31

 Trim Tab Hinge to Horizontal Stabiliser Attachment - Inspection AD/GAF-N22/32

 Rudder Structure and Trim Tab Control Rod - Inspection and Modification AD/GAF-N22/33

 Horizontal Stabiliser Gust Lock - Installation AD/GAF-N22/34

 Horizontal Stabiliser Trim Tab System - Modification AD/GAF-N22/35

 Horizontal Stabiliser - Modification AD/GAF-N22/36

 Rudder Control Torque Shaft Universal Joint - Inspection AD/GAF-N22/37

 Horizontal Stabiliser and Trim Tabs - Modification - CANCELLED AD/GAF-N22/38

 Horizontal Stabiliser Pivot Bracket Attachment - Inspection and Modification AD/GAF-N22/39 Amdt 1

 Fuel Tank Selector and Fuel Shut-Off Cables - Inspection AD/GAF-N22/40

 Emergency Exit Door Lock Mechanism - Inspection AD/GAF-N22/41

 Emergency Exit - External Label AD/GAF-N22/42

 Autopilot Aileron Servo Unit Bridle Cable Assembly P/N 1/N-45-1317 - Inspection AD/GAF-N22/43 Amdt 1

 Rudder Control Lever Shafts AD/GAF-N22/44 Amdt 2

 Revised Compliance Requirements for Embodiment of Nomad Service Bulletins  AD/GAF-N22/45

 Control Wheel Assembly - Inspection and Replacement AD/GAF-N22/46 Amdt 1

 Engine Air Intake Modification AD/GAF-N22/47

 Flap and Aileron Control Rod Fork Ends - Inspection AD/GAF-N22/48

 Emergency Exit - Modification AD/GAF-N22/49

 Fin Attachment Fittings AD/GAF-N22/50 Amdt 2

 Rudder Pedal Guard Plate AD/GAF-N22/51

 Stub Wing Upper Front Spar Cap AD/GAF-N22/52

 Taper Pins - Control Systems AD/GAF-N22/53

 D.C. Power - Generator Cable Termination AD/GAF-N22/54

 Rudder Pedal Guard Brush Seals AD/GAF-N22/55

 Rudder Pedal Pivot Arms AD/GAF-N22/56 Amdt 1

 Oxygen - Cabin Supply Pipe AD/GAF-N22/57

 Horizontal Stabiliser AD/GAF-N22/58 Amdt 5

 Engine Ground Running AD/GAF-N22/59 Amdt 1

 Horizontal Stabiliser Pivot Bearings and Brackets AD/GAF-N22/60

 Trim Tab Hinge AD/GAF-N22/61 Amdt 1

 Stub Fin AD/GAF-N22/62 Amdt 1

 Stub Fin Plate P/N 1D/N-12-57 AD/GAF-N22/63 Amdt 1

 Aileron Structure AD/GAF-N22/64

 Rear Fuselage Frame AD/GAF-N22/65 Amdt 3


 Stub Fin Ribs AD/GAF-N22/66 Amdt 2

 Flap Components - Retirement Lives AD/GAF-N22/67

 Horizontal Stabiliser - Main Spar and Upper Skin AD/GAF-N22/68

 Ailerons AD/GAF-N22/69 Amdt 4

 Wing Strut Upper End Fitting AD/GAF-N22/70 Amdt 2

 Landing Gear AD/GAF-N22/71

 Upper Fin Rear Attachment Points AD/GAF-N22/72

 Rudder Pedals Brake Push Rod AD/GAF-N22/73

 Left Wing Aft Wing Break Electrical Connector AD/GAF-N22/74 Amdt 1

 Horizontal Stabiliser Access Panel Intercostal Angles and Upper and Lower  AD/GAF-N22/75 Amdt 1

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.