Airworthiness Directives 2004 - Revocation and Remaking - DHC-2 (Beaver) Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07837 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 DHC-2 (Beaver) Series Aeroplanes

 AD Name AD Number

 Fuel Tanks Inspection and No Smoking Placards AD/DHC-2/1

 Hydraulic Control Unit - Selector Lever Hub Inspection AD/DHC-2/2

 Rudder Pedal Assembly - Modification AD/DHC-2/3

 Undercarriage Legs - Anti-Corrosion Treatment AD/DHC-2/4

 CANCELLED AD/DHC-2/5

 Safety Harness Inertia Reel - Installation AD/DHC-2/6

 Aileron Differential Mount - Modification AD/DHC-2/7

 Beaver Wing - Prevention of Flutter - Inspection AD/DHC-2/8

 Superseded by AD/DHC-2/10 - CANCELLED AD/DHC-2/9

 Lift Strut and Lift Strut Attachment Fittings AD/DHC-2/10 Amdt 8

 Aileron Hinge Arm - Inspection AD/DHC-2/11

 Left and Right Wing Intermediate Rib Assembly Stations 15.50, 29.00 and  AD/DHC-2/12 Amdt 2

 Wing - Inspection and Modification AD/DHC-2/13

 Main Undercarriage Lower Forward Attachment - Modification AD/DHC-2/14

 Main Undercarriage Lower Forward Bolt Attachment - Inspection AD/DHC-2/15 Amdt 1

 Aileron Centre Hinge Bracket - Inspection AD/DHC-2/16

 Fin Rear Attachment - Inspection AD/DHC-2/17

 Tailplane Rear Spar - Inspection and Modification AD/DHC-2/18

 Aileron Control Cables - Inspection AD/DHC-2/19 Amdt 1

 Control Column Torque Tubes - Inspection AD/DHC-2/20

 Flight Controls, Elevator Root Rib - Inspection AD/DHC-2/21

 Aileron Centre Hinge Bracket AD/DHC-2/22 Amdt 1

 Stabilising Fins AD/DHC-2/23 Amdt 1

 Wing Strut Assembly Lower Attachment Fittings AD/DHC-2/24 Amdt 3

 Horizontal Stabiliser Attachment Brackets AD/DHC-2/25

 Passenger Seats and Passenger Seat Attachment Fittings AD/DHC-2/26

 Horizontal Stabiliser Front Spar AD/DHC-2/27 Amdt 2

 Wing Strut Lower Steel End-Fitting AD/DHC-2/28

 Elevator Mass Balance Weight AD/DHC-2/29

 Front Fuselage Struts at Windshield AD/DHC-2/30 Amdt 1

 Fuselage Station 228 Bulkhead AD/DHC-2/31

 Magneto Cannon Plug AD/DHC-2/32

 Exhaust Collector Ring Segments AD/DHC-2/33

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.