Airworthiness Directives 2004 - Revocation and Remaking - DH 104 (Dove) Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07827 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 DH 104 (Dove) Series Aeroplanes

 AD Name AD Number

 Fire Protection Modifications - Engine Nacelles AD/DH 104/1

 Siebe Gorman Safety Belt - Modification AD/DH 104/2

 Wing Root Main Spar Lower Joint - Modification AD/DH 104/3

 Aileron Differential Pulley Stud - Modification AD/DH 104/4

 Wing and Centre Section Lower Spar Booms - Safe Lives AD/DH 104/5 Amdt 6

 Engine Mount Attachment Brackets - Inspection AD/DH 104/6 Amdt 1

 Fuselage - Inspection AD/DH 104/7

 Fin Attachment Brackets - Inspection AD/DH 104/8 Amdt 1

 Aileron, Rudder and Elevator Hinge Links and Brackets and Tailplane Upper  AD/DH 104/9

 Mainplane Upper and Lower Spar Booms - Inspection AD/DH 104/10 Amdt 1

 Engine Instrument Arrangement - Modification AD/DH 104/11

 Outer Mainplane - Inspection AD/DH 104/12 Amdt 2

 Crossed Aileron Control Cables - Inspection AD/DH 104/13

 Wing/Fuselage Lower Main Root Joint - Inspection AD/DH 104/14 Amdt 3

 Wing Lower Root Joint Fittings P/Nos. 4W 271 and 4W 5013 - Inspection AD/DH 104/15 Amdt 2

 Flap System Modification to Prevent Crossing of Pneumatic Lines AD/DH 104/16

 Aileron Lever - 4WA315 - Inspection and Modification AD/DH 104/17 Amdt 2

 Trim Tab Connecting Rod Eye End AD/DH 104/18 Amdt 1

 Engine Mounting Frames - Inspection AD/DH 104/19 Amdt 1

 Landing Gear Actuator Pistons - Inspections and Replacement AD/DH 104/20

 CANCELLED AD/DH 104/21

 CANCELLED AD/DH 104/22

 CANCELLED AD/DH 104/23

 Flap Datum Hinge Safety Washer - Inspection AD/DH 104/24

 Flap Datum Hinge Assembly - Inspection AD/DH 104/25 Amdt 1

 Rudder Control Pedal Reversal Lever - Inspection AD/DH 104/26

 Pneumatic System - Main Air Reservoirs AD/DH 104/27

 Engine Mounting Attachment Fittings - Inspection AD/DH 104/28

 Engine Mounting Frame - Inspection AD/DH 104/29


 Front Seat Restraint Installation - Modification AD/DH 104/30

 Drag Bracing Member, Centre Section Spar Lower Boom - Inspection and  AD/DH 104/31

 Main and Nose Undercarriage Radius Rod Adjusting Screws - Replacement AD/DH 104/32

 Nose Undercarriage Inner Casing - Inspection and Replacement AD/DH 104/33

 Centre Section Main Spar Top and Bottom Boom Joint - Inspection AD/DH 104/34 Amdt 2

 Aircraft Life Extension AD/DH 104/35 Amdt 1

 Engine Mounting Frame Front Engine Support Spigots - Inspection AD/DH 104/36

 Aileron Mass Balance Weight Assembly AD/DH 104/37

 Flap To Flap Jack Connecting Pin AD/DH 104/38

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.