Airworthiness Directives 2004 - Revocation and Remaking - De Havilland DHC-1 (Chipmunk) Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07825 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 De Havilland DHC-1 (Chipmunk) Series Aeroplanes

 AD Name AD Number

 Tailplane Bracket Bolt - Locking AD/DHC-1/1

 Engine Mount Pick-Up Points - Modification AD/DHC-1/2

 Fuel Line Cock to Filter - Replacement AD/DHC-1/3

 Undercarriage Torque Link Centre Hinge Joint - Modification AD/DHC-1/4

 Fuel System - Modification AD/DHC-1/5 Amdt 2

 Engine Mount Pick-Up Bolt - Inspection AD/DHC-1/6

 Tailplane Attachment Lugs and Bulkhead - Inspection AD/DHC-1/7

 Fairey-Reed Propeller - Spinner Removal AD/DHC-1/8

 Rudder Torque Tube Flange - Inspection AD/DHC-1/9

 Superseded by AD/DHC-1/15 AD/DHC-1/10

 Elevator Trim Tab Cable - Inspection AD/DHC-1/11

 Wing Spar Booms and Centre Section - Fatigue Life Limitation AD/DHC-1/12 Amdt 6

 Flap Return Spring/Flap Check Cable AD/DHC-1/13

 Flap Hinge Arms - Inspection and Modification AD/DHC-1/14

 Tail Landing Gear and Lower Surface of Tailplane - Inspection and Modification AD/DHC-1/15

 Tailwheel Yoke Attachment Bolt - Inspection AD/DHC-1/16

 CANCELLED AD/DHC-1/17

 Fuselage Centre Top Structure - Inspection and Modification AD/DHC-1/18

 Flap Layshaft and Operating Cam AD/DHC-1/19 Amdt 1

 CANCELLED AD/DHC-1/20

 Wing to Fuselage Attachment Links AD/DHC-1/21 Amdt 1

 Tailplane Structure AD/DHC-1/22 Amdt 2

 CANCELLED AD/DHC-1/23

 Engine Mounting Frames - Inspection - CANCELLED AD/DHC-1/24

 Wing Flap Inner Hinge Bracket and Reinforcing Channel AD/DHC-1/25 Amdt 1

 CANCELLED AD/DHC-1/26

 Seat Restraint Installations - Modification AD/DHC-1/27

 Undercarriage Mounting Casting AD/DHC-1/28 Amdt 8

 Tailplane Attachment Fittings AD/DHC-1/29 Amdt 2


 Engine Mount Upper Attachment Points/Reinforcing Plates AD/DHC-1/30 Amdt 1

 Fin Rear Spar AD/DHC-1/31 Amdt 1

 Fuselage Rear Bulkhead AD/DHC-1/32 Amdt 2

 Tailplane Support Struts AD/DHC-1/33 Amdt 1

 Shock Absorber Strut Piston Tube AD/DHC-1/34 Amdt 1

 Engine Mounting Frame Joints AD/DHC-1/35 Amdt 1

 Flap Operating Cables AD/DHC-1/36

 Engine Start Isolation Switch AD/DHC-1/37

 Re-Classification of Existing Modifications to Mandatory Status AD/DHC-1/38

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.