Airworthiness Directives 2004 - Revocation and Remaking - Brantly B-2 Series Helicopters

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07775 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 Brantly B-2 Series Helicopters

 AD Name AD Number

 Tail Rotor Guard and Skid Assembly P/N B2-416 - Modification AD/B-2/1

 Tail Rotor Drive - Modification AD/B-2/2

 Tail Rotor Drive - Inspection AD/B-2/3

 Tail Rotor Drive - Modification AD/B-2/4

 Tail Cone Reinforcement AD/B-2/5

 Overunning Clutch - Modification and Cockpit Placard Amendment AD/B-2/6

 Main Rotor Blade Dampers - Installation AD/B-2/7

 Tail Cone Reinforcement AD/B-2/8

 Main Transmission Mount - Reinforcement AD/B-2/9

 Rotor Blade Hinge - Modification AD/B-2/10

 Tail Rotor Blade Retaining Nut - Safetying AD/B-2/11

 Main Transmission Forward Mount - Rework AD/B-2/12

 Tail Rotor Guard - Inspection AD/B-2/13

 Rod End Bearings (Old Type KAHR. HE3SFN) on Forward End of U/C Drag  AD/B-2/14

 Superseded by AD/B-2/23 AD/B-2/15

 Centrifugal Clutch - Inspection Cockpit Placard - Installation AD/B-2/16

 Elimination of Carburettor Manifold From Oil System AD/B-2/17

 Seat Safety Bracket - Installation AD/B-2/18

 Transmission Mount Lugs - Reinforcement AD/B-2/19

 Increased Tail Rotor Control - Modification AD/B-2/20

 Conversion of Fuel Pump Model RD 7790D3 and E to G AD/B-2/21

 Seat Back Adjustment Wire - Removal AD/B-2/22

 Main Rotor Blades - Inspection and Replacement AD/B-2/23

 Rudder Control Post Upper Attachment - Modification AD/B-2/24

 Tail Rotor Blade - Inspection AD/B-2/25

 Main Rotor Mast Upper Bearing - Replacement AD/B-2/26

 Tail Rotor Blades Strike Indicators - Installation AD/B-2/27

 Tail Rotor Blade Spar - Inspection AD/B-2/28 Amdt 1

 Tail Rotor Drive Shaft - Inspection and Corrosion Proofing AD/B-2/29 Amdt 1


 Retirement Life - Critical Components AD/B-2/30 Amdt 3

 Main Rotor Mast - Inspection AD/B-2/31

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.