Airworthiness Directives 2004 - Revocation and Remaking - Bell UH-1 Series Helicopters

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07766 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 Bell UH-1 Series Helicopters

 AD Name AD Number

 Tail Rotor Blades AD/UH-1/1

 Tail Rotor Slider AD/UH-1/2

 Tail Boom Vertical Spar - CANCELLED AD/UH-1/3

 Tail Rotor Yoke AD/UH-1/4

 Tailboom Vertical Fin Spar AD/UH-1/5 Amdt 2

 Main Rotor Mast and Trunnion AD/UH-1/6 Amdt 2

 Tail Rotor Grip AD/UH-1/7

 Tail Rotor Hub AD/UH-1/8

 Tail Rotor Grips AD/UH-1/9

 Tail Rotor Gearbox Duplex Bearings AD/UH-1/10

 Pillow Block Bolts and Hardware AD/UH-1/11

 Tail Rotor Driveshaft Hangar Bearings AD/UH-1/12

 42 degree Gearbox AD/UH-1/13

 Retirement Lives of Fatigue Critical Components - CANCELLED AD/UH-1/14

 UH-1 Component Review - CANCELLED AD/UH-1/15

 Main Rotor Mast P/N 204-011-450-001 & -005 AD/UH-1/16

 Tail Rotor Grips - 2 AD/UH-1/17

 Main Rotor Tension-Torsion Strap AD/UH-1/18

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.