Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Bell Helicopter Textron 212 Series Helicopters
AD Name AD Number
Emergency Exit Decals - CANCELLED AD/BELL 212/1
Main Rotor Blade - Inspection and Modification AD/BELL 212/2 Amdt 3
Main Rotor Blades - Eddy Current Inspection AD/BELL 212/3 Amdt 5
Airworthiness Limitations AD/BELL 212/4 Amdt 22
CANCELLED AD/BELL 212/5
Main Rotor Blade - Removal From Service AD/BELL 212/6
Internal Rescue Hoist Assembly - Modification AD/BELL 212/7
CANCELLED AD/BELL 212/8
Stabilizer Bar Outer Tube - Inspection - CANCELLED AD/BELL 212/9
Main Beam Cap - Inspection and Repair - CANCELLED AD/BELL 212/10
Fire Detection System - Audible Warning AD/BELL 212/11
Emergency Exits - Modification and Inspection AD/BELL 212/12 Amdt 2
Swashplate Support Assembly P/N 204-011-404-9 Replacement - CANCELLED AD/BELL 212/13
Fuel Boost Pumps - Inspection AD/BELL 212/14
Main Rotor Hub Fitting Assemblies - Inspection - CANCELLED AD/BELL 212/15
Cyclic SCAS Stops Installation - Modification AD/BELL 212/16
CANCELLED AD/BELL 212/17
Tail Rotor Pitch Horns - Inspection AD/BELL 212/18
External Cargo Suspension Kit - Load Restriction and Modification AD/BELL 212/19 Amdt 1
Emergency Float Bag Deflector - Installation P/N 212-030-629-101 L/H and - AD/BELL 212/20
Main Rotor Hub Inboard Fitting - Life Reduction - CANCELLED AD/BELL 212/21
Tail Rotor Drive Shaft - Replacement AD/BELL 212/22
Emergency Float Bag Assemblies - Modification AD/BELL 212/23
Main Gear Box Spiral Bevel Gear Inspection and Rotor Brake Quill Shaft AD/BELL 212/24 Amdt 1
Main Rotor Yoke AD/BELL 212/25 Amdt 4
Hydraulic Servo Cylinder Assembly - Spanner Link Assembly Inspection and AD/BELL 212/26 Amdt 1
Swashplate Support Assembly - CANCELLED AD/BELL 212/27 Amdt 1
Vertical Fin Forward Spar AD/BELL 212/28 Amdt 2
Emergency Flotation Installation Manual Actuation System - Modification and AD/BELL 212/29
Engine Mount Fireshield - Installation AD/BELL 212/30
Float Bags - Inspection AD/BELL 212/31
Elevator to Horn Assembly Attachment - Modification AD/BELL 212/32
Main Rotor Grip/Blade Bolt - Inspection and Rework AD/BELL 212/33
Vertical Fin Spar Cap - CANCELLED AD/BELL 212/34
Tail Rotor Trunnion Bearing Housing AD/BELL 212/35
Emergency Flotation System and Squib Valve AD/BELL 212/36 Amdt 1
Main Rotor Pillow Block AD/BELL 212/37 Amdt 1
Engine Fuel Valve Electrical Connectors P/NO MS3456W14S-5S AD/BELL 212/38
Engine Fuel Switch AD/BELL 212/39
Main Transmission Spiral Bevel Gear AD/BELL 212/40
Pitch Change Link Universal AD/BELL 212/41
Main Rotor Tension Torsion Straps AD/BELL 212/42
Bogus Pressure Gauge Emergency Floats P/N 212-073-905- 1 AD/BELL 212/43
Swashplate Outer Ring AD/BELL 212/44
Tailboom Upper Longeron Splice AD/BELL 212/45
Main Rotor Drag Brace Assembly AD/BELL 212/46
Lower Planetary Spider Gear AD/BELL 212/47
Tension Torsion Straps Retention Pins AD/BELL 212/48
Tail Rotor Driveshaft Hangar Bearings AD/BELL 212/49
Swashplate Support AD/BELL 212/50
Fin To Tail Boom Junction AD/BELL 212/51
Main Driveshaft and Tail Rotor Drive Over-Temperature Indicators AD/BELL 212/52
Main Rotor Yoke AD/BELL 212/53
Main Transmission Lower Planetary Spider AD/BELL 212/54
Main Rotor - Pillow Block Attachment Bolts AD/BELL 212/55 Amdt 1
Tailboom Doubler AD/BELL 212/56
Hydraulic Servo Actuator Shoulder Bolt AD/BELL 212/57
Fuel Line Replacement AD/BELL 212/58
Tail Rotor Yoke AD/BELL 212/59
This AD yet to be Issued AD/BELL 212/60
Main Hydraulic Servo Actuator Rod End Lock Washer AD/BELL 212/61
Tail Rotor Counterweight Bellcrank Retention Nut AD/BELL 212/62
Tail Rotor Blade Fwd Tip Weight Retention Block and Aft Tip Closure AD/BELL 212/63
Vertical Fin Spar AD/BELL 212/64
Main Rotor Tension-Torsion Straps - 2 AD/BELL 212/65
Main Rotor Grip AD/BELL 212/66