Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Bell Helicopter Textron 205 Series Helicopters
AD Name AD Number
Airworthiness Limitations AD/BELL 205/1 Amdt 32
Tail Rotor Yoke - Inspection AD/BELL 205/2
Main Rotor Blade - Modification AD/BELL 205/3
Superseded by AD/BELL 205/1W - CANCELLED AD/BELL 205/4
Superseded by AD/BELL 205/1W - CANCELLED AD/BELL 205/5
Cyclic Control Supports - Inspection AD/BELL 205/6
Tail Rotor Blade Grip - Inspection AD/BELL 205/7
Superseded by AD/BELL 205/46 - CANCELLED AD/BELL 205/8
Servo Cylinder Upper Control Tube Fittings AD/BELL 205/9
205A/A1 Tail Boom Vertical Fin Forward - Inspection and Modification AD/BELL 205/10
Superseded by DCA/BELL 205/1 Amdt4 - CANCELLED AD/BELL 205/11 Amdt 1
Superseded by AD/BELL 205/46 - CANCELLED AD/BELL 205/12 Amdt 2
Float Installation - Inspection and Modification AD/BELL 205/13 Amdt 1
Superseded by DCA/BELL 205/25 Amdt1 - CANCELLED AD/BELL 205/14
Tail Rotor Hub Assembly - Inspection AD/BELL 205/15
Fire Detection System - Audible Warning AD/BELL 205/16
Hydraulic Fluid Temperature Indicators - Installation AD/BELL 205/17
CANCELLED AD/BELL 205/18 Amdt 1
Transmission Support Case - Inspection AD/BELL 205/19 Amdt 1
CANCELLED AD/BELL 205/20 Amdt 2
Swashplate Scissors Lever Bolts - Inspection AD/BELL 205/21
Transmission Oil System - Inspection AD/BELL 205/22
Main Rotor Blades AD/BELL 205/23 Amdt 4
CANCELLED AD/BELL 205/24
CANCELLED AD/BELL 205/25 Amdt 3
Fire Extinguisher Cartridges - Inspection AD/BELL 205/26
CANCELLED AD/BELL 205/27
Main Rotor Blade - Removal From Service AD/BELL 205/28
Main Rotor Blade Bolt Washer - Inspection AD/BELL 205/29
Stabilizer Bar Outer Tube - Inspection - CANCELLED AD/BELL 205/30
Tail Boom Attachment Fitting and Longerons - Inspection AD/BELL 205/31 Amdt 1
Main Beam Cap - Inspection and Repair AD/BELL 205/32
Synchronised Elevator - Inspection, Modification and Retirement AD/BELL 205/33
Emergency Exits - Modification and Inspection AD/BELL 205/34 Amdt 2
Swashplate Support Assembly - Retirement Life AD/BELL 205/35 Amdt 1
Fuel Boost Pumps - Inspection AD/BELL 205/36
Main Rotor Hub Fitting Assemblies - Inspection AD/BELL 205/37
CANCELLED AD/BELL 205/38
CANCELLED AD/BELL 205/39
Tail Rotor Pitch Horns - Inspection AD/BELL 205/40
External Cargo Suspension Kit - Load Restriction and Modification AD/BELL 205/41 Amdt 1
Main Rotor Hub Inboard Fitting - Life Reduction AD/BELL 205/42
Engine Air Inlet Screen - Inspection AD/BELL 205/43
Cyclic Control Cylinder Assembly - Inspection of Piston Rods AD/BELL 205/44
Main Rotor Yoke AD/BELL 205/45 Amdt 4
Anti-Torque Control System - Modification to Pushrod Status AD/BELL 205/46
Hydraulic Servo Cylinder Assembly - Spanner Link Assembly Inspection and AD/BELL 205/47
Fuselage Main Beams Splice - Modification AD/BELL 205/48
Elevator to Horn Assembly Attachment - Modification AD/BELL 205/49
Main Rotor Grip/Blade Bolt - Inspection and Rework AD/BELL 205/50
Vertical Fin Spar Cap AD/BELL 205/51 Amdt 1
Tail Rotor Trunnion Bearing Housing AD/BELL 205/52
Main Rotor Pillow Block AD/BELL 205/53
Main Transmission Spiral Bevel Gear AD/BELL 205/54
Pitch Change Link Universal AD/BELL 205/55
Tail Rotor Hub P/N 204-011-801-121 AD/BELL 205/56
Bogus Tension Torsion Straps AD/BELL 205/57
Time Expired Tail Rotor Yoke AD/BELL 205/58
Swashplate Outer Ring AD/BELL 205/59
Tail Rotor Driveshaft Hangar Bearings AD/BELL 205/60
Main Transmission Lower Planetary Spider AD/BELL 205/61
42 Degree Tail Rotor Drive Gearbox AD/BELL 205/62
Tail Rotor Yoke AD/BELL 205/63
This AD yet to be issued AD/BELL 205/64
Vertical Fin Spar Cap AD/BELL 205/65
Main Rotor - Pillow Block Attachment Bolts AD/BELL 205/66
Main Hydraulic Servo Actuator Rod End Lock Washer AD/BELL 205/67
Tail Rotor Counterweight Bellcrank Retention Nut AD/BELL 205/68
Tail Rotor Grip AD/BELL 205/69
Tail Rotor Blade Fwd Tip Weight Retention Block and Aft Tip Closure AD/BELL 205/70
Main Rotor Tension-Torsion Strap AD/BELL 205/71
Main Rotor Grip AD/BELL 205/72