Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Airparts (NZ) Ltd. FU 24 Series Aeroplanes
AD Name AD Number
Elevator Control Cables and Pulleys - Inspection AD/FU24/1 Amdt 2
Structural Component - Corrosion - Inspection AD/FU24/2 Amdt 1
CANCELLED AD/FU24/3
Elevator Balance Horn Attachment - Modification - CANCELLED AD/FU24/4
Elevator Trim Tab Brackets - Modification AD/FU24/5
Elevator Lower Pulley Station 337 - 340 - Modification - CANCELLED AD/FU24/6
Wing Spar - Inspection - CANCELLED AD/FU24/7 Amdt 2
Aileron Rib Assembly - Modification - CANCELLED AD/FU24/8
Auxiliary Fuel Pump Switch - Modification - CANCELLED AD/FU24/9
Fuel Sump Corrosion - Inspection AD/FU24/10
Fin Rib and Skin Cracking - Inspection AD/FU24/11
Rudder Lowr Rib - Inspection AD/FU24/12
Fuel Tank Vent System - Modification - CANCELLED AD/FU24/13
Hopper and Spray Tank Installation - Modification AD/FU24/14
Main Landing Gear Axle Socket - Inspection AD/FU24/15
Rudder Top Hinge Rivnuts - Modification - CANCELLED AD/FU24/16
Aileron Mass Balance Arms - Modification AD/FU24/17
Fuselage Skin Panels - Inspection - CANCELLED AD/FU24/18
Engine Mounts and Firewalls AD/FU24/19
CANCELLED AD/FU24/20
CANCELLED AD/FU24/21
CANCELLED AD/FU24/22
CANCELLED AD/FU24/23
CANCELLED AD/FU24/24
CANCELLED AD/FU24/25
CANCELLED AD/FU24/26
CANCELLED AD/FU24/27
CANCELLED AD/FU24/28
CANCELLED AD/FU24/29
CANCELLED AD/FU24/30
Elevator Hinge and Attachment Fittings AD/FU24/31 Amdt 1
CANCELLED AD/FU24/32
CANCELLED AD/FU24/33
CANCELLED AD/FU24/34
CANCELLED AD/FU24/35
Fuselage Structure - Modification AD/FU24/36
Elevator Horn Assembly - Inspection AD/FU24/37
Main Landing Gear Lower Torque Link - Modification AD/FU24/38
Cleveland Wheel and Brake Assembly - Inspection AD/FU24/39
Cockpit Ventilators - Modification AD/FU24/40
Pilot Restraint Installation - Modification AD/FU24/41
Installation of No Step Placard AD/FU24/42
Installation of Crash Axes AD/FU24/43
Part 1. Wing Spar Modification, and Part 2. Wing Spar Inspection AD/FU24/44
Fuel Quantity Indication - Modification AD/FU24/45
Brake Torque Plates - Inspection and Modification AD/FU24/46
Cockpit Bulkhead - Modification AD/FU24/47
Tailplane Mass Balance Weight and Control Horn - Inspection and Modification AD/FU24/48
Centre Wing, Outboard Rear Fitting - Inspection and Modification AD/FU24/49
Control Column Grip - Inspection AD/FU24/50
Fin Forward Attachment Fitting AD/FU24/51 Amdt 2
Fuel Line - Modification AD/FU24/52
Flap Control Torque Tube - Inspection AD/FU24/53 Amdt 1
L.H. Rudder Pedal - Inspection AD/FU24/54
Oil Pressure Gauge Line - Fitment of Restrictor AD/FU24/55
Engine Controls - Inspection and Modification AD/FU24/56
Shoulder Harness Inertia Reel Installation Tension Clip P/N 08-16037-3 - AD/FU24/57
Wing Structural Fatigue Limitation AD/FU24/58 Amdt 1
Rudder Torque Tube to Rudder Attachment - Inspection AD/FU24/59
Engine Control Cables - Life Limitations - CANCELLED AD/FU24/60 Amdt 2
Main Landing Gear Torque Link Brackets - Inspection/Replacement AD/FU24/61
Forward Fin Structure AD/FU24/62
Main Spar Web AD/FU24/63