Airworthiness Directives 2004 - Revocation and Remaking - Aerospatiale Rallye Series Aeroplanes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07701 In force Legislative Instrument

Legislation content

 Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 Aerospatiale Rallye Series Aeroplanes

 AD Name AD Number

 Stop Washer, Aileron Front Pivot - Installation AD/MSR/1

 Tab Control Pinion on Shaft - Modification AD/MSR/2

 Spot Welding of Skin to Rear Fuselage Frame - Inspection AD/MSR/3

 L/H Fuel Supply Hose - Replacement Fuel Gauge Vent - Modification AD/MSR/4

 Horizontal Stabiliser Front Attachment Brackets - Inspection and Modification AD/MSR/5 Amdt 1

 Leading Edge Slats - CANCELLED AD/MSR/6

 Fuel Pressure Gauge Line - CANCELLED AD/MSR/7

 Engine Cooling - Modification AD/MSR/8

 Fuel System - Fuel Gauge Ball - Replacement AD/MSR/9

 Firewall Sealing - Modification AD/MSR/10

 Flexible Hoses in Engine Compartment - Installation AD/MSR/11 Amdt 1

 Elevator Control Rod - Inspection AD/MSR/12

 Carburettor Heat Butterfly - CANCELLED AD/MSR/13

 Carburettor Heat Butterfly - CANCELLED AD/MSR/14

 Elevator Bell Crank - Replacement AD/MSR/15 Amdt 1

 Firewall Engine Mount Attachment Fittings - Inspection AD/MSR/16

 Central Front Horizontal Stabiliser Attachment Bracket - Inspection and  AD/MSR/17

 Engine Mount AD/MSR/18 Amdt 2

 Front Seat Restraint Installation - Modification AD/MSR/19

 Engine Cowling Attachment Locks - Modification AD/MSR/20

 Front Seat Support Beam Protection - Installation AD/MSR/21

 Rear Fuselage Structure - Inspection AD/MSR/22

 Wing Attachment Fittings - Inspection AD/MSR/23

 Wing Flap System - Inspection AD/MSR/24

 Carburettor Heat Valve - Modification AD/MSR/25

 Wing Structural Fatigue Life Limitation AD/MSR/26

 Corrosion - Inspection AD/MSR/27 Amdt 1

 Horizontal Stabilizer Spar and Attachment Fittings AD/MSR/28 Amdt 1

 Engine Mount AD/MSR/29

 Nose Landing Gear Attachment Fitting AD/MSR/30 Amdt 1

 Nose Landing Gear - Yoke Pivot Assembly AD/MSR/31

 Nose Landing Gear - Wheel Axle AD/MSR/32

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.