AD/SKY ARROW/3 - Throttle Stop

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B07030 In force Legislative Instrument

Legislation content

 

 

AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.


 

Iniziative Industriali Italiane Sky Arrow 650 Series Aeroplanes

 

AD/SKY ARROW/3 Throttle Stop 3/2004 DM

 

Applicability: Sky Arrow Model 650TC, 650TCN and 650TCNS aircraft as detailed by serial number in Iniziative Industriali Italiane Service Bulletin SB-C No. 01/03 Revision 1 and not incorporating part number (P/N) R05000-11/01 throttle stops.

 

Requirement: 1. Inspect the throttle lever stops in accordance with Chapter 4 of Iniziative Industriali Italiane Service Bulletin SB-C No. 01/03 Revision 1.

 

2. Replace the throttle lever stops in accordance with Chapter 5 and Chapter 6 of Iniziative Industriali Italiane Service Bulletin SB-C No. 01/03 Revision 1.

 

Note: ENAC Airworthiness Directive 2003-396 refers.

 

Compliance: Requirement 1:

 

Unless previously accomplished; before further flight and thereafter at intervals not to exceed 100 flight hours.

 

Requirement 2:

 

Prior to 30 June 2004.

 

This Airworthiness Directive becomes effective on 28 January 2004.

Iniziative Industriali Italiane Sky Arrow 650 Series Aeroplanes

 

AD/SKY ARROW/3 (continued)

 

Background: This directive has been issued in response to a report of worn throttle lever stops resulting in an engine stopping in flight. Worn throttle stops required the pilot to exert a high level of force to move the throttle. In the engine stoppage event, when attempting to close the throttle during landing approach, the butterfly control arm was forced beyond the idle position.


James Coyne

Delegate of the Civil Aviation Safety Authority 21 January 2004

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


The above AD is notified in the Commonwealth of Australia Gazette on 28 January 2004.

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.