AD/SEATS/24 Amdt 1 - RECARO Passenger Seat Type 3410 - Seat Belt Attachment

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B06930 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE


On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/SEATS/24 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

 

Seats and Berths

 

AD/SEATS/24

Amdt 1


RECARO Passenger Seat Type 3410 - Seat Belt Attachment


10/2004

 

Applicability: RECARO Aircomfort Passenger Seat Type 3410, Part Number Series 302, 303, 306,

307, 314, 316, 317, 791, 792, and 795; with serial numbers listed in RECARO Aircraft Seating Service Bulletin (SB) 3410-25MR477 Revision 3, dated 17 May 2004, or a later LBA approved revision.

 

Requirement: Action in accordance with the Accomplishment Instructions of RECARO Aircraft Seating SB 3410-25MR477 Revision 3, or a later LBA approved revision.

 

Note: LBA AD D-2004-151 R1 refers.

 

Compliance: Within 60 calendar days after 30 September 2004.

 

This Amendment becomes effective on 30 September 2004.

 

Background: A report was received of detached connecting bolts of a seat belt attachment fitting at the outboard seat spreader on a RECARO Type 3410 seat. This Directive requires incorporation of longer bolts to ensure adequate engagement with the locknuts.

 

Amendment 1 is issued in response to a revision of the related LBA AD, which introduces the latest revision of the Requirement document which changes seat serial number applicability.

 

The original issue of this Directive became effective on 10 June 2004.


David Villiers

Delegate of the Civil Aviation Safety Authority 18 August 2004

 

 

 

 

 

The above AD is notified in the Commonwealth of Australia Gazette on 8 September 2004.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.