AD/SD3-60/31 - Air-Conditioning System

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B06876 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Short SD3-60 Series Aeroplanes

 

AD/SD3-60/31 Air-Conditioning System 12/90 DM

Applicability: All model SD3-60 series aeroplanes equipped with AAR Oklahoma, Inc. freon air conditioning systems, installed in accordance with STC SA3749SW.

 

Requirement: Action in accordance with FAA AD 90-15-07 Paragraphs A and B.

 

Note 1: Operators of affected aircraft who elect to comply with Paragraph B. 1. of the FAA AD are required to have an Australian Flight Manual amendment specifying the required action. In lieu of inserting a copy of the AD in the flight manual, operators intending to take this course of action must prepare and submit a suitable flight manual to their local CAA Field Office for Approval.

 

Note 2: Copies of FAA AD 90-15-07 may be obtained by contacting Mr Sam Lovell, Airplane Certification Office, FAA, South-west Region, Fort Worth, Texas, 76193- 0150. Telephone (817) 624-5159; Copies of the AAR Oklahoma Inc. Service Information Letter 5-90-1 dated June 7 1990 referred to in the FAA AD may be obtained from AAR Oklahoma Inc., 6611 S. Meridian Avenue, PO Box 59100, Oklahoma City, Oklahoma 73159. Copies of both these Documents may also be viewed at local Civil Aviation Authority (CAA) Field Offices or the CAA Head Office, Continuing Airworthiness Documentation Section, Alan Woods Building, 25 Constitution Avenue, Canberra City ACT.

 

Compliance: As specified in the Requirement Documents, however the effective date referred to in the Requirement document is to be 6 October 1990.

 

Background: This AD has resulted from reports of arcing, burnt wires, and smoke in the cockpit due to wiring terminals which are too large for the studs to which they are connected. This condition, if not corrected, could result in an electrical fire and subsequent loss of essential equipment or flight instruments.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.